Top 6 Layer Pcb

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current ....
Check Stock

YMDK GK61x GK61xs GK64x GK64xs Anodized Aluminum CNC Case (Only Aluminum Case)

  • Package Included: CNC Case + Rubber Feet + Screws.
  • New GK61x GK61xs GK64x GK64xs plate and PCB can install in directly..
  • Old GK61 GK64 plate can't use since the size is bigger than normal 60 case.You can just replace a GH60 size customized plate is ok.The plate need to be compatible with GK61 PCB..
  • How to judge old and new edition: Old GK61 GK64 PCB is white and only support single 6.25u space New GK61x GK61xs GK64x GK64xs PCB is black and can support split space and single space at the same time..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.If little keys not working,check the switch pin whether it's bent at first.Especially Kailh switches.
Check Stock

Ducky One 3 Mini Daybreak Keyboard (Cherry MX Clear)

  • Featuring Ducky's all new QUACK Mechanics design philosophy.
  • Dual layer Hot-swap PCB w/ exclusive Kailh yellow hotswap sockets.
  • Low profile One 3 case design in a wide array of exclusive color options.
  • Equipped with dual-layer high-grade silicone and EVA foam sound dampeners.
Check Stock

Ducky One 3 Matcha TKL Keyboard (Cherry MX Red)

  • Featuring Ducky's all new QUACK Mechanics design philosophy.
  • Dual layer Hot-swap PCB w/ exclusive Kailh yellow hotswap sockets.
  • Low profile One 3 case design in a wide array of exclusive color options.
  • Equipped with dual-layer high-grade silicone and EVA foam sound dampeners.
Check Stock

The Warhol Incident (Alexis Parker Book 2)

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

YIMAGUJRX RUNJRX Keyboard Switch Pads Poron Foam for 61/64/87/100/104/108 Hot Swap Keyboard 120Pcs

  • 【FUNCTION】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds..
  • 【CHARACTERISTICS】We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【SET MATCHING】You can place the Keyboard switch pads directly on the PCB with tweezers without disassembling the keyboard..
  • 【MATERIAL】Made of 0.5mm thick Poron high-density memory foam..
  • 【PACKAGE INCLUDES】Keyboard switch pads*120 x 1 , Tweezers x 1..
Check Stock

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

  • This is Gateron PCB Mount Screw In Crystal Stabilizer，.
  • Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
  • The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
  • If your keyboard is 96 or 104 108 layout,need to buy 2 set.
  • This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
Check Stock

Ducky One 3 Matcha Full-Size Keyboard (Cherry MX Silver)

  • Featuring Ducky's all new QUACK Mechanics design philosophy.
  • Dual layer Hot-swap PCB w/ exclusive Kailh yellow hotswap sockets.
  • Low profile One 3 case design in a wide array of exclusive color options.
  • Equipped with dual-layer high-grade silicone and EVA foam sound dampeners.
Check Stock

EVGA SR-3 Dark, LGA 3647, Intel C622, SATA 6Gb/s, USB 3.1, M.2, U.2, EATX, Intel Motherboardx, 160-CX-W999-KR

  • Intel C622 Chipset, Supports Intel Xeon W-3175X, Cascade Lake-SP, and Skylake-SP for the LGA3647 socket.
  • E-ATX Form Factor, 16 Layer PCB, 24 Phase PWM, Supports 4-Way SLI.
  • 6 DIMM Hexa-Channel up to 192GB 4000+ MHz (OC), 10 USB 3. 1 Gen1, 2 USB 3. 1 Gen2 Ports (1x Type A, 1x Type C).
  • 6 SATA 6Gb/s, 4 sSATA 6Gb/s via mini-SAS port, 2x M. 2 Key-M 110mm, 2x U. 2 NVMe Port, 2x Intel 10GbE NIC, 1x Intel Gigabit NIC.
  • Supports the new EVGA ELEET X1 Tuning Software + EVGA's Top-Notch Technical Support.
Check Stock

GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.This is DIY kit,after you....
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some....
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to....
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering....
Check Stock

Ducky One 3 Mini Classic Hotswap 60% RGB Mechanical Keyboard (Cherry MX Red)

  • Featuring Ducky's all new QUACK Mechanics design philosophy.
  • Dual layer Hot-swap PCB w/ exclusive Kailh yellow hotswap sockets.
  • Low profile One 3 case design in a wide array of exclusive color options.
  • Equipped with dual-layer high-grade silicone and EVA foam sound dampeners.
Check Stock