Top 440c Bar Stock

VERNUOS 1/8\ x 1\ C360 Brass Flat Bar 12\ Long Solid .230\ Mill Stock

  • ✿ If you are a lover of DIY crafts, you should prepare this brass flat bar, because it is indeed widely used and multifunctional, you will definitely use it..
  • ✿ Brass bar stock is made of brass material,has nice bend-ability and good processability, you can use it according to your requirement..
  • ✿ Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
  • ✿ Our brass stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✿ Widely used in knife, jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc.
Check Stock

Imperial Schrade 278 Jackmaster Barlow Folding Pocket Knife

  • COLLECTOR QUALITY: Handmade in the Boker Knife Factory in Solingen, Germany. Knife includes high quality felt case for carrying and safe storage.
  • CLASSIC BARLOW BY BOKER: This modern take on the Barlow goes with extended bolsters and premium Grenadill Wood scales for a lightweight construction that feels good in hand.
  • 440C BLADE: Ice hardened 440C steel, slipjoint, nail nick opener, satin finished for a nice shine.
  • NITTY GRITTY: Overall Length: 6.1 inches, Blade Length: 2.76 inches, Weight: 2oz. Made in Solingen, Germany..
Check Stock

E. Rousseau Studio Jazz Soprano Saxophone Mouthpiece 6

  • S90 Soprano Saxophone Mouthpiece Model 180.
  • The S90 Model Soprano Sax mouthpiece is precision machined from hard rubber bar stock material.
  • It features a square throat design and responds easily over all registers, making it an ideal choice for classical as well as studio work.
Check Stock

5 Piece ALUMINUM ROUND ROD ASSORTMENT 7/8\

  • Easy to machine or weld aluminum rod for milling or lathe work in a variety of applications and industries.
  • All aluminum rods are sourced from 100% domestic products and mill certifications are available upon request.
  • 6061 commercial grade aluminum stock is known for its exceptional toughness and high strength-to-weight ratios.
  • General purpose aluminum round bar for prototyping or production runs including machining and finish coatings such as anodizing.
  • Aluminum bar stock is an exceptional building and project material that will not rust and will last for years to come.
Check Stock

Selmer Paris S90 180 Soprano Saxophone Mouthpiece S411180

  • S90 Soprano Saxophone Mouthpiece Model 180.
  • The S90 Model Soprano Sax mouthpiece is precision machined from hard rubber bar stock material.
  • It features a square throat design and responds easily over all registers, making it an ideal choice for classical as well as studio work.
Check Stock

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

  • When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
  • The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
  • The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher....
Check Stock

Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

  • What is a featherboard you might ask? Is it something I need for my workshop? Well the short answer is yes. Anyone who has a table saw or router table should seriously consider having at least one. Most work shops have more than one handy at any given time. Featherboards are simple devices that help keep your stock up against the fence your running your stock on. They generally act like a third hand by helping you control your stock while you push your stock through..
  • The Fulton Dual Deluxe Stacked Featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence..
  • Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in....
Check Stock

Washi Beauty - Eco Student Shear 6.0” Professional Stainless Steel Hair Shear Scissor

  • Japanese 440C Steel / 6.0” Total Length Shear / Great Basic Starter Shear for Students & New Stylists.
  • Perfect Back Up Shear / Exceptional Quality / Smooth Cut / Features Washi No Push Convex Edges.
  • Easy Click Dial Tension Assemble, Making Tightening and Loosening Shear Simple (No Tool Required).
  • High Quality Japanese 440C Steel - The Edge Will Last! / Stainless Steel That Will Not Rust or Corrode / Permanent Finger Rest / Silence Bumper for No Noise and a Smooth Feel When Closing.
  • Washi Maintenance is Always Included which has Free Oil, Cloth, & Finger Inserts.
Check Stock

1' X 6' ALUMINUM 6061 FLAT BAR 6' long T6511 Solid Extruded Mill Bar Stock

  • Easy to machine or weld aluminum rod for milling or lathe work in a variety of applications and industries.
  • All aluminum bars are sourced from 100% domestic products and mill certifications are available upon request.
  • 6061 commercial grade aluminum stock is known for its exceptional toughness and high strength-to-weight ratios.
  • General purpose aluminum round bar for prototyping or production runs including machining and finish coatings such as anodizing.
  • Aluminum bar stock is an exceptional building and project material that will not rust and will last for years to come.
Check Stock

Socp Dagger Family Edc Camping Fixed Blade Boot Knives Spear Point, Coated Finish Black Handle With Sheath And Clip (Black)

  • Total Length: 17CM（6.7IN）/ Blade: 6.4CM（2.5IN） / Blade Width: 1.8CM（0.7IN） / Blade Material: 440C Stainless Steel /Blade Thickness: 4MM（0.15IN）/ Handle Length: 10.6CM（4.1IN）/ Net Weight: 78G / Total Weight: 91G (Including Scabbard) / Scabbard Material: Nylon Wave Fiber.
  • Blade: 440C Stainless Steel Black Coated Finish With Balanced Hardness And Corrosion Resistance.
Check Stock

Brass Flat Bar 10mm Thickness x 25mm Width x 152mm Length C360 Brass Flat Bar Stock 6 Long Solid Plate Mill Stock

  • ✿ If you are a lover of DIY crafts, you should prepare this brass flat bar, because it is indeed widely used and multifunctional, you will definitely use it..
  • ✿ Brass bar stock is made of brass material,has nice bend-ability and good processability, you can use it according to your requirement..
  • ✿ Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
  • ✿ Our brass stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✿ Widely used in knife, jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc.
Check Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock