Top 40 Pin Gpio Header - BuyWiseBest.com

WayPonDEV NanoPi NEO Core Open Source Quad-core Cortex-A7 1.2GHz Allwinner H3 Single Board Computer Onboard DDR3 512MB RAM & 8GB eMMC Run Ubuntu Core and Armbian System (with Pin Header)

[CPU Performance]The NanoPi NEO Core is equipped with Allwinner H3 board ,it is Quad-core(Cortex-A76x4) CPU with a main frequency of up to 1.2GHz.
FriendlyCore 16.04(based on UbuntuCore-16.04).
FriendlyCore Focal (Base on Ubuntu 20.04).
[Pin-header] GPIO: two 2.54mm spacing 12x2pin header,one 2.54mm spacing 10x2pin header.
It includes UART, SPI, I2C, USB, I2S, Ethernet, GPIO etc..
[Connectivity] Ethernet: 10/100M Ethernet.
[Wiki] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO_Core. Any after-sales problems, please contact us by our tech-support click "WayPonDEV" store or leave the message in our forum by "forum.youyeetoo .com/" and ask the question..

Assembled RPI GPIO with 8" 40 pin ribbon cable for Raspberry Pi 3B, Raspberry Pi 2 model B, Raspberry Pi 1B+, Raspberry Pi 1a+, Raspberry Pi zero w, Raspberry Pi zero.
40 pins are labeled for easy prototyping.
Gpio adapter plus for Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi is not included.

【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
Material: High-quantity copper soft wire material for safe and durable.
Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit....

8" 40 Pin Ribbon Cable for Raspberry pi 3B ,Raspberry pi 2 model B,Raspberry pi 1B+, Raspberry pi 1A+,Raspberry pi zero W, Raspberry pi zero.
Pin Pitch: 2.54 mm,Their Diagram as Product image show.
2x40 Pin Male to female IDC 2.54mm pitch ribbon cable flat GPIO Cable.
GPIO 40P 40-pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ and 3.5¡± 5 inch TFT touchscreen LCD display are not including..
SamIdea is a Registered Trademark, can not sold without authorization..

There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate. Onboard DAC8552, 2ch 16bit high-precision DAC.
Onboard input interface via pinheaders, for connecting analog signal. Onboard input/output interface via screw terminals, for connecting analog/digital signal. Features AD/DA detect circuit, easy for signal demonstration.

Raspberry Pi Expansion Board, Power Relay.
The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
Standard Raspberry Pi 40PIN GPIO extension header, Supports Raspberry Pi A+/B+/2B/3B/3B+/4B and later versions.
High quality relays, loads up to 5A 250V AC or 5A 30V DC.
Photo coupling isolation, prevent interference from high voltage circuit.

1.4GHz 64-bit quad-core processor, dual-band 2.4GHz and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT)..
Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports and Extended 40-pin GPIO header..
1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port..
1GB LPDDR2 SDRAM；Micro SD format for loading operating system and data storage. (Micro SD is Not included.).

Hardware Specs - Quad-core ARM Cortex-A55 (ARM v8.2-A) 64-bit SoC CPU @ 1.9Ghz, GPU 2x ARM Mali-G31 @ 850 MHz, 2GB LPDDR4-3733 SDRAM, 8GB eMMC 5.1, 802.11ac/b/g/n 1T1R WiFi + Bluetooth 5.0, 4 x USB 3.0 Ports, 100M Ethernet Port, Standard 40 Pin GPIO Header Compatible with Raspberry Pi, HDMI 2.1 (Up to 4kp60 Supported), Micro-SD Card Slot, 5V DC via Micro USB Connector..

【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
【FAN Header】5V/12V, allows speed adjustment and measurement.
【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.

Power Monitoring HAT allows the user to monitor current, voltage, or power in each channel.
Standard Raspberry Pi 40PIN GPIO extension header.

Includes Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE).
2.5A Power Supply Designed for Raspberry Pi-HDMI-Mini HDMI Adapter-Micro USB OTG.
Premium Black Case with 3 Covers-1 Closed Cover-1 with GPIO Access Cover-1 with Camera Mount Cover.
40 Pin Header---Heatsink for Raspberry PI Zero--Camera Module Adapter.
All Parts Covered Under the Vilros 1 Year Warranty.