Top 45 Degree Bend

Math Geometry Set Blue Pencil Box for High School 10 Piece Pencil Compass Rulers Eraser Pencil Sharpener Lead Refills Drafting Drawing Kits Blue

  • 10 Piece Geometry Set: 4" protractor, compass, pencil, eraser, 2 blue metal study compasses, 2 triangles (45° & 30°/60°), 6" ruler, pencil....
  • Drafting kit: Perfect for students, teachers, math experts, architects, engineers, artists, designers at any level. Used in school, office, home,....
  • Protractor for geometry: Contains 6" 15cm ruler, 180 degree protractor, 45 degree and 60 degree triangles..
  • Compass Geometry Set: Durable metal compasses will not bend or flex, universal holder compass work with any standard sized pencil or pen, Rulers,....
  • Good gift for Teachers and Students: A perfect gift for your family and friends, easy to take to class and store in the classroom and at home. Just....
Check Stock

Albion Engineering 935-4(3 Pack) Bent Cone Nozzle for Albion B-Line Sausage Guns, Pack of 3

  • Fits B-Line sausage guns such as the B12S20 with black plastic front cap #873-5. Comes in a pack of 3..
  • Nozzles are bent at 45 degree angle to give you additional reach and the ability to get around corners. 7″ long: 1.5″ straight then 5.5″ additional after 45 degree bend..
  • Reduces strain by eliminating the need to hold dispensing guns at uncomfortable angles.
  • Trim with a utility knife to desired size and shape opening.
  • Use with 421-G01 Ring Cap and Beadscope 360 Nozzle 1083-G01.
Check Stock

Speedway Motors Stainless Steel Exhaust Pipe Mandrel Bend, 45 Degree, 2-1/2 Inch

  • Premium heavy-duty T304 stainless steel construction for consistent performance and reliability.
  • Each pipe is expanded on one end to allow easy slip fit installation over another 2-1/2" OD exhaust pipe.
  • This 45 degree mandrel bend is full size throughout the bend to maximize flow and increase horsepower.
  • Build your own custom exhaust systems and headers.
Check Stock

Universal 3 Inch Custom Tubing Mandrel Bend Pipe Straight & U-Bend Kit

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 3″ exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • 3″ mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Each 3″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends, and 46″ inch straight pipe exhaust lengths.
Check Stock

The Light We Lost

  • ★ Set Includes: 1 x pointed hook, 1 x bend hook, 1 x 45 degree hook, 1 x90 degree hook. Four different angles of groove head, to meet your different needs. Ultra-fine tips precisely probe, pierce, pry, pull, and position small parts in tight spaces..
  • ★ Materials: Made of high quality steel and rubber covered non-slip handle, durable in use..
  • ★ Rubber-coated Handle: Non-slip handle with padding provides extra control and helps with precision work or handwork. The handle is concave and convex with a striped front edge design that conforms to the hand grip pattern and is non-slip to save effort..
  • ★ Extended Size: Full length 9.45 inch, handle length 3.54 inch, rod length 3.54 inch, rod thickness 0.12 inch..
  • ★ Universal Design: This kit can be conveniently used for ignition system, intake valve, rifle bolt surface, seals, fuel valve O-ring, hose end O-ring and various electronic equipment. It is your right assistant for repair or disassembly. Ideal for assembly, repair, or removal of small parts..
Check Stock

2.5 16Pcs Mild Steel Mandrel Exhaust Tubing Pipe Straight & U-Bend For Intake Exhaust

  • ▶Size: 2.25" Outside Diameter (OD) , Average Leg Length = 5 1/2".
  • ▶Material: 304 Stainless Steel. Raw Finish , True Mandrel Bends.
  • ▶Universal Fitment: Installation should depend on the inside diameter and outside size.
  • ▶Package includes: 2x 180 Degree U Bend Piping, 2x 90 Degree Right Angle Piping, 2x 45 Degree Piping, 2x Straight Piping (Instruction is not....
  • ▶DIY for yourself: Perfect Do It Yourself kit with plenty of options for your motorcycle, automotive, hotrod, atv or any other need you may have..
Check Stock

Aluminized Steel 3.00 Diameter Universal U-Fit 16 Pieces Dual Exhaust Replacement Pipes Kit Mandrel Bent Tube Tubing Tail Pipe Tailpipe System

  • Outside Diameter 2.50''/63.5mm - Wall Thickness 0.06''/1.5mm.
  • Includes 4 Each: 45 Degree Bends, 90 Degree Bends, 180 Degree Bends, and 48" Straight Pipes.
  • FORTLUFT provides the guarantee for the Universal Sets Mandrel Exhaust Bend Pipes & Straight Pipes Aluminized Steel 16 Pcs 2.50''/63.5mm - 3.00''/76mm....
Check Stock

Mid Valley - 3'OD DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-bend Kit Set of 16

  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation..
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • Package Included 4 x 48″ Straight Pipes 4 x 90 Degree Pipes 4 x 45 Degree Pipes 4 x 180 Degree U-Bends As our pics shown.
Check Stock

KOTVTM 2" Stainless Steel Elbow 45° Mandrel Bend Elbow - 1.5D/3" CLR Loose Radius - 16GA/.065" Wall - 2" Legs - SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Pipeline engineering, etc

  • 【Material】: SS304 Stainless Steel 45° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, Pipeline engineering, etc.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

WISEPRO Long Reach 11inch/16inch Plier 3-Piece Set – 90-Degree Angle, 45-Degree Angle And Straight Needle Nose

  • Extra long nose pliers are forged from a solid piece if chrome vanadium steel with fine polishing,according to hardening,temper and anneal to confirm stronger..
  • Work around obstructions, grip small parts, and bend wires, using the WISEPRO 11 Inch/16 inch Long Needle Nose Pliers Set.
  • Each set includes a straight needle nose plier, a 45-degree angle needle nose plier and a 90-degree bent needle nose plier ..
  • 3 piece long reach pliers set allows you to access limited clearance areas while keeping your hands safe from sharp and hot surfaces.
  • Bend, shape, and twist wire, hold and pull tiny fasteners, and work with objects that are just too small for your fingers..
  • Comfortable handle with concave-convex feeling design,reduce friction,anti-slip..
  • WISEPRO always uphold the quality of survival,if having any issues,please don't hesitate to contact us anytime.we will reply you in 12 hours..
Check Stock

3'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING))

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

W4-Moto 12 Ton Heavy Duty Hydraulic Tube Bender 180 Degree Tubing Metal Steel Iron Exhaust Pipe Bending with 6 Dies Sets 1/2",3/4",1",1-1/4",1-1/12",2" (RED)

  • ...road building, bridges or ships pipeline laying or repairing..
  • 【6 Adjustable Roller Levels 6 Dies】Bending bars can easily be adjusted to distances of 8-1/2", 11-1/4", 12", 16-3/4", 19-1/2" and 22-1/2", so you can adjust the top rollers for degree of bend to meet the bending angle of the tube.Except the pipe bender, the package includes 6 precision cast dies of 1/2'', 3/4'', 1'', 1-1/4'', 1-1/12'' and 2". So you don’t need to buy dies, this pipe bender is able to fully meet all your needs..
  • 【180 Degree Bending】Compared to other bender that only can bend tube to 90 degree angle, our pipe bender can bend tubing to angles up to 180 degrees smoothly so that reduce your workload and increase working efficiency..
  • 【Great Material】Material of premium steel, this tube bender is heavy duty to hold up to 12 ton weight capacity. And the hydraulic system and pull-back spring system help you get the bending job done efficiently.45# steel frame, high strength & toughness, and wear resistance. Stable four-feet design enhanced working time ....
Check Stock