Top 3m Strong Adhesive Pads

[14 Pack]- Pop 3M Socket Sticky Adhesive Replacement with 2pcs Alcohol Pads, 3M VHB Double Sided Tape for Grip Holder and Magnetic Phone car Mount

  • [14 Pack Double-sided sticky pads for Pop Socket & Mount, Phone grip,etc ] Included 1.35 inch and 0.9 inch Double-sided sticky pads, which is proved to be the perfect size for pop socket, phone grip,finger ring holder, VAVA magnetic phone car mount. Also works for dash cam mount..
  • [Stick well on different material, even fabric] it can stick to anywhere there is a flat, hard and dry surface, like a Otterbox case, a lifeproof case, a case made of fabric, faux leather, PC, tempered glass, silicon or rubber, fiberglass, glass windshield,car dashboard, locker, mirror, refrigerator, bed post, wall and ect..
  • [Extra Strong & Durability, Hold 53oz For 11 Years] 3M VHB is made of polyacrylate, whose main chain is C-C bond.After testing, that makes it can hold anything with 53oz for 11 years, between 70°F and 100°F..
  • [Easily install] With 2pcs alcohol pads, remove the old adhesive without difficulty and residue. And with the special design of the adhesive paper, it is easy to peel off both sides..
  • [Strong But Thin] Only 1mm thickness makes it nearly invisible. With black strong 3M VHB, the tape is very sticky and lasts very long..
Check Stock

8 Pack Sticky Adhesive Replacement for Socket Stand VOLPORT 1.4 Inch Pops 3M Circle Heat Resistant Double Sided Clear White High Bond Tape Extra Strong Removable Sticker Pad for Phone Grip Holder

  • COLLAPSIBLE GRIP BASE ADHESIVE: 8 pack 1.4 inch 3M swappable adhesive pads is exclusively designed for car cell phone glass and backing of collapsible....
  • GENUINE STRONG 3M STICKY PAD: Super sticky small spare disk compatible with collapsible iphone grip socket. With best single cheap cell phone holder....
  • ALCOHOL PAD INCLUDED: 4 alcohol pads are included in the package. Clean the chosen area where you decide to place the grip with these alcohol pads.....
  • EASY TO INSTALL: You need to remove the old adhesive first, then clean the surface for both collapsible grip and back of your cell phone with alcohol....
  • PACKAGE INCLUDES: 8 x 1.38'' heavy duty sticky pad, 4 x alcohol pad, 1 x user manual. We provide a one-year warranty and if you need any help with our....
Check Stock

Beats Solo 2 & 3 Earpad Replacement，Memory Foam Ear Cushion Cover for Beats Solo 2/3 Wireless On Ear Headphones ONLY Pop Purple

  • Note: Due to the Cold Weather,You Need to use a Hair Dryer to Heat the Adhesive When Attaching this Ear Pads, so that the Adhesive can Better Bond....
  • Compatible: These Replacement Ear Pads are Compatible for Solo 2 / 3 Wireless on Ear Headphones by Dr. Dre ONLY. ( DOES NOT FIT SOLO 2.0 WIRED ).
  • Enhanced Sound: Memory Foam Provide Perfectly Ear-Conforming fit, to Enhance Noise Blocking While Enhancing Every that Comes Through Your Headphones..
  • Longer Use: 3M VHB Strong Adhesive on the Back of the Ear Pads will Make Sure Your Ear Pads will Never Fall Off..
  • RISK FREE: We will Back All of Our Customers Even After the 90 Days of Warranty. We're Always Willing to Listen to Your Concerns! So Please do Not....
Check Stock

Syncwire [Wireless Charger Friendly] Cell Phone Ring Holder Ceramic Stand Support Wireless Charging 360° Rotation Phone Ring Holder Sturdy and Sleek Loop Finger Ring Kickstand Suitable for All Phones

  • Support Wireless Charging: The new Syncwire ceramic phone ring holder can support wireless charging. The thin and light design does not affect the use....
  • Strong Adhesiveness: With an ultra-strong 3M VHB adhesive pad, this phone finger stand can attach to your smartphone tightly (withstands 5kg gravity....
  • 360°Rotatable & 180°adjustable: Syncwire phone holder is 360° rotatable and 180° foldable so that you can position your phone at your best viewing....
  • High Quality and Well-Constructed: Made of high-quality PC (sticker part) and ceramic (ring grip part and surface), Syncwire phone ring holder boasts....
  • What You Get：1x Phone Ring Holder (with 3M VHB pads), 1x Alcohol Cloth, 2x 3M VHB Pads, 1X User Manual, a 36-month warranty, and fast and friendly....
Check Stock

Ailengy Double Sided Tape, 3M Strong Sticky Adhesive Foam Pads, 27 x 27 x 2mm Mounting Squares for Crafts Photo Album Walls, Hooks, Small Mirrors, Bookcases -100Pcs

  • 【MATERIAL】: 3M double-sided foam squares are made of EVA foam, have good durability, temperature withstanding, strong adhesive, waterproof..
  • 【Dimensions】: Sticky adhesive foam pads side were 1.06" x 1.06"/ 27 mm x 27 mm.
  • 【Easy Install】: Square shape, self-sticky double-sided tape, it can be cut to cater to your different needs. Remove the backing paper, then hold the installation position and press firmly..
  • 【Strong and durable】: Our double-sided pads are made of high-quality EVA foam, stick very well, and are very durable. Easy to use: use these adhesive foam pads simply by peeling off the protective film on both sides..
  • 【Application】: These foam tapes are suited for paper, wood, metal, glass, and plastic. Usually used for housings, panels, LCD, and LED. .
Check Stock

Socket Sticky 3M Adhesive Replacement Pads 8 Pack, for Phone Mount Base, Double Sided Adhesive Pads for Collapsible Grip, Dashboard, Wall, Flat Magnetic Holders |3M VHB Replacement Parts by True Decor

  • Socket Sticky Adhesive Replacement – car phone mount holders, and other dashboard mounting systems, this True Decor base adhesives restore grip strength and balance..
  • Strong, Double-Sided Adhesive – These 3M socket adhesives use high-quality tape backings to secure your phone mount or collapsible grip stand with stronger low and high-temperature resilience for year-round use..
  • Round, Precision Fit Design – We offer two different sizes in every stick adhesive replacement pack, including 1.4” and 0.9” circular pads, to ensure they suit your specific grip, mount, or device need..
  • Multi-Surface Application – Designed to adhere to a wide range of surfaces, our 3M double-sided tape is strong enough to stick to walls, car dashboards, windows, mirrors, nightstands, lockers, and more..
  • Universal Grip and Mount Compatibility – True Decor sticky adhesive tape can be used on bunch of different devices, such as a dash cam mount holder, 360 magnetic car mount, GPS navigation mounts, or collapsible phone sockets..
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

8pcs 3M Sticky Adhesive Replacement Pads for Socket Base Mount,VIIMAKE 1.38 inches Round 3M VHB Double-Sided Adhesive Pads,for Phone Collapsible Grip Stand Back Base Sticker Tapes Red

  • 【Easy to Tear off】:We have upgraded the quality of 3M VHB black gel, the red film is easy to tear, unlike the red base film on the market, it is....
  • 【Used for Socket Base】:Offers 8 Pcs adhesive pads(Diameter: 1.38 inches).This round double sided adhesive replacement parts designed for socket....
  • 【Instructions for use】: ①Clean the area to be attached and keep it dry②When the tape is glued, apply the appropriate pressure evenly, please....
  • 【Application Technology】:Replacement adhesive pads, with strong viscosity, good UV resistance, solvent resistance, softness and good....
  • 【Important Note】:To achieve the bonding effect, the bonding surface must be clean and dry.Come with 4 pack alcohol pads help you clean the area....
Check Stock

Sticky Adhesive for Dash Cam Suction Cup Mount, VOLPORT 90mm 3M Circle Heat Resistant Double Sided Extra Strong Mounting Tape Pad Replacement for Car Boat Dashboard Windshield Camera GPS Sucker Holder

  • 【Designed for Suction Cup items】Volport 90mm large size heat temperature resistant 3M sticky adhesives paper for dashboard windshield suction cup mount, make your sucker stronger. You can also adhere the grey adhesive foam tape to the dashboard pad mounting disk. Applicable to most suction cup dashboard stand and windshield long arm mount of dash cam, Action camera, rear view camera, backup camera, GPS navigator, mobile phone, sink sponge holder, basket. You can also cut it to the size you need..
  • 【Genuine 3M Sticky Adhesive Circles 】These 3M VHB very high bond strength double-side adhesive backing stickers for dash cam mount back have high temperature(120℃+) resistance performance, even in Texas, you can use it no worry in hot summer.Stickiness is 40% stronger than ordinary glue, make sucker with super strong suction force. The tape is waterproof, fit for DSLR sports action Cameras, sink caddy, iPad, widely install your DSLR on window, mirror, dashboard even exterior of auto or truck..
  • 【Easy to Install】The adhesion sticker replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive, clean the the surface with alcohol pack before using the new adhesive rounds, after surface is dried, p....
Check Stock

Solo 2/3 Wireless Earpads - JECOBB Replacement Ear Cushion Pads with Protein Leather and Memory Foam for Beats Solo 2.0/3.0 Wireless On Ear Headphones ONLY (Black)

  • EASY INSTALLATION: Follow the instructions, it’s easy to remove your old beats solo 2 / 3 wireless ear pads and install the new beats replacement ear pads. And one of the ear pads has a notch for the beat solo wireless headphone's charger..
  • STRONG ADHESIVE: 3M VHB adhesive on the back of the ear cushions will make sure your ear cushions will never fall off..
  • PROTEIN LEATHER: Made of durable and professional-grade protein leather for long-term use, the replacement ear pads have a smooth surface and comfortable touch..
  • MEMORY FOAM: Made of firmer memory foam for blocking the noise, you will enjoy your beats solo2 or solo3 wireless on ear headphones by Dr. Dre..
  • GUARANTEE: Each ear pad is thoroughly inspected for defects. 100% money back if not fit or defective!.
Check Stock

Solo 2/3 Wireless Earpads - JECOBB Replacement Ear Cushion Pads with Protein Leather and Memory Foam for Beats Solo 2.0/3.0 Wireless On Ear Headphones ONLY (White)

  • EASY INSTALLATION: Follow the instructions, it’s easy to remove your old beats solo 2 / 3 wireless ear pads and install the new beats replacement ear pads. And one of the ear pads has a notch for the beat solo wireless headphone's charger..
  • STRONG ADHESIVE: 3M VHB adhesive on the back of the ear cushions will make sure your ear cushions will never fall off..
  • PROTEIN LEATHER: Made of durable and professional-grade protein leather for long-term use, the replacement ear pads have a smooth surface and comfortable touch..
  • MEMORY FOAM: Made of firmer memory foam for blocking the noise, you will enjoy your beats solo2 or solo3 wireless on ear headphones by Dr. Dre..
  • GUARANTEE: Each ear pad is thoroughly inspected for defects. 100% money back if not fit or defective!.
Check Stock

Abahub 3 Piece EVA Surfboard Deck Traction Pads with Kicker for Stomp Skimboards, Surf Boards, Funboard, Fish Board, Black

  • Soft and Superb Grip: The ultralight diamond grooved EVA foam is soft and comfortable to stand on. Also maintains textured traction for your feet, strong enough to provide the support needed for all the movements in surfing..
  • Super Sticky 3M Adhesive: Authentic green label 3M high-grade adhesive ensures that the traction pad is stick firmly, this surfboard traction pad is designed for turns and cutbacks..
  • Compatible with All Types of Boards: You can put the traction pad on your board any way you like, spread them out for wider boards or put them together for narrower ones. The 3-piece traction pads could fit for all surfboards, fishboards, skimboards, funboards and longboards..
  • Beveled Tail Kick & Center Arch: The 25mm beveled tail kick provides the place for keeping your foot locked, increases your surfboard’s maneuverability and makes it easier to make turns. The traction pads have a 10mm center arch, which helps guide your foot for better control in surfing..
  • Why Shop ABAHUB: This traction pad is built with top level quality materials at an affordable price. We’ve been making surfing accessories for over 10 years, and we stand by the quality of our products, so we are glad to offer a 1-year manufacturer’s warranty at no additional cost..
Check Stock