Top 4 way Signal Amplifier

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • The RP-2000.1D is one of the most popular amplifiers ever released from Skar Audio and for good reason. Designed for maximum power, efficiency, and affordability, every feature of this amplifier exemplifies its high quality engineering. This amp is rated at a conservative 2,000 watts RMS power at a 1 ohm operating load, and is capable of putting out over 2,800 watts max power at 1 ohm..
  • Featuring a high speed MOSFET power supply, 4-way protection circuitry, advanced PCB board design, and other internal high quality components, the RP-2000.1D outperforms anything else in its class when it comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Powe....
Check Stock

Alpine R-A90S R-Series 6/5/4/3 Channel Power Amplifier with Staggered Power

  • 6-channel car amplifier, 75 watts RMS x 4 + 150 watts RMS x 2 at 4 ohms, 100 watts RMS x 4 + 250 watts RMS x 2 at 2 ohms, 200 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 bridged at 4 ohms.
  • GTO (Great Turn On) signal-sensing turn-on with Ch1/2 speaker-level input.
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier.
  • Staggered power amplifiers are perfect for a 3-way front-stage setup,and work great for a front/rear/sub stereo as well..
Check Stock

ATT Signal Booster AT&T Cell Phone Signal Booster 4G LTE Cell Phone Booster AT&T Cell Signal Booster T-Mobile Cricket Band 12/17 AT&T Cellular Signal Booster Amplifier Repeater Cell Extender for Home

  • ...ng at&t cell phone booster, please feel free to consult us. We are very very very pleased to help : ).
  • AT&T Cell Phone Signal Booster work for AT&T T-Mobile Cricket U.S. Cellular 700MHz 4G LTE band 12 Band17 cellular band, AT&T Signal Booster can receive the signal from the signal tower, and then amplifier your mobile signal. this cell signal booster amplifier supports any phones for any Wireless Carriers in the frequency range : Downlink :728-746 MHz Uplink : 698-716 MHz..
  • Low Operating Temperature, High-Gain Linear Power 4G Signal Booster. This cell phone signal booster amplifier supports Multiple Users Simultaneously, the mobile signal Amplifier ‘s Coverage Range can up to 2-4 rooms 4,000 sq.ft ,.
  • Better cell phone voice quality, faster uploads&downloads Data, get fewer Droppped calls. This cell phone booster for home supports voice and 4G data for 4G/LTE mobile phones, including IOS, Android, Windows Phone Systems, etc., the cell phone signal booster for home cell booster boost 4G LTE Data Signal, perfect for people needing fast uploads and downloads for streaming apps such as Google Chrome, Safari, YouTube, Netflix, Facebook, Pandora, Spotify, and other data-heavy apps..
  • Cell booster for home solve your bad mobile netw....
Check Stock

Crunch PDX-1000.2 PowerDriveX 1000 Watt 2 Channel Exclusive Blue A/B Car Stereo Amplifier

  • 1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power.
  • 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged.
  • 2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply.
  • Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • INPUTS/OUTPUTS: Low level RCA inputs and outputs.
  • Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA).
  • FEATURES: Flexible installation allows this amplifier to run in 2 channel or bridged mono mode.
  • Designed to be high sound quality with minimal distortion.
  • Maximum heat dissipation which minimizes distortion.
  • SPECIFICATIONS: Variable voltage: 0.2 5 volts.
  • Crossover type: Electronic switch FULL / LPF / HPF.
Check Stock

CUEI 4 Way AV Switch RCA Switcher, 4 in 4 Out Stereo L/R Audio Selector Box, Aluminium Alloy Multifunctional Audio Switch Splitter with IR Remote Control for DVD, Game Consoles, TV, Speakers

  • ... You can connect the RCA audio output device audio source of different audio type devices to the RCA input on our device to realize sharing music..
  • 【EASY OPERATION】This RCA switch box is suitable for multiple sources signal select or large area or multi-room paralleled amplifier distribution of the same signal playback, it uses audio rotary switch or lossless device, easily switch between different audio inputs or outputs..
  • 【PLUG AND PLAY】This RCA multiple splitter features with easy installation and operation, no extra power supply or software drive needed, plug and play, and won't affect sound quality. It comes with IR wireless remote switch for multiple viewing monitors or dubbing projects..
  • 【WIDE COMPATIBILITY】This multifunctional RCA stereo splitter box is suitable for multi source signal selection or multi room parallel amplifiers or active speakers to distribute the same signal for playback. Perfect for XBOX, DVD, for PS2, for PS3, for Wii Cable box to one TV..
  • 【100% QUALITY ASSURANCE】We are very confident in the quality of this 4 way RCA splitter, and p....
Check Stock

CeKay Outdoor Digital HD TV Antenna with High Gain and Low Noise Amplifier for UHF/VHF - Long Range, 40FT RG6 Coaxial Cable, 2 Way Splitter, Easy Installation - Upgraded Version

  • 【Easy to Installation】 Just connect the amplifier to the antenna and TV or STB box, then plug into the USB port for getting power, HD digital TV antenna amplifier works with any non-amplified indoor tv antennas. The number of channels reception will vary depending on your surroundings and how far away you are from broadcast towers..
  • 【Signal Booster】 The Digital TV Antenna Amplifier has build-in 4G LTE Filter, blocks 3G and 4G wireless signals, it will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers..
  • 【High Performance With Low Noise】 This Amplifier has very good performance to strengthen the signal received by digital tv antenna. It improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital hdtv with very low noise!.
  • 【Warmly Reminder】If your house is very close to the broadcast tower and the signal is already very strong, we do NOT recommend using this amplifier/booster, if your stations are far away t....
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock

Fifine Headphone Amplifier 4 Channels Metal Stereo Audio Amplifier,Mini Earphone Splitter with Power Adapter-4x Quarter Inch Balanced TRS Headphones Output and TRS Audio Input for Sound Mixer-N6

  • 【Share A Single Stereo Source】Amplifier 4 channel with separate volume knob for each of up to four outputs: No audio crackle, minimal distortion at highest volumes. No loss of signal when all four headphones are connected. Headphone amplifier 4 channel would be excellent for up to four people monitoring the mix for tracking, live uses and listen to the TV with earbuds while working out..
  • 【Fantastic Stereo Audio Quality】Mini stereo amplifier with 4X 1/4'' Stereo Headphone TRS Output Connector Jacks, 1/4'' TRS Source Input Connector Jack. ◆Stereo ◆: You must use the 1/4” TRS stereo audio cable male to male connectors for input and output connection. ◆Mono◆: 1/4” TS male to male connectors for input and output connection. ■■TRS/TS cable is not included in package■■.
  • 【Compact and Portable】Solid metal build construction headphone splitter, tight connections, smoothly operating knobs. Quality components and exceptionally rugged construction ensure long life. Ultra-compact headphone distribution amplifier for studio and stage applications..
  • 【Used for Applications】Features a durable and compact design headset amplifier perfect for both on-stage and in-studio performances or application that requires multiple headphone connect....
Check Stock

Seismic Audio Speakers Epicenter 5004 4 Channel Power Amplifier, 2000 Watts RMS Amplifier

  • Power Amplifier: Our Epicenter Amplifier is a beast! This is a 4 channel amplifier capable of pushing just about anything..
  • Audio Amplifier: This is a high end amplifier that is rack mountable. This power amplifier is easily capable of pushing eight 18" subwoofer cabinets or two pairs of dual 15" speakers..
  • 2000 Watts RMS Amp: This audio amplifier can handle 4 x 500 Watts RMS at 8 Ohms, 4 x 850 Watts RMS at 4 Ohms, 2 x 1600 Watts RMS at 8 Ohm Bridge of power..
  • 4 Channel Amplifier: The front of the Seismic Audio Speakers’ amplifier has channel A, B, C, and D volume controls, power indicator, clip indicator, protection mode indicator, and signal indicator..
  • Size And Weight Details: This 2000 Watts RMS amp fits standard 19” rack cases and weighs 69 lbs..
Check Stock

AudioControl LC-6.1200 125W x 6 Car Amplifier

  • Configurable as 6/5/4/3/2 channel amplifier.
  • 6 x 200 watts @ 2 ohms - 6 x 125 watts @ 4 ohms.
  • 400 watts @ 4 ohms bridged - AccuBASS Processing.
  • MILCTM Maximum Input Level Control - GTO Signal Sense - 6 preamp inputs.
  • 3-way Independent Linkwitz-Riley Alignment crossovers - 2 assignable preamp outputs - PFM Subsonic Filter.
Check Stock

AudioControl LC-6.1200 125W x 6 Car Amplifier

  • Configurable as 6/5/4/3/2 channel amplifier.
  • 6 x 200 watts @ 2 ohms - 6 x 125 watts @ 4 ohms.
  • 400 watts @ 4 ohms bridged - AccuBASS Processing.
  • MILCTM Maximum Input Level Control - GTO Signal Sense - 6 preamp inputs.
  • 3-way Independent Linkwitz-Riley Alignment crossovers - 2 assignable preamp outputs - PFM Subsonic Filter.
Check Stock

Soundavo PSB-400DSP Class D Subwoofer Amplifier with DSP and LCD Presets Display for Home Theater 400W RMS / 1000W Max …

  • ✅【High Wattage Power Output】Compact 1U design subwoofer amplifier delivers plenty of solid clean power with high fidelity, strong and deep bass frequency to drive medium-to-large sized in-wall or floor stand style subwoofer speakers. It provides 400 watts RMS @ 4 Ohms (1000 watts peak power ), makes your home audio and home theater audio system’s bass shocking auditory effects feel like in the cinema..
  • ✅【Easy Connection to Any System】Features a stereo/mono line level audio input that can receive full band audio from any audio amplifier, receiver or preamp or an LFE input, also features a stereo speaker level input/outputs connector and passthrough for easy to work with older amplifier/home theater receiver do not have line level outputs..
  • ✅【Memory Store and Recall】 Set and save your 3 favor bass frequency and volume level setting for music listening, movies and late night mode..
  • ✅【DSP Processor】Built-in digital signal process (DSP), access the menu function screen for using the selection knob to choose and adjust Master Volume Level, Crossover Frequency, 4 different Crossover Slopes, Phase, 4 different Low Cut. Allows store up to 3 presents are optimized for 8”, 10” and 12” subs..
  • ✅【Audio On/Off Detects & 12VDC Tr....
Check Stock