Top 6 In 1 Meter

Fieldpiece ANC1 Deluxe Nylon Meter Case

  • Fieldpiece Meter 4 Pocket Case has 4 pockets.
Check Stock

PH Meter, TDS PPM Meter, Soild PH Tester[Upgraded Version], 3 in 1 for Home Water and Garden Soil Use

  • [Package]: - 1 PH Meter(yellow) +1 TDS & EC Meter (white)+1soil tester kit (green). Total is 3 PCS..
  • [Functions]: - The digital PH meter is equipped with Temperature detector and PH tester function. TDS meter can tester water purity level, which show on the screen in PPM (parts per million). The soil meter can test the pH,light, moisture of soil, to help grow your plant more easy..
  • [Quick and accurate]: - th ph and tds tester can test quickly and accurately within ±0.02. It only takes a few seconds to show accurate data on the screen..
  • [Easy to use]: - ph tester and tds meter have sensitive electrode sensor ,simply press "ON". It only takes a few seconds for your result to appear the data on screen. Soil test kit just need to insert the probes into the soil about 4-6 inches, and wait for about 10 mins to read the accurate data..
  • [Widely use]: - These meters are designed small and convenient. PH meter and can test pH balance,TDS meter can test water ppm ideal for testing drinking water, swimming pools, hydroponics, and more. Soil tester is applicable to plants, garden, lawn and farm.(Kindly note: Please clean and dry the probe with clean water after each use, as any water or matter left on the probe will affect the accuracy of the next test).
Check Stock

Professional Ketone Breath Analyzer Portable Digital Ketosis Breath Tester with 10 Mouthpieces for Ketosis Testing

  • The ketosis breath analyzer needs to be exhausted before your first use. To do this, turn on the ketone breath meter, wait for the 20 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow immediately within first 5-6 seconds when displaying “blo” on the ketosis tester, since the ketone breath tester starts analyzing the breath right after the first 6 seconds.
  • This ketone breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Keto breath meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5-6 seconds.
  • Ketosis breath meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. Ketone breath meter with 3 LED indications: Green Light (Ketosis Reading Successfully), Amber Light (Low Battery), Red Light (Ketosis Reading Unsuccessfully).
  • Cautions before measurement: Be cautious about factors that may affect your results because the device is with high sensitivity ....
Check Stock

Ketosis Breath Meter Ketone Meter Professional Digital Ketone Breath Analyzer with 10 Mouthpieces for Personal Use

  • The ketosis breath analyzer to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once “START” showing then Ketone Breath meter will start analyzing your breath, the result readings will be visible for 10 seconds.
  • This keto Breath analyzer is an easy-using and self-monitoring device for individuals following on a keto life. Ketone breath meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5 seconds.
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat bu....
Check Stock

Ketosis Breath Analyzer Ketosis Breath Meter Portable Ketone Meter Kit with 10 Mouthpieces

  • The ketone monitor needs to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once "START" showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visible for 10 seconds.
  • Breath acetone meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. 4 LCD Display colors for indications: 0.0-1.9 reading with WHITE light, 2.0-39 readings with GREEN, 40-59 readings with YELLOW and over 60 readings with RED light. This ketone analyzer is with 32 memory records for ketosis records tracking, and this device is powered by 2*AAA batteries (not included but commonly available).
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fuel becau....
Check Stock

AD8317 1M-10GHz 60dB RF Power Meter Logarithmic RF Signal Power Detector Controller for Amplifier

  • EASY TO USE :The logarithmic power meter adopts AD8317 chip design, which is convenient to use, small in size, high in efficiency, easy to install, stable and reliable, and is used for radio frequency signal power detection..
  • DETECTABLE :The logarithmic power meter has strict quality control and quality assurance. It can detect the power of the radio frequency signal from -55dBm to 0dBm, and convert the radio frequency signal into a DC voltage output..
  • DYNAMIC RANGE :The greater the amplitude or power of the radio frequency signal, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, thereby expanding the dynamic range of the detection signal to 55dB..
  • WIDELY USED :The logarithmic power meter adopts advanced technology and exquisite craftsmanship, and has been improved to improve durability. Logarithmic detector can be widely used in radio frequency signal detection, signal power measurement, and environmental field strength detection..
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

Ketone Breath Analyzer Professional Breath Ketosis Meter Portable Digital Ketone Meter Tracing Ketosis Status

  • This ketosis Breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Breath ketosis meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5 seconds.
  • Breath ketone meter measures 6 levels of ketones up to 99 PPM (0.0 -99), using a PPM (Part Per Million) measurement. 4 LCD Display colors for indications: 0.0-1.9 reading with WHITE light, 2.0-39 readings with GREEN, 40-59 readings with YELLOW and over 60 readings with RED light. This ketone analyzer is with 32 memory records for ketosis records tracking, and this device is powered by 2*AAA batteries (not included but commonly available).
  • The ketone breath analyzer to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once “START” showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visi....
Check Stock

DollaTek 5Pcs SW-420 NC Type Vibration Sensor Module Vibration Switch

  • Shipping list: 1 channel 24V vibration sensor plus relay module with 1 meter long shock sensor.
  • 6-24V wide voltage power supply stable version With 1 meter long vibration sensor module, this module has no vibration delay function..
Check Stock

LED Magnetic Field Detector Ghost Hunting Paranormal Equipment Tester Portable Counter (Black, 1 PC)

  • ✅ BLOCKS SMART METER EMF RADIATION - The Smart Meter Cloak uses faraday technology to block RF (radio frequency) emsissions, specifically harmful EMF (electromagnetic field) radiation, coming from electricity meters referred to as smart meters. Placing the Smart Meter Cloak over a smart meter absorbs the EMF waves and prevents the emissions from going inside your house, office, or building..
  • ✅ INNOVATIVE DESIGN + HIGH-QUALITY STAINLESS STEEL FRAME & LID - Constructed with a high-grade double layer of 1/6" stainless steel mesh welded to a reinforced stainless steel frame, offering extreme support and shielding abilities. Stainless steel lid has two latches and faraday compression gaskets for a tight and secure RF shielding seal. When needed, a technician can open the lid and view the smart meter screen through the top layer mesh, so the Smart Meter Cloak never needs to be removed..
  • ✅ UNIVERSAL SIZE - Fits all round smart meters in the United States and Canada. The design allows for modifications to be made, should there be elements protruding on your smart meter rim, or if a tighter fit is required. The kit includes weather-proof foam strips in two sizes that can be used to line the rim of the Smart Meter Cloak, to accommodate various size meters.....
Check Stock

Ketone Breath Meter Ketosis Breath Analyzer Portable Ketone Meter for Ketosis Testing

  • This ketosis breath meter is an easy-using and self-monitoring device for individuals following on a keto life. Ketone breath meter saves you from finger pricks, and the device can be used repeatedly by replacing the mouthpiece, which saves your money for testing from continiously buying strips, also more convenient because you only need to breathe with the monitor for 5 seconds.
  • The ketone breath meter needs to be exhausted before your first use. To do this, turn on the Keto Breath Meter, wait for the 15 seconds countdown to be completed, and turn it off. Repeat the same procedure 1-2 times (without blowing) before you proceed to your first test. During testing, please blow for 5-6 seconds immediately once "START" showing then Ketone Breath analyzer will start analyzing your breath, the result readings will be visible for 10 seconds.
  • Breath ketone meter detects your breath acetone from 0 to 99 PPM and follow 6 level guidance: 0.0-1.9ppm (No ketosis), 2.0-3.9ppm (Early Stage Ketosis), 4.0-9.9ppm (Light Ketosis), 10-39ppm (Stable Fat Burning Zone), 40-59ppm (Caution-High Ketosis), 60-99ppm (Ketoacidosis).
  • Tracking breath acetone is a better measure of what your body is actually using for fuel because acetone in our breath is an actual byproduct of fat b....
Check Stock

DHDZVOV Water Tester for Plants Soil Moisture Meter,3-in-1 Soil pH Moisture Light Intensity Meter Soil Sensor Kits,Soil pH Meter for Garden,Farm,Lawn,Indoor & Outdoor Plants Growth (Soil Meter Kit)

  • 3-in-1 Soil moisture meter helps determine water and PH levels in soil,Soil meter helps determine if your plant is receiving adequate sunlight.
  • Environmentally friendly design works without batteries or charging the soil moisture tester.
  • Easy to use the soil pH meter, simply place prongs in soil, switch button to desired function,and check reading.
  • Soil tester moisture range: 1-10( 1-3 dry, 4-7 neutral, 8-10 wet),pH range: 3.5-8( 3.5-6.5 acidic,7 neutral,7-8 alkaline),light intensity range:0-2000lux(0-200 Lower,200-500 low,500 -1000 neutral,1000-2000 high).
  • Take the guesswork out of caring for your plants and try our 3-in-1 Plant Soil Moisture Meter today.
Check Stock