Top 5w Rf Module

Spectrum Analyzer USB 35-4400M Signal Source RF Frequency Domain Black Analysis Tool with Tracking Source Module Industrial Supplies

  • RF Frequency Domain Analysis Tool. Sweep Bandwidth: 33mHz---4400mHz.
  • Turn on the tracking source output bandwidth 33mhz---3000mhz.
  • Made of fine quality material, the Spectrum Analyzer has a long service life. Small and portable, high accuracy.
  • Signal Source Spectrum Analyzer. Software used on the computer side: NWT4.11.09 version.
  • Computer operating system: Winxp, Win7, Win10.
  • 35-4400M Signal Tracking Source Module is an RF frequency domain analysis tool.
  • Signal Tracking Source Module with Shell. Sweep Step: ≥33-68.75mHz/125Hz, 68.75-137.5mHz/250Hz, 137.5-275mHz/500Hz, 275-550mHz/1kHz,....
Check Stock

CHENLAN Original Wireless RF Module PCB Board Power On/Off Circuit Board Replacement Part for Microsoft Xbox One Console

  • Original Wireless RF Module PCB Board Power On / Off Circuit Board.
  • Compatible with XBOX One console ONLY, NOT FIT for Xbox One Slim or Xbox One X consoles..
  • Please Double Check the Model Number of Your Device in Case of Wrong Part Ordered.
  • Perfect replacement part for faulty/broken/damage or worn out RF Module Board.No need for or Soldering connection cables. Just plug the proprietary connector into the motherboard, and screw into place..
  • Please Replace This Part Under Professional Guide(You can watch some tutorial video on YouTube)Please Make Sure No Man-Made Damage or Scratch when Returning.
Check Stock

RF Coax to HDMI DVI Demodulator Analog UHF VHF CATV Tuner for NTSC System

  • Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs. Supports all coax signals coming from cable....
  • Professional grade agile RF coax demodulator for converting the RF coax cable TV. External add-on TV tuner module for LCD TV, HD monitor/projector....
  • Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details. [Note]: This is an analog TV tuner so....
  • Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote....
  • Automatic video/audio gain control for compensating the input signal level variation for the best broadcast quality performance. Supports last channel....
Check Stock

Dpg-200 Vacuum Transducer with

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

LORAWAN SX1262 LoRa TCXO Wireless Transceiver E22-900M22S SPI 868MHz SMD 915MHz SMD ebyte Transmitter Receiver rf Module

  • 【Practical】The large heat dissipation area can increase the continuous working time. High working frequency, increases the scope of application, strong practicality.
  • 【Brand New】100% brand new high quality right RF switch board, strictly full tested to ensure the best quality before shipment, safe to use.
  • 【High Quality】The RF switch module replacement is made of PCB material, corrosion‑resistant, anti‑oxidation, increased service life. Advanced manufacturing technology, high reliability and stable performance.
  • 【Easy Installation】The RD switch module is easy to install and convenient to use, can directly replacement for the old or broken one.
  • 【Note】For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, wish you a happy life.
Check Stock

AllAboutAdapters Composite RCA S-Video RF to HDMI VGA Converter Switcher

  • Decoding RF coax signals from cable outlet, satellite box, RF modulator or CCTV surveillance camera system to digital HDMI signal or sharp VGA pixels for display. 4 selectable video inputs: RF/Coax, RCA A/V, S-Video and VGA pass through..
  • Analog TV tuner and RF to VGA demodulator for all NTSC, PAL B/G and PAL D/K system. Easy add-on TV tuner module for all VGA-based monitor or projector without RF TV input..
  • 2 selectable VGA and HDMI output formats. Excellent video to HDMI + VGA converter for converting interlaced video into HDMI or progressive VGA type for great video clarity and sharpness..
  • Selectable 13-level HDMI and VGA output resolutions with maximum output up to 1080p HDMI or 1920 x 1200 VGA pixels. Supports Picture-In-Picture function for watching cable TV or video from a sub-window while the compute takes the main screen..
  • PIP TV video sub-window can be resized from 1/16, 1/9, 1/4 screen or full screen display. PIP window screen location can be re-positioned among 5 preset locations, upper left corner, upper right corner, center, lower left corner and lower right corner..
Check Stock

11J28-06881 - Upgraded Replacement for Beacon-Morris Direct Spark Ignition Control Board

  • The Honeywell Home PROTAKEOVER is a module add-on for the Honeywell Home PROA7PLUS Alarm Panel. By installing this module, your PROA7PLUS will be able to support one of several legacy RF sensor lineups. You can pick between Honeywell 5800, 2GIG 345 MHz, 433 MHz, 319.5 MHz, and Bosch Sensors..
  • Once the PROTAKEOVER Module has been installed, it will replace the existing back plate for the PROA7PLUS Panel. The PROTAKEOVER serves as the back plate, as it also provides an antenna for communicating with the legacy sensors..
Check Stock

KOOBOOK 2Pcs Voice Playback Module MP3 Trigger Player Board SD/TF Card for Arduino

  • Smart voice module,integrated IO trigger, UART protocol control, One_line single-bus protocol control..
  • Standard MP3 and other 7 operating modes setting by DIP switch..
  • Speaker by a 5W class D audio amplifier on board..
  • Support TF card for maximum 32G downloading music files directly by micro USB connector..
Check Stock

Smart RF Relay Switch eMylo Wireless Remote Control Switch DC 12V One Channel Momentary Module 433Mhz Relay Receiver with Two Transmitters

  • ♥ RF Remote Control Switch: lamps or other household electric appliances are controllable using the remote control, which features long control distance, sensitivity, high anti-interference performance and stability..
  • ♥Excellent stability--The relay module provides high signal sensitivity at lower cost and resist interference.
  • ♥Strong signal--eMylo RF relay switch can pass through walls, floors and doors, control receiver from any place within a reliable distance.
  • ♥ More Flexibility & Widely Application: eMylo RF Relay Switch adopts non-directional wireless encoding technology, allowing independent control without mutual interference, can be used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc..
  • ♥Easy to set up:The programmable RF receiver and transmitter can be flexibly configured in quantity and in operating modes..
Check Stock

Marker (Radio Vrs. With Melody)

  • ...ight applications: interior light, dome light, map light, tail box light, side marker light, back up light, parking light, door light, turn signal light, tail light, license plate light, etc..
  • ⭐Common use for car, truck, motorcycle, scooter, trailer, RV, boat.with DC12V voltage. Fitment: Replacement LED bulb for: W5W 194 147 152 158 159 161 168 184 192 193 259 280 285 447 464 555 558 585 655 656 657 1250 1251 1252 2450 2652 2921 2825 921 906 579 and others..
  • ⭐The distance between the RF remote control with bulbs can reaches 12-30 meters.?No need pointing the RF remote control to bulbs and control all bulbs in within control.?Can control bulbs in the vehicle..
  • ⭐LED Chips Type: 3535 SMD, Chips QTY: 4 pcs/Bulb, Color: RGB 13colors, Voltage: DC 12V, Wattage: 6W/Pair, 3W/Bulb, Output: 0.25A/Bulb, Size: 1.5inx 0.43inx 0.45in (38mmx 11mmx 9mm), Lifetime: More than 30000 hours, Package: 4 pcs bulbs & 2 pcs RF remote.
Check Stock

Power Eject Bind RF IR LED Light Bluetooth Board Module Replacement Part for Microsoft Xbox One S Slim

  • Power Eject Bind RF IR LED Light Bluetooth Board Module Replacement Part for Microsoft Xbox One slim.
  • Tips: This is replacement to replace your old damage Power Eject Bind RF IR LED Light Bluetooth Board, don't include instructions, please install it....
  • Broken your Power Eject Bind RF IR LED Light Bluetooth Board ? don't need to change new device, just buy this item and replace your damage Power Eject....
  • Compatible with: Microsoft Xbox One Slim (Please check your model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

2902832, Frequency transducer, F Input: 0.002Hz-20kHz, Out: V/I, Screw Conn, Mini MCR-SL-F-UI-NC

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler detection in imaging.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
Check Stock