Top 5 inch Center Hole

Ravinte 30 Pack 5 Inch Kitchen Cabinet Handles Matte Black Cabinet Pulls Black Drawer Pulls Kitchen Cabinet Hardware Kitchen Handles for Cabinets Cupboard Handles Drawer Handles

  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund..
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 5 inches. Installing new cabinet handles, drill two holes with center to center spacing of 5 inches..
  • DURABLE & STRONG: 30 bar pulls made of stainless steel finished with classic matte black coordinates well with other appliances and accessoriess..
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles..
  • Size of cabinet hardware: Screw-hole center: 5 inch(128mm)..
Check Stock

Dynabrade 50303 4-1/2-Inch-5 Inch Vertical Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Vertical, 12 hp, Side Exhaust, 12,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 8.25"W x 6.75"H.
Check Stock

Meyer 2 PK Diamond Hydra-Flush Universal Flushing and Storage Fluid Petroleum Oil 15901

  • Ideal for push/pull applications found in off-highway construction mining and other industries where heavy equipment is maintained.
  • Center hole permits extending screws cables straight through the ram for versatility of application.
  • Chrome-plated piston rods resist wear and superior packing and seals provide high cycle life without leakage.
  • 10-Ton capacity 2-1/2 inch stroke and a 49/64 inch center hole diameter.
  • Retracted height is 5-5/16 inches and the extended height is 7-13/16 inches.
Check Stock

Tumbler Holder SourceTon Set of 2 Tumbler Holder Handle compatible with 30 OZ YETI Rtic OZARK TRAIL SIC Cup Ozark Trail Berg SIC Chillr Kodiak Boss Tumbler Mug

  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full....
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 5 inches. Installing new cabinet....
  • Size of cabinet hardware: Overall Length: 5-1/2 inch.
  • Durable design& fine touch: With advanced technique, the drawer pulls is made to be long lasting, accompanied with good looking and fine touch..
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean....
Check Stock

Dynabrade 50340 4-1/2-Inch-5 Inch Pistol Grip Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Pistol Grip, 7 hp, Rear Exhaust, 11,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (Wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.0"L x 8.25"W x 6.75"H.
Check Stock

homdiy 30Pack 5in Brushed Nickel Cabinet Pulls Kitchen Cabinet Handles Modern Drawer Pulls Stainless Steel Pulls fo Kitchen Cabinets, 5in Hole Centers Handle Pulls

  • 2-YEAR Guarantee: As a professional seller, homdiy focus on customer satisfaction, we will replace them or give you a full refund if there are any quality problems in 730 DAYS from the date of purchased..
  • Easy To Install: 5 inch Center to Center with 5.5 in Overall Length. Please measure your cabinet HOLE CENTERS is 5in before you purchase cabinet handles..
  • Material: homdiy cabinet pulls made of high quality stainless steel with brushed brass finished which protect handles from rusty. Well-made threads keep handles stable and easy to install..
  • Simple But Classic: This brushed nickel cabinet pulls are simple but depending on your application, can be very key in bringing the design together..
  • Measurements:Hole Centers: 5 inch (128mm), overall length:5-1/2 inch (140mm), width: 1/2 inch(12mm), height: 1-2/5 inch (35mm). Please make sure the hole spacing of cabinet before purchase drawer handles..
Check Stock

CURT 25328 Channel-Mount Adjustable Trailer Coupler, 2-5/16-Inch Hitch Ball, 15,000 lbs

  • 2 5/16 inch X 3 inch Bolt On Tongue Dacromet Coated Coupler Hitch.
  • If you have any questions about part numbers and models - please contact with us.
Check Stock

Mayhew Pro 24004 5/8-Inch Center Punch Black

  • Sturdy material: the automatic center punch is made of solid and durable brass, come with deep knurling on the surface, which helps offer more accurate handling and control by one hand.
  • Package includes: you will receive 4 pieces automatic center punches in the package with 2 different colors, each color has 2 pieces, as picture shown, you can use or replace them for a long time.
  • Repeatable impact: 5 inch spring loaded automatic center hole punch can mark a dimpled starting point, the red adjustable impact cap is made of ABS plastic, can be increased or decreased striking force, the good spring can support repeatable impact.
  • Broad use: automatic center hole punch is suitable for a variety of tasks, ideal use for marking, punching, pricking and scribing on wood, metal, glass, plastic, leather or wall surface and so on.
  • Using steps: mark the center of the hole you want to make, and press the handle firmly, the strong spring will pop up the punch strongly, after the punch is pressed back into the rod for a short time, it will leave a mark of the hole on the item.
Check Stock

Ravinte 10 Pack 4 Inch Kitchen Square Cabinet Handles Matte Black Cabinet Pulls Black Drawer Pulls Kitchen Cabinet Hardware Kitchen Handles

  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund..
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 4 inches(102mm). Installing new cabinet handles, drill two holes with center to center spacing of 4 inches(102mm)..
  • DURABLE & STRONG: 10 bar pulls made of stainless steel finished with classic matte black coordinates well with other appliances and accessoriess..
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles..
  • [MEASUREMENT] - Overall Length: 4-1/2 inch(114mm).
Check Stock

YOXUFA 60 Tooth #35 Chain Rear Sprocket 4 Hole with Connect Master Link for Predator 79cc 212cc 420cc 6.5hp 13hp Engine Mini Bike Go Cart Kart Drift Trike ATV Heavy Duty Parts

  • For Predator 79cc 212cc 420cc 6.5hp 13hp Engine Mini Bike Go Cart Kart Drift Trike ATV.
  • Size :#35 60 Tooth Rear Sprocket. Overall Diameter: 185mm (7.28 inch), Center Hole Diameter : 50.5mm (1.98 inch), Mounting Hole Diameter : 10mm (0.39 inch), Mounting Hole Distance (center to center, bolt hole circle): 51.5mm (2.02 inch)..
  • Professional after-sales: Please check the description to confirm the compatibility before purchase..
  • Package Include: 1 X Rear Sprocket, 1 X Set of Mounting Screws, 5 X #35 Master Link, 4 X Screw.
  • All of our parts are specially designed to exact standards, manufactured and tested to help deliver optimum performance.
Check Stock

Igloo Cooler Plastic Hinges for Ice Chests Set of 3

  • Made by Igloo. Fits Igloo 25-165 Qt rectangular-shaped, hinged coolers..
  • Igloo cooler parts contain UV inhibitors to protect against sun damage and breakdown, and are rugged and durable for a long cooler life. Living hinge....
  • Width from center hole to center hole: 1-13/16". Height center hole to center hole: 5/8"..
  • 3 Igloo plastic hinges and 12 Igloo stainless screws included..
Check Stock

Ravinte 5 Pack 5 Inch Cabinet Pulls Brushed Brass Stainless Steel Kitchen Drawer Pulls Cabinet Handles with Drill Mounting Template 5”Length, 3” Hole Center

  • Risk-free 100 Days trail: We’re confident you ‘ll love your Ravinte handles,So we give you 100 days to try it on us or pick it up and give you a full refund..
  • If you’re replacing your handle, measure and ensure the center to center hole spacing of the current handle is 3 inch(76mm). Installing new cabinet handles, drill two holes with center to center spacing of 3 inch(76mm)..
  • Easy installation: The brushed brass cabinet pulls come with a set of mounting templates (a door template, drawer template, and drill bit). Measure the hole center of the handle before you start the installation. Align the template and mark the door or drawer. Then drill the holes you marked. You could install the black hardware for cabinets easily. Each cabinet pull includes 2 short screws in 1” and 2 long screws in 1.57” for your convenience..
  • These functional ,elegant & modern brushed brass pulls widely compatible suitable for different styles of cabinets, wardrobe, wine cabine,chest and cupboard.The euro-style cabinets pull is an ideal way to beautify an entire room. Make cabinet hardware a part of your home décor today. Includes screws for your convenience..
  • [MEASUREMENT]: Hole centers(CC):3 inch(76mm), Total Length:5 inch(127mm), Diameter:1/2 inch(12mm) Projection:....
Check Stock