Top 3d Printer

MakerBot-MP05779 PLA Filament, 1.75 mm Diameter, Large Spool, Red

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05783 PLA Filament, 1.75 mm Diameter, Large Spool, Warm Gray

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

15g 3D Printer Glue Sticks, Aitrip 2Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

  • 【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
  • 【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
  • 【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
  • 【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
  • 【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....
Check Stock

SIMAX3D 3D Printer Rollers Polycarbonate Gantry Wheels v Slot 13pcs/Pack Clear Ender 3 Bed Wheels 625zz for Creality Ender Rollers Artillery Sidewinder x1 Rollers

  • Package Include: 3D Printer Rollers Polycarbonate *13pcs.
  • This 3D Printer Pulley wheel Polycarbonate is transparent..
  • Our v slot pom pulley wheels Polycarbonate Wheels can replace with Gantry wheels, Ender 3 Rollers, Ender 3 v2 Rollers, Ender 5 Rollers, Artillery....
  • SIMAX3D 3D Printer pulley wheels Polycarbonate Outer Diameter: 24mm, Inner. diameter: 5mm, Height: 10.23mm.
  • Switch your 3D printer wheels after 6-9 months use will extend your 3D printer life..
Check Stock

3D Printers, Mini 2-in-1 3D Laser Engraver Printer with Removable Heated Bed, DIY Desktop 3D Printers for Beginners with PLA Filament, Smart Control, Resume Printing, 90% Pre-Assembled

  • 3D Printer for Beginners - The CRUX-1 is an intuitive and user-friendly 3D printer that's perfect for both professional users and beginners. Its 2.8-inch LCD touchscreen displays the real-time printing progress and supports eight languages, making it easy for everyone to use. Unlike other products with exposed power supplies, the CRUX-1 has an integrated modular design that includes a built-in power supply for enhanced safety. Enjoy the fun of DIY 3D printing!.
  • 2-in-1 Innovative 3D Laser Printer - The CRUX-1 2-in-1 3D Printer unleashes your full creative potential, allowing you to switch between 3D printing and laser engraving. Its large rotary nuts make the leveling process easier, while the hotbed comes with a replaceable fiberglass sheet. The printer is compatible with Windows, Mac OS, and Linux systems, and you can operate it through a TF card, USB flash drive, or USB cable (which is included)..
  • Lightweight and Portable 3D Printer - This mini FDM 3D printer is lightweight, portable, and quick to assemble. Its compact size of 7 x 7 x 7 inches (180 x 180 x 180mm) makes it ideal for students and DIY enthusiasts. It comes with a convenient handle for easy ....
Check Stock

Official Creality Ender 2 Pro 3D Printer, Mini 3D Printer with Silent Board Removable Magnetic Build Plate Lightweight and Portable Printing Size 6.5x6.5x7inch, 3D Printer for Kids and Beginners

  • 【Excellent 3D Printer for Kids and Beginners】As an entry-level printer, ender-2 pro is easy to assemble and operate. You do not have to spend much time to learn how to use it, allowing kids and beginners to get involved in the beautiful culmination of creativity and science with 3D Printing..
  • 【Light and Portable】You can take this printer to anywhere easily since it is only 10 pounds weight. And due to its small size, it is prefect for office, dorm room and classroom..
  • 【Easy and Fast Assembly】Ender-2 Pro is 90% Preinstalled which makes this 3D printer mini is convenience to use when you Just Receive It, Only 7 Screws You Need to Tight..
  • 【Simple but Stable Structure】Unlike the Ender 3Pro or Ender 3V2, this printer takes a cantilever structure. The easier structure makes the 3d printer more lightweight. This small 3d printer takes an extra Z-axis fixed block, it can remain stable throughout the entire printing process..
  • 【Low Noise】Creality Ender 2 Pro comes with silent board. The desktop 3D printer finishes every printing model quickly and efficiently, never disturbs kids rest when performing in quiet working mode..
Check Stock

CDMZJJ PLA 3D Printer Filament, 1.75mm 3D Printing Consumables Bundle 1KG/2.2lb, 0.25KG/Spool 4 Colors Pack - Black, Blue, White, Red

  • 4 in 1 Bundle 3D Printer Filament: Comes with 1KG/2.2lb 3D printer filament with 4 most popular colors: blue, black, white, red. 4 spools in one package, packed in vacuum sealed bag, each spool filament net weight is 0.25KG/0.55lb..
  • Dimensional Accuracy & Consistency: PLA 3D Printer Filament, 1.75mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing..
  • Premium PLA Filament: Eco-friendly and low odor, tangle-free, clog-free, bubble-free, melt well and feed smoothly, perfect 3D Printer PLA filament for smooth and stable 3D printing experience, provides excellent surface finish of printed parts..
  • Wide Compatibility: 1.75mm diameter printing filament, works perfectly with diverse 3D printers and 3D printing pens that use 1.75mm filament on the market..
  • 3D Printer PLA Filament Using Tips: Recommended printing temperature: 200?-230?. Recommended printing speed: 50-100mm/s for better printing results..
Check Stock