Top 3m Double Sided Adhesive

3M VHB Tape RP25 6 in Width x 5 yd Length (1 Roll)

  • Double-Sided Tape: VHB tape is an easy-to-use permanent bonding adhesive with gray acrylic foam. This tape bonds to a wide variety of surfaces, including metals, plastics, glass, painted or sealed wood, and concrete.
  • Strong Bond: the gray acrylic tape maintains a strong bond even in extreme environments. This 3M adhesive tape can be used on lighter, thinner, and dissimilar materials with equal efficiency.
  • Applications: ensure neatness with adhesive tape and mount decorative trims, handle moldings, plastic sign panels, etc. This tape can be used in place of drills, screws, spot welds, and liquid adhesive.
  • Performance: the double-sided tape is resistant to UV light, moisture, solvents, and chemicals to ensure perfectly sealed bonds. It also resists high-range, hot and cold temperature cycling.
  • Specifications: 0.25 in. thick, 6 in. wide and 15 ft. long double-sided tape roll bonds instantly to provide a smooth appearance.
Check Stock

Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm (3.15') VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders

  • 1.[ Designed for Suction Cup Mount] Volport 3M round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.It is also compatible with dash cam, GPS, car cell phone mount, iPad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring, rv, backup camera screen, hanging hooks, ect.You can also cut or trim the two sides sticky tabs to any smaller size you need..
  • 2.[ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120°C+，even on hot summer days in Texas,you can also use it safely, no more worries in cold weather, too..
  • 3.[ Very High Bond Stickiness ]: The adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3M double face strength sticky part big adhesive backing dot is also....
Check Stock

Fytz Design White Small Floating Shelf Set of 2 - Small Shelf for Wall with No Drill Shelf Option [ Adhesive Shelf ]

  • SMALL SHELVES FOR WALL - Easy to install small modern wall shelves to keep things within arm's reach or as a small display shelf.
  • STICK-ON INSTALLATION OPTION - Up to 3 LBS load per adhesive wall shelf using enclosed 3M VHB double-sided adhesive pads for an easy installation without wall damage.
  • ANCHOR INSTALLATION OPTION - Up to 10 LBS with a self levelling patented hook and FISCHER DuoPower anchors compatible with all wall types.
  • ALL INCLUDED - Two small wall shelves (8.0" W X 6.0" D), 3M double-sided shelf adhesive pads, hooks, level, anchors, screws and installation sheet.
  • MULTIPLE APPLICATIONS - Stick on shelf for wall ideal for mobile phone, speaker, alarm clock, bedside lamp, frame, planter, candles, eyeglasses, water bottle, mug, medicine, toothbrush, Etc..
Check Stock

3M 0.4' (10mm) X 16.4 Ft VHB Double Sided Foam Adhesive Tape 5925 Black Automotive Mounting,Very High Bond Strong, Industrial Grade

  • 3M VHB Double Sided Tape: 16.4ft length, 0.4inch width double sided tape is a Must-Have in Your Household. It can be used to replace rivets, screws, spot welds, and messy liquid adhesives. No more take time to drill or screw to decorate your home and office..
  • Waterproof 3M Double Sided Tape .Consists of a durable acrylic adhesive with viscoelastic properties, make the adhesive tape good for most surfaces, including installation outdoors or in the bathroom..
  • Easy To Use.This foam tape is easy to install and removal, and bonds to a wide variety of smooth and clean surfaces such as glass, metal, plastic, tile, wood, marble, and more! Not suggested for wallpaper, fabrics, textured walls, brick, and other rough and non-stick surfaces..
  • Durability: The black modified acrylic tape is resistant to UV light, moisture, solvents, and chemicals, ensuring perfect sealing and bonding even in extreme environments. It also resists high-range, hot and cold temperature cycling..
  • Multipurpose Mounting Tape.Double sided tape is designed for industrial strength bonding, attaching and mounting.The tape is widely used for home ,office ,LED lights,address plaques,automotive decor,for example ,photo frames,bathroom racks,mirrors,metal mailbox,Office signs, car registration plate....
Check Stock

MU-CN 12 PCS Replacement Adhesive Stickers for Pop Phone Stand Mount Double Sided Adhesive Pads Circle Sticky Compatible with POP Out Phone Collapsible Grip & Stand/Car Magnetic Phone Mount Holder etc

  • Cell Phone Holder Adhesive: 12 PACK VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24....
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Pop Out-Stand Mount Base Circle Double Sided Tape 2 Pack Rectangle VHB Sticker Pads for Dash Magnet Phone Mounts Sockets (Red)

  • ✅Strong 3M Sticky Adhesives: 10 PACK 1.38" more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • ✅Clean Your Phone:2 PACK 1.08"*1.88" Clean the chosen area where you'd like to place your phone with the stickers. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • ✅Cell Phone Holder Adhesive: 4 PACK 0.91" Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there's a flat and hard surface in the car dashboard.
  • ✅Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surf....
Check Stock

Sticky Adhesive for Dash Cam Suction Cup Mount, VOLPORT 90mm 3M Circle Heat Resistant Double Sided Extra Strong Mounting Tape Pad Replacement for Car Boat Dashboard Windshield Camera GPS Sucker Holder

  • 【Designed for Suction Cup items】Volport 90mm large size heat temperature resistant 3M sticky adhesives paper for dashboard windshield suction cup mount, make your sucker stronger. You can also adhere the grey adhesive foam tape to the dashboard pad mounting disk. Applicable to most suction cup dashboard stand and windshield long arm mount of dash cam, Action camera, rear view camera, backup camera, GPS navigator, mobile phone, sink sponge holder, basket. You can also cut it to the size you need..
  • 【Genuine 3M Sticky Adhesive Circles 】These 3M VHB very high bond strength double-side adhesive backing stickers for dash cam mount back have high temperature(120℃+) resistance performance, even in Texas, you can use it no worry in hot summer.Stickiness is 40% stronger than ordinary glue, make sucker with super strong suction force. The tape is waterproof, fit for DSLR sports action Cameras, sink caddy, iPad, widely install your DSLR on window, mirror, dashboard even exterior of auto or truck..
  • 【Easy to Install】The adhesion sticker replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive, clean the the surface with alcohol pack before using the new adhesive rounds, after surface is dried, p....
Check Stock

8 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, VOLPORT VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs Double Sided Tape for Collapsible Grip & Stand

  • Cell Phone Holder Adhesive: 8 PACK Small VHB 3m sticky adhesive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: 2 PACK more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad in....
Check Stock

3M VHB Foam Tape 4611, 1/4\ x 36 yards, Dark Gray, Double-Sided, Permanent, Long-Term Durability, High Temp Resistant

  • Applications: the acrylic adhesive allows instant bonding. This double-sided tape is used in applications like bonding of finishing trims and moldings in the automobile, heavy-duty vehicle, and equipment industries.
  • Temperature Resistant: the permanent bonding adhesive has a high temperature resistance. Being resistant to UV light, moisture, solvents, and harsh chemicals, the adhesive tape can bond and seal even in extreme environments.
  • Fast and easy-to-use: this two-sided tape guarantees a smooth surface appearance and creates a high strength bond between substrates without the need of rivets, spot welds, screws, and liquid adhesives.
  • Compatibility: this firm foam tape perfectly bonds to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The acrylic tape offers design flexibility due to its viscoelastic properties.
  • 3M Preferred Converter: TapeCase is a 3M Preferred Converter.
  • 3M has partnered with TapeCase to make their products available in a larger assortment of sizes, so that customers can use the tape in a variety of applications..
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

  • For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back..
  • Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
  • NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous....
Check Stock

Socket Sticky 3M Adhesive Replacement Pads 8 Pack, for Phone Mount Base, Double Sided Adhesive Pads for Collapsible Grip, Dashboard, Wall, Flat Magnetic Holders |3M VHB Replacement Parts by True Decor

  • Socket Sticky Adhesive Replacement – car phone mount holders, and other dashboard mounting systems, this True Decor base adhesives restore grip strength and balance..
  • Strong, Double-Sided Adhesive – These 3M socket adhesives use high-quality tape backings to secure your phone mount or collapsible grip stand with stronger low and high-temperature resilience for year-round use..
  • Round, Precision Fit Design – We offer two different sizes in every stick adhesive replacement pack, including 1.4” and 0.9” circular pads, to ensure they suit your specific grip, mount, or device need..
  • Multi-Surface Application – Designed to adhere to a wide range of surfaces, our 3M double-sided tape is strong enough to stick to walls, car dashboards, windows, mirrors, nightstands, lockers, and more..
  • Universal Grip and Mount Compatibility – True Decor sticky adhesive tape can be used on bunch of different devices, such as a dash cam mount holder, 360 magnetic car mount, GPS navigation mounts, or collapsible phone sockets..
Check Stock

3M 4611/GRY136 Scotch 4611 VHB Tape: 1" x 36 yd, Dark Gray

  • 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
Check Stock