Top 6 flute Reamer - BuyWiseBest.com

ADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET

Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..

Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
Size Infor: Length of chucking reamer is 6.5 inch.
Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.

The reamer range is 15/32 inch to 1-1/2 inch..
Product includes 11Pcs high speed adjustable hand reamers H4-H14..
The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
Adjustable reamer is straight flute with straight handle..
The reamer is suitable for drilling machines and other machine..

【High-speed Steel Tool】- Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
【Hand Reamer】- Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
【Application】- Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
5/16" shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
7/16" shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
9/16" shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
3/4 " shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
3/4 " shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
9/16" shank diameter, For Reaming abrasive material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
Morse taper shank #2, For Reaming Abrasive Material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..