Top 4 Stroke Oil Engine
186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery
- 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
- 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct injection Bore*stroke(mm):86x70mm Displacement capacity(cc): 406cc.
- 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
- 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
- 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check StockSuperior Engine System Outboard Motor 4-strok Inflatable Fishing Boat
- Engine has been certified by CE /EPA. Outboard engine with reverse gear.
- Suitable in freshwater or saltwater . Perfect math inflatable kayaks,fishing boats,sailboats and canoes..
- Durable----Compact structure,lightweight and easy to carry,anti-corrosive construction,forward and neutral design..
- Fuel efficient----Latest fuel saving technology and advanced combustion chamber with four stroke outboard engines,gasoline burn completely,can make every drop of gasoline into power.The 4 stroke saves 30% fuel than 2 stroke..
- Environmental protection----Clean and pure gasoline fuel makes emissions targets the outboard engine has been able to meet the European and American CE certification,which contributed to the promotion of green sports.In addition,it will not be like two stroke outboard engine is the same keep without burning oil into the water..
Check StockPontoon [Explicit]
- 【High Performance】Max.speed(r/min): 4500-5500,Displacement: 169CC,Gear ratio: 2.08(27:13),Control System: Tiller control,Starting System: Manual start,Control System: #93 gasoline.Recommended Propeller range: 3 -9"1/4''x8",Recommended Lubricant: 2 Stroke Lubricating oil,Mixing ratio: Fuel:oil=50:1,Trim and tilt system: Manual Tilt,Standard fuel tank capacity: 24L.
- 【12HP 2 Stroke Outboard Boat Motor】Using 2 Stroke Power, 12HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
- 【Durable】Superior outboard anti corrosion system and anodes for increased durability. Durable cast aluminum construction for superior corrosion protection, suitable for both freshwater and saltwater..
- 【Water Cooling System】Superior engine water cooling system for improved engine performance. Easy pull off engine cover with push button latch for instant m....
Check StockMinn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft
- ♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
- Recommended Lubricant: 2 Stroke Lubricating oil.
- ♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
- Recommended Propeller range: 3 -9"1/4''x8".
- ♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..
Check StockDiesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine
- 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
- 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct injection Bore*stroke(mm):86x70mm Displacement capacity(cc): 406cc.
- 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
- 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
- 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check StockBILT HARD Gas Engine 79cc, Gas Motor for Go Kart, Mini Bike, Log Splitter, EPA & CARB Certified, 4 Stroke OHV Horizontal Shaft with Recoil Start
- Wide Application: HILT HARD 4-stroke engine is an easy-to-install solution for small engine needs. Great for residential or commercial lawn and garden equipment applications, weed eaters, tillers, cultivators, back pack blowers, trimmers, agricultural equipment, construction/industrial equipment, and a great array of applications to include..
- Super Durable: This tough gas engine features a durable cast iron cylinder that withstands wear and abuse, fuel shut off for safe transport and gas saving overhead valves for a cooler, cleaner performance.(engine oil is not include).
- Excellent Performance: 4-stroke engine delivers powerful, quiet, cleaner performance with low vibration which reduces work fatigue, making it ideal for small equipment applications and as a replacement for the standard 2-stroke high emission engines used in these applications..
- Industrial Grade Made: All BILT HARD engines are industrial grade and feature cast-iron sleeves, automotive grade rods, pistons, rings, crankshafts, valve and valve springs. 3,600 RPM engine speed, splash-lubrication system provides efficiency. Easy-reach recoil starter system with auto-decompression..
- Noted: Every item will be Oil Tested before packaging, so it may look used or touch a little oily, but 100% new ....
Check StockMOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Black)
- MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
- Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check StockCYJZWOH Outboard Motor - New 2 Stroke 4 HP Boat Engine 63CC Boat Engine with Air Cooling System
- Standard CDI ignition system for easy starting and improved performanceSuperior engine air cooling system for improved engine performance, to improve the reliability of the whole machine.
- Durable cast aluminum construction for superior corrosion protection, Economical and compact structure.
- Features 360 degree steering rotation for reverse without gear shifting. Twist grip throttle handle and engine stop button for improving response and saving time..
- Wide use: It can be used for different small boats with different kinds of material from 2 to 4 meters length,such as air boats,wooden boats,glass boats,rubber boats,yachts, inflatable boats,sailboatsand other mini boats..
- Note:For this 2 stroke outboard motor, you need to use gasoline and oil mixed fuel, the gasoline and oil mixing ratio is 25:1. Please use 93# gasoline and 2 stroke engine oil..
Check StockMotorized Bicycle Kit 49CC 4-Stroke Gas Petrol Bike Engine Air-Cooled System Single Cylinder Belt Drive Scooter Engine Conversion Kit for Normal 28” V Frame Bike and 26” ATV Bike (Belt type)
- ☀☀☀☀☀【NOTE】This is belt type..
- ☀【4 Stroke Engine Motor】This engine is a 4-stroke motor engine kits, includes everything a motor needs at a economic price. This 4-stroke motor is more stable, more reliable and quieter than the 2 stroke rivals.
- ☀【More Stable and High Speed】With powerful motor and 44 tooth 9 hole sprocket, this motor is with speed 27-32 MPH / or 43-51 KPH,high speed and work more effect.The tank holds 2 litres of petrol and everything comes with the kit.
- ☀【Quiet and Slight Vibration】With 41.8 x 36 mm bore stroke,49 cm3 displacement, oil tank capacity 2.5L,When you use it after installation, it only has a slight noise and slight vibration, which will not disturb.
- ☀【Application】49cc 4 stroke pull start petrol conversion kit fits adult bicycles, ideal for bikes with 26 inch frames and similar.
Check StockBJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System
- 【2-stroke 12HP Outboard Engine】Displacement: 169CC.
- Control System: Tiller control Starting System: Manual start..
- 【Details】Control System: #93 gasoline.
- Recommended Propeller range: 3 -9"1/4''x8".
- Recommended Lubricant: 2 Stroke Lubricating oil.
- 【Advantages】water cooling technology improves the reliability of the whole machine.
- light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
- 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
- after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
- 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
Check StockBILT HARD 301cc 10HP Gas Powered Engine, Horizontal 4 Stroke OHV Gas Motor, Shaft 1" Diameter, 3.48" Length, 1/4" Keyway, Replacement for Go Cart, Compressor, Log Splitter, Pressure Washer
- OUR MOST POPULAR 7HP GAS POWERED ENGINE- 7HP OHV 4-Stroke Recoil Starting Gas Engine is designed for all DIY or Professional applications. Capable of delivering Powerful Torque & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
- GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
- SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
- Always operate the machine according to directions in the user manual, always wear th....
Check StockTRIBLE SIX 50CC 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit Set (Black)
- 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter.
- Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- Key parameters: bore and stroke 40mm x 38mm=48cm3, Max. power 1.6Kw/6000r/min (3 horsepower/6000r/min), Super fuel-efficient, only consuming 1.5L fuel/100km.
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock