Top 3pcs Welded Ball Valve

Acouto for SBC Push Rods, 16pcs Hardened Steel Pushrods Set 5/16in Diameter 7.8in Standard Length Fit for Chevy OEM Replacement Pushrod Set

  • Fitment---- Valve Push Rods are suitable for '55-'94 262, 283, 302, 305, 307, 327, 350 and 400 non roller cam engines. 100% brand new, please be assured of your purchase.
  • Size---- 5/16in diameter with welded (not pressed) ball ends, 7.800in standrad length. Please confirm whether the product is suitable before purchasing.
  • High Quality Steel---- The push rods are made of high-quality steel material, which are wear-resistant and durable, not easy to break. The manufacture of the push rod meets the strict quality requirements.
  • High Strength---- Heat treated for added strength, guideplate compatible. Durable one-piece construction, which has long service life, high precision and good reliability.
  • Good Replacement---- Mate perfectly with high energyand magnum rockers. Ideal and direct replacement for old or damaged valve push rod, dependable to use.
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

CURT 45154 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-In Receiver, 7,500 lbs, 4-Inch Drop

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 4-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45134 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin, Fits 2-In Receiver, 7,500 lbs, 2\ Drop , black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

CURT 45155 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-In Receiver 7,500 lbs 2 Rise black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45650 Multi-Ball Trailer Hitch Ball Mount, 1-7/8, 2, 2-5/16-Inch Balls, Fits 2-Inch Receiver, 10,000 lbs

  • HIGHLY VERSATILE. This trailer hitch ball mount features 3 welded trailer balls on a single shank to accommodate a wide variety trailers. It's perfect for multiple trailer owners! Simply turn the ball mount to the ball size needed.
  • DEPENDABLE STRENGTH. The 1-7/8-inch ball is rated for 5,000 lbs. GTW / 500 lbs. TW, the 2-inch ball 7,500 lbs. GTW / 750 lbs. TW, and the 2-5/16-inch ball 10,000 lbs. GTW / 1,000 lbs. TW (limited to lowest-rated towing component).
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with welded tow balls for ready coupling to your trailer. Because the welded hitch balls are permanently attached, they can never be loosened.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish. This helps resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. This multi-ball mount has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. To install it on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver.
Check Stock

CURT 45152 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Rise

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45131 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

Red Headed Rebel RHR Ghost Hitch Ball Mount Attachment

  • Ball mount attachments for Red Headed Rebel RHR Ghost cushion hitches..
  • 15 Styles - Drop, dual call, raised, pintle, drawbar, clevis pin along with sway bar tab attachments and more.
  • Drop, standard & raised mounts come with 2" or 2-5/16" bolt on ball. Dual combo ball has a 2" and 2-5/16" balls and is a welded combo ball mount with clear zinc plated finish. The rest are black powder coat finish. The raised, drop and regular ball mounts has a bolted on hitch ball..
  • Dual combo ball has a 2" and 2-5/16" balls and is a welded combo ball mount with clear zinc plated finish. The rest are black powder coat finish. The raised, drop and regular ball mounts has a bolted on hitch ball..
  • Bolt on ball capacities: 20,000 lbs tow & 2,000 lbs tongue weight with 2-5/16" ball & 10,000 lbs / 1,000 lbs with 2" ball.  Draw bar mounts have 1" holes & are NOT for use with hitch ball).
Check Stock