Top 4 to 1 Multiplexer

Treedix TCA9548A I2C Multiplexer Breakout Board 8 Channel Expansion Board with pi Header for Arduino

  • The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
  • TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
  • The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
  • In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
  • The chip is compatible with 3V and 5V and can be used with any logic level.
Check Stock

OEM Nexperia 74HC4067PW,112, Analog Switch/Analog Multiplexer Single 16:1 24-Pin TSSOP Bulk (100 Items)

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

16-Channel BNC Video Multiplexer Picture-in-Picture Video Processor

  • Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously..
  • Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console..
  • 16 individual input buttons for fast switching between each video input. 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording..
  • 4 audio inputs with 1 audio output. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation..
  • Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time..
Check Stock

Analog Demultiplexer, CD74HC4067 High Speed Analog Multiplexer Two-Way Connection Analog Multiplexer High Speed for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
Check Stock

InstallerCCTV Video Quad Color 4CH Multiplexer 2 BNC Output with Remote Control and Free 1Amp Power Adapter…

  • Full quad display at real-tme refresh rate.
  • Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
  • Free 1A Power Adapter and remote control Included.
Check Stock

10 PCS Analog Multiplexer,Breakout Board Module,CD74HC4067 High Speed CMOS 16-Channel Analog Digital Multiplexer Demultiplexer,Suitable for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

Analog Multiplexer, High Speed 16 Channel Bidirectional 10PCS Analog Demultiplexer for Radio Communication

  • 5Pcs/lot 74Hc4051 Analog Multiplexer Single 8 1 16-Pin So Bulk 74Hc4051d.
Check Stock

CCTV Camera Pros VM-16RT BNC Video Mux | 16 Channel CCTV Security Camera Multiplexer | Real-time Live Streaming Refresh Rate | Monitor Spot/Loop Out

  • 16 Camera Inputs - Supports up to 16 Analog cameras via the 16 BNC video inputs..
  • 16 Camera Outputs - 16 BNC video loopouts allow each camera to be connected to additional devices such as DVRs or VCRs..
  • Supports PTZ Cameras - The RS-485 terminals can control the motions of pan, tilt, and zoom (PTZ) cameras..
  • Rackmountable Case - The 1U rackmount case gives users the option to mount it in a standard 19 inch server rack..
  • Multiple Viewing Modes - This video multiplexer supports multiple camera grid displays including a 16 channel, 8 channel, 4 channel, 1 channel, PIP, and more..
Check Stock

DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module Compatible with Ar-duino DIY

  • ★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • ★6ns break-before-make @ 4.5V,"On" resistance: 70 Ohms @ 4.5V.
  • ★Wide operating temperature range: -55C to 125C.
  • ★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above.
Check Stock

Evertech 4 Channel Analog Color Quad Processor CCTV Security Camera System Video Splitter

  • Compatible with all Traditional ANALOG Cameras, NOT Compatible with 720P/1080P AHD / TVI / CVI / HD-SDI Cameras.
  • This is 4 Channel Digital Color Quad Processor with Remote Control and a standard 12V DC power supply adapter. It is useful in video surveillance systems that have complex monitor display requirements. Great for those who only wants to view their camera and do not need to record..
  • Multi display mode : Full screen, electronic amplification, 4 picture, Picture in Picture, Auto switch display mode.
  • NTSC: 720x480. The image quality of 8 camera multiplexer is adjustable, and it has digital zoom function, auto sequential switching, and multi channel freezing function and so on.
  • One Year Warranty and free tech. support.
Check Stock

Harris Corporation Multiplexer 2 x 4:1 16-SOIC (Pack of 584)(CD74ACT153M)

  • SN74CBT3253 FET Multiplexer Demultiplexer Module Control Module 4V to 5.5V CJMCU-3253.
Check Stock

4-Channel Mini Quad Video Processor with IR Remote + Multi-View Screen

  • Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console..
  • 16 individual input buttons for fast switching between each video input. 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output..
  • 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation. Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time..
  • Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, moti....
Check Stock