Top 4 Inch Cutting Disc

9Pcs Angle Grinder Carving Disc Kit Including 3 Wood Shaping Grinding Disc, Speedcutter, Wood Carving Chain Disc and 4 Sanding Wheels for 4' or 4 1/2' Angle Grinder for Woodworking Cutting and Shaping

  • ...ding Disc】3 Different grinding plates(Flat, Inclined, Curved), and 3 pieces of silver bushing(7/8" to 5/8"). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor..
  • 【Speedcutter & Carving Chain Disc】Speedcutter is made of hard alloy, suitable for polishing, grinding and cutting non-metal materials & all kinds of wood. Wood carving chain disc is made of stainless steel, solid and durable for use, 13 teeth fine cutting chain disc, circular baw blades provides a smooth finished surface, fits for 4-1/2" angle grinders..
  • 【Zirconium Corundum Flap Disc Wheels】Constructed of premium blue zirconium corundum for excellent strength, durability, and extended service life. 60 grit grinding wheels are good & effective alternative for smoothing, sanding, blending, polishing, finishing flat surfaces, deburring contours..
  • 【Application】With rapid cutting and grinding speed, the grinder carving disc kit is great for many materials, suitable for any wood, cutting everything from hardwood, plastic and other soft materials, without worrying about hard places such as wood bumps. Ideal for grinding, carving, and removing small tree stumps. Good wears resistance, can serve you for a long time..
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

SKILFUL Cut Off Wheels 50 Packs, 4 1/2 inch Ultra Thin Cutting Wheels Anti-vibration Angle Grinder Cutting Discs for Metal and Stainless Steel Cutting

  • Double Cutting Efficiency---The SKILFUL 115mm angle grinder disc adopts a unique ratio of alumina and silica, acting on a solid stainless steel plate with a thickness of 20mm, which can cut 18 pieces, while other cutting wheels can only cut 10-15 During the cutting process, burrs and clogging will not occur even when it is aluminum, thereby finding a balance between sharpness and wear resistance, thereby reducing rework rate and simplifying work.
  • Double-Layer Glass Fiber Has a Longer Service Life---We use BASF's adhesive (resin) and double-layer glass fiber mesh to make it perfectly integrated, which produces self-sharpening and adds a layer of fiber cloth to the bottom of the grinding machine cutting wheel. Reduce the resin moisture and increase the density of the cutting disc, thereby prolonging the service life and facilitating storage.
  • FITS ANY ANGLE GRINDER---Stainless steel cutting discs is 4 1/2 x0.04x7/8 inch total in 10 PCS with ultra thin metal & stainless steel fast burr free cutting.Compatible with die grinder, electric cut off tools,accessories for DEWALT,Makita ,Bosch,Ryobi and so on.
  • MULTIPLE UESES---The angle grinder disc are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive c....
Check Stock

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blade....
Check Stock

Walfront 2.5-Inch 8-Teeth Chain Disc Angle Grinder Accessories Carving Disc Woodworking Tool Suitable for 4 inch (100mm) / 4-1/2inch (115mm) Angle Grinder

  • ✅【CHAIN BLADE FIXED FIRMLY】-- The chain blade is fixed between two steel plates and can be carved firmly, durable for long time use.
  • ✅【BLADE CAN EASILY CUT】-- Whether it is texture or knotting, the blade can easily cut the material, convenient to operate and use.
  • ✅【SUITABLE CARVING DISC】-- Wide range of application, the wood carving disc is suitable for 4inch (100mm) or 4-1/2inch (115 mm) angle grinder.
  • ✅【8-TOOTH CHAIN DISC】-- 8-tooth chain disc provides smoothly and polished surface, which is useful for reducing subsequent grinding.
  • ✅【SUITABLE APPLICATION】-- The chain disc uses its speed and mobility to complete the cutting, carving, removing and engraving of wood, plastic, ice and hard rubber.
Check Stock

COMOWARE 4 1/2\ Cut Off Wheel 25 Pack, Cut Off Wheels 4 1/2 x 7/8 Inch Ultra Thin, Metal and Stainless Steel Cutting Wheel for Angle Grinder, General Purpose Metal Cutting Disc for Angle Grinder

  • 【SHARP & CLEAN CUTTING】 This 25-pack 4-1/2 x 7/8-inch cut off wheel set is specially formulated for fast cutting in metals and stainless steel. The extremely thin .045-inch wheel design helps for clean, straight cuts with minimal burr..
  • 【PREMIUIM MATERIAL】 These 4-1/2" cut off wheels are specifically manufactured from corundum, aluminum oxide grain that provides high hardness, durability and abrasion resistance. The internal double fiberglass reinforcement provides ultimate safety and longer service life in these ultra-thin cutting wheels..
  • 【GENERAL PURPOSE METAL CUTTING】 Proprietary aluminum oxide grain combination helps these angle grinder cutting wheels deliver aggressive cutting action on carbon steel, sheet metal, rebar steel, stainless steel and other ferrous metals (not for masonry or concrete)..
  • 【SAFETY & STABILITY】 Reinforced by 2 full sheets of fiberglass and zinc-iron alloy rings for extra durability, this very hard cutting disc delivers stable performance with less wheel shatter..
  • 【GREAT PERFORMANCE】 These 4.5" cut off wheels for metal are compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. Up to 13,300 RPM (003ecommon 13,000 RPM) rotating speed for maximum productivity..
Check Stock

LotFancy 14PCS 4-1/2 Flap Discs and Cutting Wheels Set - 40 60 80 120 Grit Assorted Zirconia Alumina Sanding Grinding Wheels Type #27 Metal Cut Off Wheels for Angle Grinders

  • This sanding wheels pack includes 8 flap discs of multiple grit: 40 60 80 120 grit and 6 cutting discs, satisfying your requirements from all your cutting, blending, sanding and finishing requirements.
  • Each Disc is bonded with fiberglass backing to absorb tool vibration and offer additional durability and reinforcement.
  • Zirconia Alumina abrasives feature a superior cut rate and service life to aluminum oxide abrasives.
  • They are durable, aggressive cut, good abrasion resistance, anti-static and anti-clogging.
  • Wide Application: Flap Disc is widely used for rust, paint, ferrous metals, stainless steel, non-ferrous metals, wood and plastics.
  • Thin Cutting Wheel is designed for fast burr free cutting, quickly and effortlessly cutting through All Metal, Steel and Stainless Steel.
  • 4-1/2" Diameter with 7/8" Arbor, 13300RPM maximum speed, fits most 4.5 Inch Angle Grinder, such as DEWALT DCG414B, DWE402, Makita 9557PBX1, Bosch 1375A, GWS8-45, PORTER-CABLE PC60TAG, PCE810, Black & Decker BDEG400, G950 and more.
Check Stock

PRVEW 50-Pack Die Grinder Cut Off Wheel 3 Inch, 3"x1/16"x3/8"Quality Cutting Wheel Cutting Disc for Metal&Stainless Steel

  • [Size Specification] - The PRVEW cut off wheel 3 x 3/8 Inch is perfectly compatible for all 3" portable die grinders and angle grinders with 3/8" arbor.
  • Thickness:1/16 inch(1.6mm), Operating up to 20300 RPM 80M/S..
  • [Reliable&Safe Discs] PRVEW metal cutting disc is reinforced by double fiberglass meash,complying with international standards and safety requirements such as EN 12413,.
  • [Long Lasting Discs] PRVEW metal cutting disc is made of premium aluminum oxide grain, for which provides aggressive cutting action and durable long service life.
  • [Great Performance] The thin design of 1/16 inch thickness cutting off wheels provides fast, precise, and clean cutting performance with minimal burrs and material waste..
  • [Multi-Applications] PRVEW 3-inch cutting discs compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool. and are very suitable for super-fast, clean cutting in carbon steel, stainless steel, iron, copper, and other ferrous metals..
Check Stock

WORKPRO Rotary Tool Accessories Kit, 295-piece in Compact Case, 1/8-inch Diameter Shanks, with 4pc Collet, Universal for Major Brands

  • 【UNIVERSAL SHANKS AND COLLET】- With 1/8-inch diameter shanks and 4 pieces collets in different sizes (1.6mm, 2.4mm, 3.2mm*2), this kit is universal fitment for all major brands, such as dremmel, wen, bosh and etc..
  • 【COMPACT STORAGE CASE】- Strong plastic case for organizing variety of bits orderly, which makes the rotary bits kit portable and hangable, an additional small storage box makes it convenient to only carry necessary parts in the work.
  • 【WIDELY USE】- Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass, ceramics and porcelain. Sanding drums and sanding disc for rough shaping and smoothing wood and fiberglass.
  • 【295-PIECE ROTARY ACCESSORY SET】- This kit includes 295 pieces rotary accessories: polishing wax, drill bit, resin cutting disc, wool felt, felt polishing tip, resin cutting disc connecting rod, grinding needle, etc..
  • 【GREAT FOR DIY AND AS GIFTS】- Ideal for sanding, carving, deburring, cutting, drilling, grinding, polishing, engraving, as well as many other verbs in DIY, and also perfect present for Christmas, Birthday, Thanksgiving Day, Fathers' Day and etc..
Check Stock

MASTEC 4 1/2 Inch Tungsten Carbide Cut off Wheel for Angle Grinders, Cutting Carving Disc for Wood Laminate Plastic with 7/8 Inch Arbor

  • 【Specification】:Outer diameter 115mm(4.5 inch)with the arbor of 22.23mm(7/8 inch) carbide cut off wheel.
  • 【Tungsten Carbide Grit】:Protrude beyond the plane of the cutting wheel body enables it to groove in the wood..
  • 【Application】:Designed to cut and carve wood laminate plastic,etc..
  • 【Smooth and clean cut】:This angle grinder cutting dics has a special design in which the disc body has feed stop. This prevents the disc from being submerged into the material uncontrolled, which in turn prevents the kickback..
  • 【Good Service】：Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement free of charge..
Check Stock

EZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder, 4.5" Stone Blade for Fast Cutting Porcelain Ceramic Granite Marble Brick(2-Pack)

  • 【Stone Cutting Master】EZARC Diamond Blade offers excellent performance and efficiency when it comes to cutting through masonry materials such as ceramic, granite, marble, concrete and brick..
  • 【Turbo Segments】The turbo design reduces debris and provides a smoother, cleaner cut, resulting in a more professional surface finish. By minimizing vibrations during the cutting process, it enhances user comfort and control, making the overall experience more enjoyable and precise..
  • 【Diamond Grit】The strategic positioning of turbo segments in our diamond blade ensures optimal cooling, preventing overheating and extending its lifespan. With premium HRC90+ diamond grit and a special dimensional arrangement, this versatile diamond masonry blade offers maximum cutting life for heavy-duty demands..
  • 【Compatibility】EZARC 4-1/2 inch diamond cutting wheel is suitable for most tile saws, hand-held angle grinders and wet saws with a 7/8" Arbor (includes a adaptor for 5/8" arbor). Disc Size: 4.5 Inch.
Check Stock

Wood Carving Chainsaw Carving T-Shirt Gift for Wood Carver

  • ...buy MORE CIRCLETS check in the variations section (to the right or below the product images)..
  • ✅ STORAGE BOX – Our chainsaw blade comes in a cool carton box with great design for storing the disc when not in use. Keeping the chainsaw teeth blade unpacked, for example, in a drawer with other things, can cause the cutting edges of the chain teeth to blunt. Use the box for storage and protect your blade..
  • ✅ TOOTH INDICATOR – To help you install the chain correctly, we added a laser-printed tooth icon on the top disc plate. If the orientation of the chain teeth and the orientation of the tooth indicator on the disc coincides, this fact indicates that the chain is installed correctly..
Check Stock