Top 3d Printer Under 50000

KACSOO Mini 3D Printer for Beginners, Building Size 100 x 100 x 100MM Portable Desktop with 10M 1.75mm PLA Filament, Magnetic Removable Plate (Blue)

  • Excellent Printing Performance:The mini 3D printer has a printing size of 100*100*100mm, Fits 1.75mm diameter PLA and TPU filament. The accuracy is 0.1mm, which allows a smooth and beautiful printing performance..
  • Quick Assembly:This 3D printer kit contains 3 main parts. According to our instruction manual, it only takes 5 minutes to complete the assembly.If you cannot move the shaft of the printer, please check if the connecting cable is loose..
  • Simple Operation:User can set Filament feed-in or draw out with the buttons of + and -.it is already 99% Pre-Assembled Entry-Level Printer. There are three DIY modules in total, which can be completed in 5 minutes under the guidance of the manual..
  • Stable & Ultra Silent:The 3D printer is compact and sturdy, it keeps stable while printing and the working noise is lower than 60 db, so you will not be disturbed by noise when working or sleeping. You can complete various artworks,handicrafts and samples successfully..
  • Package & Service:3D printer x1, Screwdriver x1, Power adapter x1, USB data line x1, Filament bracket set x1, Printing Filament x10M, TF Card x1, Card Reader x1, Canual x1. We provide you with 24 hours after-sales service..
Check Stock

Monoprice Replacement 3D Printer Extruder Maker Select Mini for PID 15365, 21711 and Mini PRO 33012

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Moonrise rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service & support: you're never on your own with Moonrise products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase.
Check Stock

Monoprice Replacement Nozzle Designed for Monoprice Ultimate 2 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or....
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and....
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products. We have a full team of friendly and knowledgeable technicians available to....
Check Stock

Greensen Printer Stand with Storage, Metal Printer Cart, Easy-Install Printer Stand for Desk, Heavy Duty Printer Table, Printer Shelf with Deep Storage Basket, Printer Desk, Printer Stand Under Desk

  • 【Easy and Efficient Installation】 Following the video instructions, you'll have this printer table for home office assembled in minutes..
  • 【On/Under Desk Storage】 By installing or removing tires, Greensen 3d printer table can be used as On/Under Desk Storage..
  • 【Reliable Metal Material】With classic metal manufacturing craft, which is definitely more durable, sturdy, stable, safer than the plastic one, Greensen under desk printer stand can support your printer more durable, preventing the printer from falling down..
  • 【Thick and Strong Structure】 Come with 2.2" top shelf, including the 0.7" thick wood tray and 1.5" triangular metal structure, and 3" bottom storage layer, Greensen printer table with storage can hold up to 100lb..
  • 【Flexible Storage Solution】 Rolling by 4 wheels, which is flexible and lockable (2 lockings), the Greensen printer stand under desk could be slid in and out smoothly when under the table. The suitable size (16.14"×12.21"×15.35") makes it move freely without blocking the way. It also can be used as a coffee cart, garage tool cart, snack cart, game equipment cart, projector trolley, etc..
Check Stock

AMOLEN PLA 3D Printer Filament, 1.75mm, Tri Color Changing with Temperature, Pine Green to Brown to Yellow,1KG

  • ✔TEMPERATURE COLOR CHANGE - Under 30ºC it looks pine green and above that it starts getting brown, and when the temperature is above 45ºC, it starts getting yellow. Please note that this type of filaments should avoid long-time direct sunlight exposure. The longer the exposure time, the faster the color fade..
  • ✔SMOOTHLY PRINT - AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔HIGH PERFORMANCE - Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • 【PACK of 3】Our 3D Printer build plates are 16" x 16" (400mm x 400mm) square, fully matches heated bed on many popular 3D printers, such as Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Com....
Check Stock

MINGDA Removable Magnetic Build Plate Flexible Heatbed Mat 235x235mm for 3D Printer Hot Bed Platform

  • 【PACK of 4】The 220mmx220mm (8.7" x 8.7") 3D Printer build plate is fully matches heated bed for large format printers such as the Creality MK2,....
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature....
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides....
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible....
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer a 90 day money back guarantee!.
Check Stock

Tattoos

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

The Cheap Detective

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Blue

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Natural

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock