Top 3hp Dc Motors

PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case

  • PARAMETER — working voltage DC 3.3-30V.
  • DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
  • APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
  • for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
  • PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
  • EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Check Stock

Truck Upfitters Surface Mounted 100A Circuit Breaker (12V-48V, 100 Amp) for DC Automotive and Marine/Boat use: Main Power Breaker, Audio, Winches, Solar, Lighting, Electric Motors & Other Accessories.

  • ... simply as a DC 100 amp circuit breaker. This is a 12-48 volt DC (Direct Current) fuse breaker & CANNOT be used IN ANY AC (Alternate Current) OR HOUSEHOLD APPLICATION..
  • Be sure to consult your owner's manual when being used for your trolling motor plug and receptacle. Typically a 100 amp fuse is used on 12V trolling motors with 30, 40, or 45 lbs of thrust, 24V trolling motors with 70 lbs of thrust, & 36V trolling motors with no more than 100 lbs of thrust. A pair of 6 AWG copper lugs are included in this kit, but please verify that a AWG gauge trolling motor wire will be thick enough to handle your specific volt trolling motor plug..
  • Always consult a 12-48V DC wiring specialist if you are unsure about how to determine what type (this is a DC), amp (this is a 100A), and volt circuit breaker you require for your vehicle & vehicle accessories. A 1-300 amp circuit tester can be used to determine the draw of an accessory during initial, peak, and normal operation of the accessory, but this inline breaker is not a substitute for a sound professional installation. Always consult a professional before installation..
Check Stock

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

52 Inch Minimalist Style DC Motor Ceiling Fan with LED Light, Reversible Motor and 3 ABS Blades, ETL Listed Indoor Ceiling Fans for Kitchen Bedroom Living Room, 6-Speed Remote Control

  • MINIMALIST STYLE: This 52-inch indoor ceiling fan has 3 powerful blades to make your home more comfortable.
  • their walnut finish attractively compliments any home decor from rustic industrial to minimalist.
  • REVERSIBLE FAN: It has 3 blades designed for high volume air movement and rotates in reversible direction for changing seasonal needs and has remote controlled operation..
  • REMOTE CONTROL: The convenient remote control allows you to adjust this fan's 6 speeds and 3 timer settings (1/4/8 hr.) from anywhere around your room, whether lying in bed, eating at the dining room table, or relaxing on your living room couch.
  • DC MOTOR: DC motor is energy efficient and ETL listed and has convenient wall holder for remote storage. These fans save on operating costs with energy efficient DC motors. They save up to 65% more efficient than traditional AC fan motors..
  • NOTICE: The DC motor can only work properly after the blades are installed (with load), so we recommend that you also install the blades during the installation test.
Check Stock

20KG Big Load 4WD All Metal Mecanum Wheel Robot Car Chassis Kit Platform with DC 12V Encoder Motor for Arduino ROS Project

  • This 4 mecanum wheels is compatible with all DC motors with a motor shaft diameter of 6mm..
  • 78mm All Black mecanum wheel made of steel and rubber roller, 4pcs can load no less than 60KG..
  • 4pcs DC motor is 12V 178rpm, rated torque is 6.5KG.CM, 4pcs can load no less than 20KG..
  • The plate made of 3mm aluminum alloy materials, not easy to deform..
  • What you get: 1pcs frame, 4pcs motors, 4pcs mecanum wheels with couplings, 4pcs motor brackets, motor cables, screws..
Check Stock

Trolling Motor Plug Receptacle Set, 12V/24V/ 36V/48V Plug for Trolling Motor/ Down Rigger/Fishing Reel,Waterproof Marine Boat DC Power Connector

  • Secure trolling motors plug and receptacle set: self-locking design keep trolling motor and power supply tightly to make sure waterproof performance,and weather resistant cover & watertight cap are for more safety..
  • Maximum durable for harsh marine environment:The plug receptacle for trolling motor are made of corrosion resistant sturdy extremely solid built material, and plated brass electrical heavy duty components..
  • The marine trolling motor plug receptical are universal design for 2-wire configuration 12V, 24V, 24/36V, 12/24V, 36V or 48V systems..
  • Suit for:Our plug receptacle perfect for connecting heavy electrical current high amperage draw trolling motor, electric down riggers, deep drop electric fishing reels and other DC powered device. A must have for marine trolling motors owner of Terrova,ulterra Powerdrive terrova,Princecraft etc.
  • Great DC TO DC power connector for freshwater&saltwater,high-current application, compatible with 6 AWG larger gauge wire without overheating..
Check Stock

Rocker Switches SPST ON-NONE-OFF BLK (1 piece)

  • Heavy duty DPDT reverse polarity switch controls the up/down, clockwise/counterclockwise motion of DC loads (e.g. motors, hoists, cranes, linear actuators, etc.). Resetting automatically (returns to off) when released.
  • Built-in blue LEDs indicator. Made of strengthened high-quality plastic and well-conductive pins.
  • Prewired with 12 inches of flexible 22 AWG copper wire. Simply connect your DC power supply & Motor to the pigtail wire.
  • Fits standard .83 x 1.48 inch cutout hole. Aluminum mounting adaptor is included. The included plastic piece adapts Carling style switch openings for new Polaris Cutout.
Check Stock

Electromagnetic Power Relay, 8-Pin 10 AMP 24V AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - LY2NJ [Applicable for DIN Rail System]

  • Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc.
  • Product Name: Electromagnetic Power Relay.
  • Red mechanical indicatoe:It can intuitively judge whether the relay is attracted.
  • LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized.
Check Stock

60L21 - Lennox OEM Replacement Furnace Blower Motor 1/3 HP 115 Volt

  • Part 60L21 replaced 79A52, 21W85, 89C3601, 57C2501, 45H6901, 100649-11, 100649-01, 79A5201, 60L2101.
  • Motor 5.5" Dia. 1/3HP 4 Speed 1075RPM, 115V.
Check Stock

WindyNation 25A DPDT Forward Reverse Up Down Reverse Polarity Switch for Hoist Winch Crane Motor Linear Actuator Momentary Switch

  • Momentary Switch: The DC load (e.g. motor) will only move when the up or down switch is being actively pressed with your finger. The moment the switch....
  • DPDT reverse polarity switch controls the up/down, clockwise/counterclockwise motion of DC loads (e.g. motors, hoists, cranes, linear actuators, etc.).
  • Enclosed housing for durability and prewired with 6 inches of flexible 14 AWG copper wire.
  • Heavy duty 25-amp, 250V switch to accommodate larger DC loads. 4.19" x 1.25", 3 ounces..
  • Simply connect your DC power supply & DC load to the extension cables and you are done!.
Check Stock