Top 3d Printer Hot End

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

TRONXY XY-3 SE 3D Printer,Dual Color 3D Printer with Dual Extruder,&Laser Engraving 3 in 1 with Glass Plate Smart Auxiliary Leveling,Printing Size 10.03 x10.03 x10.23 &Engraving Size7.48 x10.03

  • ★★★★★【Warm Reminder】: The shipped version is the latest version, and the part of the step-down device has been cancelled. Laser....
  • ★★★★★【Multi Function 3D Printer】XY-3 SE 3D Printer integrates the functions of 3d printing and laser engraving to meet your more....
  • ★★★★★【Dual Color Printing】Dual extruder module and 2-in-1-out hot end- Dual extruder realize printing two colors on same piece, You can....
  • ★★★★★【Support Malin Firmware】The malin firmware one of advantage is open-source. It allows users to adjust to their specific needs with....
  • ★★★★★【After-Sales Service】TRONXY will offer lifetime technical support, response within 24 hours, definitely give you a satisfied answer....
Check Stock

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....
Check Stock

8 Pieces 3D Printer Heat Bed Leveling Parts Silicone Solid Column OD 0.63 Inch ID 0.16 Inch Stable Hot Bed Tool Heat-Resistant Buffer Compatible with CR-10 Ender 3 Bottom Connect Black

  • Material: 3D printer heat bed parts are made of heat-resistant silicone, solid bed mounts is very stable, not shaking, heat-resistant and....
  • Function: larger contact surface than spring, reduce shock, heatbed silicone leveling column better to level your 3D printer.
  • Size: the outer diameter 16 mm/ 0.63 inch, inner diameter 4 mm/ 0.16 inch, height is 18 mm/ 0.71 inch.
  • This heat-resistant and pressure-resistant....
  • Application: replace original spring leveling for 3D printer hot bed platform.
  • Simple installation, no need complicated tools, convenient for using.
  • Package includes: there are 8 pieces heat bed silicone leveling column, enough to meet your need, suitable for 3D printer hot bed and platform bottom....
Check Stock

Artillery Sidewinder X2 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Filament Resume Printing After Power Failure, Build Size 11.81x11.81x15.75in

  • 【Large Color Touch Screen Controller & Auto Leveling】- The high precision laser printer is equipped with a large size color touch screen controller with printing status/function display/parameter setting all transparently presented, which makes operation easy and convenient. What's more, with automatic bed leveling, the printer supports dynamic leveling compensation, frees yuo from complex manual leveling, which proves to be efficient and intelligent..
  • 【Fast Heating Bed with Super High Heat Resistance】- The 3D Printer is equipped with glass-ceramic print platform & improved AC heat bed. The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness..
  • 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the....
Check Stock

Artillery Genius Pro 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Auto Leveling, Desktop DIY Tool, Xmas Gifts for Him, Build Size 8.7x8.7x9.8inch

  • 【Large Color Touch Screen Controller & Auto Leveling】- The high precision laser printer is equipped with a large size color touch screen controller with printing status/function display/parameter setting all transparently presented, which makes operation easy and convenient. What's more, with automatic bed leveling, the printer supports dynamic leveling compensation, frees yuo from complex manual leveling, which proves to be efficient and intelligent..
  • 【Fast Heating Bed with Super High Heat Resistance】- The 3D Printer is equipped with glass-ceramic print platform & improved AC heat bed. The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness..
  • 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the....
Check Stock

3D Printer Wheels 3D Printer Polycarbonate Pulley Wheels 625zz Pulley Linear Bearing Compatible with Creality CR10 Ender 3 Anet A8 3D Printer Accessories 20 Pieces

  • Reliable material: made of polycarbonate, its nice wear resistance, flame retardancy and oxidation resistance can assist your 3D printer to complete....
  • Broad compatibility: it's applicable for most DIY 3D printer's V slot aluminum profile, including, but not limited for Creality, Ender 3, Anet, etc..
  • Nice expressiveness: these 3D printer wheels move smoothly, have low noise, have high printing accuracy, and can nicely increase the printing speed,....
  • Package includes: you will receive a package containing 20 pieces 3D printer polycarbonate pulleys, which are suitable for most DIY 3D printers and....
  • Wide range of uses: they are not only mainly applied for 3D printers, but also for engravers, hot wire machines, laser cutters, camera sliders, plasma....
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

5PCS Creality 3D Printer NTC Thermistor 100K NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Voxelab Aquila XH2.54-2P Connector 1m/39.4inch

  • Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors..
  • Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying..
  • After-sales Service: If you have any unsolvable problems during using this product, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Haosegd 5 Colors PLA Filament 3D Printing Filament 1.75MM 250G 3D Printer PLA Filament 1250G in Total No Clogging & Bubbles Neat Winding High Precision Art Toy Cars Model

  • 3D Printing Filament Temperature: The nozzle temperature setting for printing with PLA is 190-210 degree. Our engineers recommend starters set 200 degree of printer nozzle and 55 degree of hot bed for getting excellent printing effect..
  • 3D Printer Filament Neat Winding: This pla filament has undergone strict manual inspection to ensure that the PLA filaments are neat and easy to feed and suitable for most 3D printers on the market..
  • 1.75MM PLA Filament Application: The PLA 3D printer filament bundles are used in 3D printers,which can be used to print medical skeletons, games, flower decorations, animal toy models, art decorations and practical tools etc..
  • 3D Printer Filament First Choice：The pla filament is very safe and only has a small odor. It has strong layer adhesion, good melt and smooth feeding. It is your first choice whether considering safety factors or practical aspects..
  • 3D Printer Filament Bundle Multiple colors: The colors of this combination are diverse and beautiful. There are five color-White, Black, blue, Purple and Red, included in the package. You can use them to print models with different colors..
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • ....15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the hot end of the machine.
  • And the supporting tools make it more convenient for you to install and save your time.
  • High precision: the inner wall of the 3D prin....
Check Stock