Top 4degree Drill Guide

Aospun 3 in 1 Dowel Jig Drill Kit, Adjustable Woodworking Drill Locator Hole Punch Tool, Pocket Hole Jig Kit with Locator Clip 8/10/15mm Bits

  • PACKAGE: The Pocket Hole Jig Kit comes with 1×3 in 1 Doweling Jig Drill, 2 x drill bits (8/10mm), 1×15mm hole opener, 1× round dowel positioner( 8mm, 10mm),3x wood dowel pins, 1 x wrench, 1 x allen wrench. 3 in 1 multi-function drill guide , for drilling dowel holes and vertical holes..
  • EXQUISITE CRAFT: The pocket hole jig is precision machined from 6061 high-quality aluminum alloy, and the surface of the drilling guide locator is anodized, which is strong and durable, anti-corrosion and rust-proof, and the product has high hardness and can be used for many years..
  • EASY TO USE: 3 in 1 dowel jig with 8/10/15mm drill bit woodworking pocket drilling jig, easy to adjust drill height and hole depth, easy for anyone to use. Pocket hole connectors are ideal for leg and rail connections, as well as cabinet construction. Insert screws into narrow pinch points..
  • IDEAL ACCESSORIES：Accurately locating and drilling locating holes has never been easier with our innovative Woodworking Drill Guide Locator Fixtures. The exquisitely processed drilling guide kit is designed with a precise scale on its main body, and the scale can be adju....
Check Stock

Kingson 30 45 90 Angled Drill Guide for Cable Railing, Drill Block Guide for Angled and Straight Holes, Drill Jig with Hard Steel Brushings for Installing Deck/Porch/Stair Railings,Handrails

  • Precise 3 Angles: Our cable railing drilling guide fixture can drill 30 °, 45 ° and 90 ° angle holes for your wooden stair railing and deck column. The three angles are fixed and accurate. You can use the impact drill to drill 30 °/45 °/90 ° angle holes on the column or railing, so that you can quickly and accurately complete the drilling work..
  • 4 Different Sizes Holes: There are four drill pilot holes of different sizes at each angle on our fixture, which are respectively 3/8 "(9.52mm), 5/16" (7.93mm), 1/4 "(6.35) mm), and 3/16" (4.76mm). Different sizes are applicable to cable protective sleeves and square head screws of different diameters..
  • High Quality Material: The cable railing drilling fixture is made of high quality aviation aluminum alloy, hard and light, easy to carry, free to store without deformation. The anodized blue surface maintains excellent smoothness, corrosion resistance and full reliable durability. The guide hole of our drill bit guide is equipped with a rigid and strong steel drill sleeve, wear-resistant, durable. No need to worry about the drill sleeve hole becoming larger and losing accuracy..
  • Wide Application: The drilling guide fixture can be used with C-clamp and F-clamp to improve drilling accuracy. It is applicable t....
Check Stock

Multi-Angle Drill Guide Attachment Mobile Drill Stand Portable 45 Degree Adjustable Angle Drill Press Machine Stand Guide Rail Base

  • Adjustable angle drill machine stand is composed of rotatable double guide rods, which can be adjusted to accurately drill holes at an angle of up to....
  • Multi-angle drill guide rod itself has a spring, which can be quickly reset when repeated drilling.
  • A drill guide that can be used in horizontal, vertical or angular position, perfect for straight or angled drilling, drilling on the edge of a board....
  • With 4 screw holes, it is convenient to use as a fixed drill floor with depth limiter, easy to use.
  • Mobile Drill Stand is made of high quality steel and aluminum, strong and durable, high strength, long service life.
Check Stock

CertBuy Portable Drill Press for Hand Drill, Multi-Angle Drill Guide Attachment For 1/4 Inch and 3/8 Inch Adjustable Angle Drill Holder Guide, Portable Drill Guide with Chuck

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

CS Unitec | MABasic 850 Portable Magnetic Drill Press | 1800W 4-speed Benchtop Power Drill Machine w/up to 3-1/16" Diameter & 10" Depth of Cut | Oil Bottle Included

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

Acrux7 Multi-Angle Drill Guide with Chuck, Drill Press Stand, Adjustable Angle Drill Holder Guide, Stand Drill Guide Attachment for 1/4 In and 3/8 In Drills

  • 【Use For】This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
  • 【High-Quality and Durable】Our drill press stand made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • 【Adjustable at 45 Degrees】Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • 【Suitable For】This drill guide fits all 1/4-inch or 3/8-inch drills..
  • 【Drill Guide Sizes】Drill diameter: 42.5mm / 1.6in.
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

Steel DN Mate 45 30 90 Degree Angle 4 Sizes Drill Jig for Angled Holes/Straight Holes, Drill Guide for Cable Railing Lag Screw Wood Post, Durable Aluminum Alloy Drilling Jig for Deck Stair Handrail

  • Aluminum alloy material: This angle drill guide is made of premium quality aluminum alloy, with corrosion resistance and durability, anodized orange surface. It is lightweight, small, easy to use and carry. We enchase the holes with steel protective sleeves, so no worry about it may crack during drilling, causing the guide holes to get broken or inaccurate..
  • Accurate 3 drilling angles: There are 3 different angles in this portable metal drill guide: 30 degree, 45 degree and 90 degree. Building a stair railing becomes much easier and more, convenient with the 30° & 45° angle holes and 90° for horizontal and vertical straight holes.A new beginner can quickly drill accurate 30/45/90 degree angle holes with a electric hand drill in the post with this tool, time-saving and perfect finish..
  • 4 different sizes of holes: This cable railing drill template guide jig offers 4 different size holes, 3/16” (4.76mm), 1/4”(6.35 mm), 5/16”(7.93mm), 3/8”(9.52mm), which are compatible with most cable railing hardware. The hole drilled by 1/4” fits most 1/8″ cable railings lag screws..
  • 4 Application: This drill guides for portable drills is widely use to  install of wooden, and metal deck railing posts for cable railings and DIY woodworking/Handrail proje....
Check Stock

35mm Concealed Hinge Jig Kit,Suitable for Face Frame Cabinet Cupboard Door Hinges,DIY Tools for Cabinet Door Installation,Woodworking Boring Position Locator Tool Kit

  • 【Multi purpose】：NEW 35MM Concealed Hinge Drilling Jig Hole Guide Set DIY Tools. This tool makes the door easy to install, simple to use with any....
  • 【High Precision Drillin】：Suitable for 35mm hinges and also available with 26mm hinges. It comes with a 35mm bit and depth stop. It has function....
  • 【Easy to install and use】：Make cabinet door installation easy! Get drill press accuracy with any hand drill.suitable for your own home....
  • 【High Quality Material】Made of high quality environmental protection metal and engineering plastic, this hinge hole drill guide are durable, which....
  • 【High Accuracy】Reliable drilling with bit guide and stop collar. Make cabinet door installation easy! Get drill press accuracy with hand drill.
Check Stock

Drill Doctor X2 Drill Bit and Knife Sharpener With Removable Guide System

  • MULTI-FUNCTION SHARPENING STATION - Side-by-side sharpening stations and a dual speed motor allow you to quickly resharpen your drill bits or tools with ease.
  • INTERCHANGEABLE GUIDE SYSTEM - The revolutionary interchangeable guide system adapts to your angle needs for knives, scissors, axes, pocket knives, and more! Tool and Garden guide included FREE..
  • WORK SHARP KNIFE & TOOL SHARPENING - The power of Work Sharp. Durable abrasive discs with angled guides allows powerful precision when sharpening kitchen, pocket knives, tools, and more.
  • RESHARPEN YOUR DULL AND BROKEN DRILL BITS – from 3/32-inch to 1/2-inch high-speed steel, masonry, cobalt, & TiN-coated drill bits. Resharpen your twist bits back to a sharp tip and get back to work in minutes..
  • FOURTH GENERATION FAMILY OWNED IN OREGON, USA - All Drill Doctor products are backed by a 3-YEAR WARRANTY from defects due to workmanship or design..
Check Stock

General Tools - FBA_840 840 Pro Doweling Kit

  • Revolving turret accommodates six drill bit sizes.
  • Just lift and turn turret to lock in guide hole.
  • Black oxide guide bars are graduated for fast positioning of hole center points.
Check Stock

CROSS LAP JIG

  • ...s Corner Key Doweling Jig: The Rockler hardwood dowels lets you join mitered corners by running dowels through the joint at 45°! Our corner key dowel jig’s exposed oval dowel end result is a unique decorative effect, and the dowels serve to strengthen the joint, much like splines..
  • Create Solid Wood Dowels: This drill jig for straight holes allows you to use solid wood dowels in a contrasting species, non-ferrous metal tubes, a combination of both, or even tie the joint together with leather laces. More advanced decorative effects can be achieved with our dowel joiner by double-drilling to create dowels with a multi-layered core..
  • Decorative Mitered Joints: This wood joiner jig creates beautiful, decorative mitered joints, and also strengthen mitered corners on boxes, drawers and more. Once set, the wood doweling hole drill guide tool can be easily moved and re-clamped to drill the next hole (clamps sold separately)..
  • Molded Reference Lines for Accuracy: The Rockler dowel jig has precisely molded reference lines and clear alignment window for fast, accurate setups. No other dowel drilling jig on the market offers the same functionality, repeatability, and convenience. Extended length bits are required..
  • Wooden Dowel Jig Includes: Our wood doweling jig....
Check Stock