Top 4 layer Pcb

zgs78hh 18V Battery Chip Protect Board Replacement Battery Protection, Circuit Board for Makita BL1830 BL1850

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

MAXSUN iCraft B550 Gaming M-ATX Motherboard AMD AM4 Zen 3, DDR4, PCIe 4.0, SATA 6Gb/s, Dual M.2, USB 3.2 HDMI/DP, 2.5G LAN Micro ATX AMD Ryzen 5000 Series Processors CPU

  • 【AMD AM4 Socket】Supports AMD Zen 3 Ryzen 5000((R9 5950X overclock up to 4.79GHz) & Zen 2 Ryzen 3000 Series CPUs, AMD Zen 2 Ryzen 4000 with Radeon Graphics Cards GPU Processors APUs..
  • 【Super Power Design with 8-Layer PCB】14+2 phases digital power design, providing durable and stable performance. The 8-layer PCB quickly dissipates heat around the VRM to improve overall system stability and give the CPU more overclocking headroom..
  • 【Cooling New Design】Active VRM Heatsink and Large M.2 Heatsink. A VRM heatsink provides a large contact area for the MOSFETs and chokes, enables more efficient cooling for better performance and wattage resistance. The M.2 heatsink keeps the M.2 SSD at the optimum operating temperature for consistent performance and reliability..
  • 【Faster Connectivity】Dual Channel DDR4 Memory(Up to 128 GB 4*DIMMS ,MAX:4866 MHz), Ultra Durable PCIe 4.0 x16 Slot & Ultra-Fast M.2 SSD NVMe PCIe 4.0 x4 Connectors, USB 3.2, HDMI/DP, 2.5G Ethernet and 7.1 Channel HD Audio.
  • 【iCraft Sky Light RGB】Adopt skylight RGB, emits brilliant lights. Provide 2*3-pin ARGB(5V) and 2*4-pin NRGB(12V.). Lighting effects can be controlled via onboard buttons or dedicated software.
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

Troglodyte

  • Intel LGA 1200 socket: Ready for 11th Gen Intel Core processors.
  • Enhanced power solution: 8+1 power stages, 6-layer PCB, ProCool socket, and durable capacitors for stable power delivery.
  • Comprehensive cooling: VRM heatsink, flexible M.2 heatsink, PCH heatsink, hybrid fan headers and Fan Xpert 2+.
  • Next-gen connectivity: PCIe 4.0, Realtek 2.5Gb Ethernet, Intel Wi-Fi 6, rear USB 3.2 Gen 2, front USB 3.2 Gen 1 Type-C and Thunderbolt 4 support.
  • Two-way AI Noise-Cancelation: Reduce background noise from the microphone and audio output for crystal-clear communication in games or video conferences.
Check Stock

RunJRX Eva Keyboard PCB Foam 108 Layout,Poron Switch Pads 120Pcs and Keyboard Sound Dampeners for Custom Keyboard (RJ-146)

  • 【EVA MATERIAL】High density, micro-fine and homogeneous cell structure with excellent resistance to compression deformation. Widely used for sealing and vibration damping of components in communications, computers and household appliances..
  • 【SWITCH PADS】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds, keep the typing feel consistent.We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【KEYBOARD PCB FOAM】Modular design fits 108 Layout, no need to cut, easy to install. It is a new project to update the keyboard by filling the gap between the pcb and the positioning board, reducing vibrations and typing sounds..
  • 【USEFUL TOOLS】We prepar a plastic prying bar to help you dismantling your keyboard.Tweezers to help you put the switch pads..
  • 【PACKAGE INCLUDES】EVA Keyboard Pcb Foam 108 Layout x 1, Poron Switch Pads x 120, Plastic Prying Bar x 1, Tweezers x 1..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

CERWIN VEGA CVP2500.5D 1100W RMS 5-Channel Class- D Amplifier

  • Updated High-Efficiency Full Range Digital Topology : Enhanced Power IR Digital Chipset.
  • Conformal-Coated 4-layer PCB : Remote Turn On Configurator – REM/DC/VOX.
  • Boosted RFI (Radio Frequency Interference) Rejection : Compact Matching Heatsink Platform Dimensions.
  • Accepts : HI and LO Level Input Up To 12V Water-Resistant.
Check Stock

GRAYHILL 70M-IAC5 I/O Module

  • 4 DPDT signal relay module. TAKAMISAWA RY24W-K high quality relays, switch contact material - gold overlay silver-palladium..
  • Darlington transistor circuits drive relay coil, LED indicator for each relay channel..
  • High quality screw terminal block. FR-4 fiber glass PCB, dual copper layers..
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/91Ml0Tph-rL.pdf.
Check Stock

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

  • 4-layer, 2 oz copper PCB for improved heat dissipation.
  • Can interface directly with 3.3 V and 5 V systems.
  • Simple step and direction control interface.
Check Stock

Leopold FC750R Navy/Blue PD TKL Double Shot PBT Mechanical Keyboard Cherry MX Blue

  • 87Keys High-End Mechanical Keyboard CHERRY MX.
  • 1.5mm PBT Double Shot / Interface : USB & PS2.
  • Key Pitch : 19mm / PCB : FR-4 Dual Layer.
  • Weight : 1kg / Dimensions : 362 x 140 x 33mm.
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ...e to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shape....
Check Stock

DollaTek StepStick 4-Layer DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988

  • Simple step and direction control interface.
  • It can directly interface with 3.3V and 5V systems.
  • Thermal shutdown overtemperature, shutdown overcurrent, and under-voltage lockout.
  • 4 layers, 2 oz copper PCB for better heat dissipation.
Check Stock