Top 4 3 tft Touch Screen

DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only

  • ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
  • ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
  • You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
  • ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check Stock

Replacement Nintendo DS Stylus In Black pack of 2 by Mars Devices

  • Compatible With: For Nintendo DS Lite Or Resistive TFT Touch Screen. For Arudino TFT Screen..
  • Keep your screen free from scratches and fingerprints..
  • Easily snaps inside a convenient storage slot on the back..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen 32-Bit Silent Motherboard Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3 Pro/5 3D Printer

  • ⭐【BIGTREETECH Combo Set】Comes with Bigtreetech SKR Mini E3 V3.0 control board and TFT35 E3 V3.0.1 touchscreen with dual modes as a set. Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances..
  • ⭐【Upgraded More Capabilities】Intergrated with TMC2209 mute stepper driver, BIGTREETECH SKR Mini E3 V3.0 control board offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on..
  • ⭐【Impressive Heat Dissipation】The SKR MINI E3 V3.0 also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 motherboards..
  • ⭐【Supports Touch/Graphic Display】TFT35 E3 V3.0.1 touch screen enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It’s a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board..
  • ⭐【Satisfying After-Sales Support】If you have ....
Check Stock

Naxa Electronics NAXA NT-90 9 Portable TV & Digital Multimedia Player

  • Enjoy TV broadcasts (ATSC/NTSC tuner) Additional external antenna for enhanced Play multimedia files from USB and SD memory cards TV reception.
  • Digital multimedia support: JPG, MP3, MPEG2, MPEG2_HD, MPEG4, MPEG4_SD, MPEG4_HD, H.264, FLV.
  • 3-way power: AC power adapter, DC car adapter, and rechargeable battery Two A/V input connectors and external antenna.
  • Headphone jack (3.5 mm) and built-in stereo speakers Screen Type: 9" TFT LCD (800 x 480) Removable Memory Support: USB, SD.
Check Stock

Waveshare 7inch Capacitive Touch Display Compatible with Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/CM3/3+/4 800×480 Resolution DSI Interface

  • Provide online user manual, please check the manual carefully before using!.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4* (CM3/3+/4 requires extra adapter board).
  • 7inch TFT screen with a hardware resolution of 800x480. Capacitive touch panel supports 5-point touch..
  • As it directly drives LCD by the DSI interface of Raspberry Pi, the refreshing rate is up to 60Hz..
  • Supports Raspberry Pi OS / Ubuntu / Kali and Retropie. Support backlight adjusts by software..
Check Stock

5 inch Touchscreen Monitor for Raspberry Pi DSI LCD Screen 800×480 Display for Raspberry Pi 4B 3B+ 3A+ 3B 2B B+ A+ CM3/3+ Compatible with Raspbian Ubuntu Kali WIN10 IoT RetroPie

  • 5 inch capacitive touch display for Raspberry Pi, 800×480 resolution,TFT wide angle, toughened glass touch panel.
  • 5 inch TFT screen capacitive touch control, support up to 5-points touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, another adapter board is required for CM3/3+, supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver-free.
  • Mipi DSI interface, refresh rate up to 60Hz.
Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

  • ✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
  • ✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
  • ✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
  • ✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
  • ✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
Check Stock

Smeg CMSU4104S Linea Aesthetic Fully Automatic Built-In Coffee System, 24-Inches

  • DESIGN: “Mystic-gray” glass finish, Full-color TFT touch screen display, 4 LED lights.
  • FEATURES: Adjustable coffee size (5 levels) and temperature (3 levels), Frothing nozzle for cappuccino Multi-language display,.
  • DIMENSIONS(HxWxD): 17 13/16 x 23 1/2 x 18 1/4-Inches.
  • ELECTRICAL SPECIFICATIONS: Tension/frequency: 120 V.
  • ADDITIONAL INFORMATION: Water tank capacity: 81 oz, Coffee bean container capacity: 0.77 lbs.
Check Stock

Nextion Display 3.5 NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 + Acrylic Case Enclosure Transparent for Arduino Raspberry Pi

  • NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

Nextion Display 3.2 inch NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 + Transparent Acrylic Case Enclosure for Arduino Raspberry Pi

  • NX4024T032 is nextion 3.2 basic screen: 3.2 inch TFT, 400x240 resistive touch display, 4M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.2 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock