Top 57mm Stepper Motor

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

• Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
• Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
• Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
• Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
• 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..

SainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO

• This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
• Software: GRBL controller, UniversalGcodeSender..
• Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
• Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..

Twotrees Nema17 Stepper Motor 4 Lead Stepper Motor Nema 17 Motor with 1m Cable 42BYGH 38MM 1.5A 17HS4401S for CNC XYZ 3D Printer

• High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance....
• Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably....
• Wide Application: This small stepper motors can be used in various area, such as 3D printer.
• Excellent Service : CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality....
• What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17....

STEPPERONLINE 5:1 Planetary Gearbox Nema 17 Stepper Motor 1.68A for DIY CNC Robot 3D Printer

• Bipolar Stepper, Holding Torque: 1.68 Nm , Rated Current/phase : 1.68A , Recommended Voltage: 12-24V.
• Frame Size: 42 x 42 mm/ 1.65" x 1.65" , Motor Length: 40 mm / 1.57" , Gearbox Length :27.3 mm / 1.07".
• 4-wires (Black, Green, Blue, Red) , Weight: 460g.

Befenybay 50mm Effective Travel Length Mini Linear Rail Guide Lead Screw T6x1 with NEMA11 Stepper Motor for DIY CNC Router Parts X Y Z Linear Stage Actuator

• DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V..
• MAXIMUM LINEAR SPEED: The maximum linear speed of lead screw worm drive stepper motor is 25mm per second..
• APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc..
• PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller..
• NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power..

Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

• 【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire..
• 【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on..
• 【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current..
• 【4】The largest 32 divisions of the 6 models are optional.
• Suitable for 4 wires, 6 wires and 8 wires stepper motor..
• 【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion..

3Set Aluminum Nema23 Stepper Motor Mount Bracket Holder Clamp Support Block+12pcs Installation Screw for CNC Router Engraving Milling Machine …

Nema23 Stepper Motor Mount Base 57 Stepping Motor Bracket Clamp Support Holder with 4pcs Installation Screws Aluminium Oxide for CNC Router Machine

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

• Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
• Input voltage: 12-24VDC .CNC Router Machine Controller board.
• Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
• support 775 motor, 200W/300W/500W spindle.
• support dual Y-axis use, three-axis and two-axis switching use.
• support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
• Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
• Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
• Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..

Easycargo 40mm Heatsink Kit 40x40x11mm + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink for Cooling 3D Printer, TEC1-12706 Thermoelectric Peltier 40mmx40mmx11mm (Black, 4)

• Pre-applied 3M 8810 thermal conductive double side adhesive tape backing.
• Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc..
• Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x11mm (L*W*H).

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

• Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
• Input voltage: 12-24VDC .CNC Router Machine Controller board.
• Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
• support 775 motor, 200W/300W/500W spindle.
• support dual Y-axis use, three-axis and two-axis switching use.
• support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
• Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
• Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
• Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..

Planetary Gearbox Nema 23 Ratio 10:1 Gear Head Speed Reducer 1/4\ Input fit for 6.35mm Shaft Stepper Motor CNC Router Lathe DIY(10:1)

• ★Input shaft hole is 1/4" that can match the 6.35mm shaft motor (without key). The output shaft diameter is 14mm.
• ★The gear head has Nema 23 Input & output flange,suitable for flange 57mm stepper motor and other motors which can completely match the installation size ..
• ★Rated speed is 3000RPM, 10:1 gear ratio ,the rated holding torque is 15N.m and the Max. holding torque is 25N.m.
• ★4pcs screws provide for installation , small size gearbox , very convenient for the machine which has limited space for a gearbox..
• ★Widely used on kinds of machine , lathe ,engraving machine etc..