Top 4800rpm At Max Efficiency

Barrow Pump for watercooling 18W PWM (HalfCover)- Plexi Pump top with Black Pump Ring

  • 18W PWM (HalfCover)- Plexi Pump top with Black pump Ring.
Check Stock

upHere 120mm PWM 4-Pin High Airflow Long Life Case Fan for PC Cases, CPU Coolers, and Radiators 3-Pack,SR12-BW4-3-US

  • Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency..
  • Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling..
  • 1600rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control 120x120x25 mm, 12V, 4-pin PWM, max. 1600 RPM, max. 19.9 dB(A),max.68.62CFM.
  • The performance-oriented top speed of the 1600rpm PWM version is ideal for high efficiency case, radiator and CPU cooling as well as other applications that require both extended performance headroom and PWM for automatic speed control..
  • What You Get:SR12-BW4 Case Fans, our worry-free 12-month warranty and friendly customer service..
Check Stock

MARS HYDRO FC-E4800 LED Grow Light 4x4ft Full Spectrum Grow Light Bar with 2646pcs Diodes 480Watt Plant Growing Light Dimmable Commercial Grow Lamp Daisy Chain Detachable,Achieve 2.8 umol/J

  • HIGH-EFFICIENCY LED GROW LIGHT: MARS HYDRO FC-E4800 grow light with 2646pcs BridgeLux Diodes, market-leading 2.8 µmol/J PPE, Max 2.5g yield/watt, 480 Watt with smaller footprint for better crop quality, more cost-effective. 4x4ft for personal grow, 3x3ft for commercial grow..
  • INNOVATIVE PRECISE UNIFORM LIGHTING: Built-in removable bars interval & dimmability enable the exact dynamic PPFD control over each of plant growing stages, FC-E4800 easy-to-install detachable bars deliver uniform adjustable PPFD levels throughout plant canopy, best for more uniform Density Buds..
  • ● DIMMABLE COMMERCIAL GROW LIGHT: Easy dimming & daisy chain max up to 20 lights, IP65 Waterproof, master light easily controlled, making it a high performance commercial grow light for enormous yields. Also perfectly suit full-cycle hydroponic, soil, grow tent/room growing..
  • ● SUPERIOR HEAT DISSIPATION: Detachable power supply can be mounted remotely on the side of a grow tent/rack or on adjacent wall to remove heat from grow space.
  • real Aluminum heatsink & 6 slim profile passive cooled bars (THINNER & LARGER surface) creat less heat, drop 50% in electricity bill than HID lights!.
  • ● FULL SPECTRUM UV IR GROW LIGHT: With Yield Max spectrum (660nm Osram enhanced Deep Red,280....
Check Stock

Thorogood 888-5002 Men s Heavy Duty Crew Sock Coyote - Medium

  • Heavy duty cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 43.5 dB(A), >150,000 h MTTF.
  • Award-winning 120x25mm fan with Focused Flow frame for high static pressure and superior cooling efficiency.
  • 12V 3000rpm model (43.5dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 750-3000rpm speed range.
  • High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection.
  • Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection.
Check Stock

The Book of Five Rings

  • 14 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum....
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig....
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and....
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum....
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is....
Check Stock

Noctua NF-F12 iPPC-24V-3000 Q100 IP67 PWM Heavy Duty Cooling Fan 4-Pin 3000 RPM 24V Version 120mm Black

  • Heavy duty cooling fan, 120x120x25 mm, 24V, 4-pin PWM, AEC-Q100, IP67 certified, max. 3000 RPM, max. 41,3 dB(A), >150.000 h MTTF.
  • Award-winning 120x25mm fan with Focused Flow frame for high static pressure and superior cooling efficiency.
  • 24V, 3000rpm industrialPPC (Protected Performance Cooling) version with 4-pin connector and PWM speed control (1600rpm max. in 12V PC environments).
  • AEC-Q100 qualified NE-FD4 motor driver IC with extended burst and surge immunity for automotive applications and harsh electronic environments.
  • Ruggedised fibre-glass reinforced polyamide construction and IP67 certified water and dust protection.
Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • ...ower leads. No need to purchase adapter cables, connect to motherboard and GPUs directly. Load decibels: about 68-70DB. It can be used at 176-264V voltage. （Can not be used at household voltage of 110V） The number of revolutions is as high as 7000 rpm per minute so the heat dissipation effect is good. The power efficiency is about 90%. Please reserve about 300W for the motherboard, fan, and other wire consumption..
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is 2000W, and the output power=2000*90%. So we recommend to run 8 PCS 3070/6800/6800XT 6900/6900XT GPUs simultaneously, run max 5 PCS 3090, run max 6PCS 3080 without overclocking. Note: GPUs longer than 32 cm in length are unavailable. We don’t recommended to mix various types of GPUs..
  • 【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner ....
Check Stock

Noctua NF-F12 iPPC 3000 PWM, Heavy Duty Cooling Fan, 4-Pin, 3000 RPM (120mm, Black)

  • Heavy duty cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 43.5 dB(A), >150,000 h MTTF.
  • Award-winning 120x25mm fan with Focused Flow frame for high static pressure and superior cooling efficiency.
  • 12V 3000rpm model (43.5dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 750-3000rpm speed range.
  • High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection.
  • Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection.
Check Stock

Noctua NF-A14 iPPC-3000 PWM Heavy Duty Cooling Fan 4-Pin 3000 RPM 140mm Black

  • Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 41.3 dB(A), >150,000 h MTTF.
  • Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency.
  • 12V 3000rpm model (41.3dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 800-3000rpm speed range.
  • High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection.
  • Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection.
Check Stock

Noctua NF-A14 iPPC-2000 PWM Heavy Duty Cooling Fan 4-Pin 2000 RPM 140mm Black

  • Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 2000 RPM, max. 31.5 dB(A), >150,000 h MTTF.
  • Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency.
  • 12V 2000rpm model (31.5dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 500-2000rpm speed range.
  • High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection.
  • Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection.
Check Stock

Noctua NF-A14 iPPC-2000 IP67 PWM Heavy Duty Cooling Fan 4-Pin 2000 RPM 140mm Black

  • Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, IP67 certified, max. 2000 RPM, max. 31.5 dB(A), >150,000 h MTTF.
  • Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency.
  • 12V 2000rpm model (31.5 dB(A)) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 500-2000rpm speed range.
  • High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection.
  • Ruggedised fibre-glass reinforced polyamide construction and IP67 certified water and dust protection.
Check Stock

Wathai EC Brushless Cooling Fan AC 110V 115V 120V 220V 240V Axial Fan Ball Bearing 60mm x 25mm

  • This EC axial fan consume very less power & better efficiency than AC equivalent..
  • Designed for projects that requires cooling or ventilation.
  • or as a replacement fan for various products..
  • Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
  • Package include: 1 Piece fan and mounting screws & nuts.
  • 60 x 60 x 25 mm ( 2.36 x 2.36 x 0.98 in. ) | Rated Voltage :90V to 270V | Airflow: 24.8 ±10%CFM | Power:1.5W | Speed: 4800 RPM.
Check Stock