Top 3d Printer Bed 2

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro

  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X.
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X.
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform..
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

8 Pieces 3D Printer Heat Bed Leveling Parts Silicone Solid Column OD 0.63 Inch ID 0.16 Inch Stable Hot Bed Tool Heat-Resistant Buffer Compatible with CR-10 Ender 3 Bottom Connect Black

  • Material: 3D printer heat bed parts are made of heat-resistant silicone, solid bed mounts is very stable, not shaking, heat-resistant and....
  • Function: larger contact surface than spring, reduce shock, heatbed silicone leveling column better to level your 3D printer.
  • Size: the outer diameter 16 mm/ 0.63 inch, inner diameter 4 mm/ 0.16 inch, height is 18 mm/ 0.71 inch.
  • This heat-resistant and pressure-resistant....
  • Application: replace original spring leveling for 3D printer hot bed platform.
  • Simple installation, no need complicated tools, convenient for using.
  • Package includes: there are 8 pieces heat bed silicone leveling column, enough to meet your need, suitable for 3D printer hot bed and platform bottom....
Check Stock

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

  • 【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
  • 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
  • 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
  • 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
  • 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room....
Check Stock

Creality TPU 3D Printer Filament 1.75 mm - Black | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance ±0.02 mm | Fit Most FDM Printers (1 Pc/Pack)

  • SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – Black | Dimensional Tolerance +/- 0.02 mm | Shore Hardness: 95A | Speed: 20-60mm/ | Recommended Nozzle Temperature: 215-235 ℃ | Recommended heat bed settings: No heat/ 60-80℃.
  • MATERIAL - With outstanding bed adhesion, no heated bed requirements, minimal warping, and abrasion resistance much higher than any other standard printing material, the uses and possibilities that TPU uncovers have revolutionized 3D printing for people around the globe..
  • UNIQUE FEATURES - Creality TPU 3D Printer filament is Soft adhesive with high elastic, Chemical resistance and environmental resistance, Waterproof and moisture proof and Environmental protection. The printing model is resistant to wear and scratch, with good aging resistance..
  • FIT MOST FDM PRINTERS - Creality TPU 3D printer filament is compatible with all FDM printers of Creality 3D, and you can create your artwork with this filament of high quality in just a few simple steps..
  • CHEMICAL RESISTANCE - TPU 3D Printer filament have Excellent chemical resistance (water resistance, oil resistance, solvent resistance) and environmental resistance, environmental protection, and nontoxic..
Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

  • 【Intelligent Detection】Crealtiy CR Touch adopts multi-point detection intelligent compensation technology. CR touch is an automatic leveling accessory for 3d printer platform independently developed by Crealtiy. It is more stable than the traditional BL touch leveling function, and you can get better quality with less money product upgrade..
  • 【Strong Compatibility】CR Touch 3d printer auto-leveling is compatible with all printing platform materials such as PEI/sticker bed/glass bed/metal bed, etc. No matter what kind of printing platform material you use, it can adapt and work stably..
  • 【Longer Service Life】 Crealtiy CR Touch has been upgraded to a metal probe, which is more durable and can reduce the wear caused by daily use, thereby greatly increasing the service life of the probe, 0-6mm extension length, 0.04mm repeat positioning accuracy, automatic leveling , can be reused more than 100,000 times..
  • 【Compatible Models】This kit includes 3 different mounting brackets and extension cables. You can install it easily, and it can be adapted to more Crealtiy 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7....
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • 【PACK of 3】Our 3D Printer build plates are 16" x 16" (400mm x 400mm) square, fully matches heated bed on many popular 3D printers, such as Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Com....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Pink PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Pink PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Pink - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience),....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Silver PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experien....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Red PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), U....
Check Stock