Top 6 jaw Manually Operated Chucks

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock

13 PCS Metric M35 Cobalt Steel Twist Drill Bit Set HSS Extremely Heat Resistant with Straight Shank to Cut Through Hard Metals Like A Hot Knife Through Butter,Such as Stainless Steel,Titanium Alloy

  • ✅ Faster Cutting and Longer Life— Our Twist Drill Bit HSS are Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to 12 times when compared with an average HSS drill bit..
  • ✅ No Center Punch Is Needed—The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Twist drill bit kit Will not "walk" or "wander".
  • ✅ Extremely Heat Resistant — twist drill bits Must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
  • ✅ Metal Cutting — Drilling Steel, Stainless Steel, Hard Metal and Iron.Particularly successful in cutting through hard metals such as hard metal ,stainless steel and cast iron, although they can be used for softer materials, too.
  • ✅ Easy Usage And Store —The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm,13Pcs Packed in a Plastic Bag For Easy Usage And Store.
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...,Rotary diameter of tool rest is 5.51"(140mm),Spindle bore is 1.50"(38mm),Diameter of chuck is 4.92"(125mm),Width of lathe bed is 3.94"(100mm),Thread standard:Metric/imperial/customized.❥This lathe is capable of adjusting set screws for accurate operation..
  • ⚙【High Precision Operation】High Precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, we also offer optional four-jaw chucks.In the X axis direction can be automatic feed,Automatic feed speed can be adjusted,Automatic feed range reached 0.01mm-0.4mm.❥The tailstock is movable and fixed with a maximum center distance of 31.5 inch at the far right.With the MT2 taper in tailstock spindle..
  • ⚙【Variable Speed】The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automatic start, delay automatic start.❥Indexing function: you can switch the direction of turning tool through "DIR" button.❥Angles can be cleared with one click....
Check Stock

3-Pack Keyless Chuck 1/32 to 1/8 Replacement 4486 Drill Keyless Bit Chuck Shank Rotary Tool Quick Change Adapter Kit Compatible for Dremel 4486 Model 395 3000 4000 4300 8220 3000 7300 Multipro

  • Quick change keyless chucks holds various accessories with 1/32” to 1/8” shank sizes. Pay attention to measure the contrast size before buying.....
  • 3-jaw chuck compatible for all Dremel cordless and corded rotary tools(including drill bits, sanding drums, polishing wheels and other light-duty....
  • One-piece structure design, alloy material, sturdy and durable, more safer than plastic models. The 3-jaw chuck is well-made, and the built-in spring....
  • This replacement keyless chuck provides a big improvement in precision and holds these tiny bits far more securely and in better alignment with the....
  • Package content: 3 x multipro shank rotary tool accessories keyless chuck..
Check Stock

1/2\ Annular Cutter Round Shank 3/4\ Adapter for Gunsmithing Drilling and Milling Machines to Reduce Barrel OD (Outer Diameter)

  • 1/2” 3-flat to 3/4 Female, for use in 3 Jaw Drill Chucks.
  • Will hold any cutter with a 3/4 inch shank.
  • [Overall Length: 3 inches] [Shaft Length: 1.250 inches] [Shaft Diameter: .375 inches] [Inner Diameter: .752 inches] [Inner Diameter Depth: 1.325].
Check Stock

Keyless Drill Chuck Extra80-RV13, Röhm 1328310, 1/2\-20 Mount, 1/16\-1/2\ Capacity with Retaining Ring, Trough-Hole, Metal

  • Carbide Tipped Jaws for Super Strong Grip.
  • For Normal and Rotary Hammer Drills, without Spindle Stop.
  • Radial Locking for Clockwise and Counter Clockwise.
  • Replaces Milwaukee Drill Chucks 42-66-0755.
Check Stock

AUTOTOOLHOME 1/4-inch Hex Shank Keyless Drill Chuck Quick Change Adapter Power Screwdriver to Drill Converter Conversion Conversion Tool

  • Instantly convert impact driver to hold non-quick change drill & driver bits.
  • Keyless chuck finger-tightens for easy bit changes.
  • Precision three jaws,tightly well,capacity: 0.02" (0.5 mm) to 0.3" (8 mm).
  • Quick-change hex shank for instant swaps.
  • Fits all chucks, 1/4" impact drivers, & quick-change adapters.
Check Stock

Hymnorq Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron

  • ... NO CENTER PUNCH NEEDED - The 135° Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency.
  • 13PC METRIC BITS - The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm. Well organized in a plastic indexed storage case for easy transport to your worksite..
  • FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to do....
Check Stock

TEKTON 36 Inch Ratchet Bar Clamp / 42 Inch Spreader Set 2-Piece | CLP51536

  • Includes 2-pc 36 Inch Ratchet Bar Clamp / 42 Inch Spreader.
  • Continuous, trigger-operated ratchet action applies precise and consistent pressure.
  • Press quick release button to freely slide jaw to any position.
  • Soft jaw pads grip workpiece and protect surfaces from damage.
Check Stock

BEAMNOVA Sheet Metal Bead Roller Machine 18 inch Gear Drive Bench 6 Dies Set

  • Plate steel body and sports a full 18 inches of throat depth, making it perfect for strengthening any type of panels such as roof, deck, and hoods..
  • This bead roller is manually operated by a hand crank that drives both the bottom and top bead rolls..
  • This bench-mounted manually operated bead roller comes with the most popular sizes of forming rolls for HVAC work..
  • It comes with a rolling rack and six sets of the most common rolls required by metal forming enthusiasts.
Check Stock

3PCS 1/4 Inch Hex Shank Keyless Drill Chuck, Quick Change Adapter Converter Impact Drills Bits, Electric Tool Accessories (0.3-3.6mm/0.3-6.5mm)

  • [Package Included]: 3PCS 1/4inch hex shank keyless drill chuck, include 1X 0.3mm-3.6mm drill chuck, and 2X 0.3mm*6.5mm dill chucks. Easy to use and install, fast, convenient and safe, it is an essential power tool accessory in daily life..
  • [Quik Change Adapter Converter]: Keyless design allows one to easily and quickly swap bits and wires, easy to load and unload. Can quickly switch tasks and maintain work progress, which simplified all your tasks. Hexadecimal drive power tools are allowed to be applied with most drill bits..
  • [Strict Quality Control]: Our mini adaptor drill chuck manufactured under strict quality control. Made of high qualitity metal meterial. Durable, well-made, they are good enough for most jobs. Small size and light weight, will not bring additional burden to the operation.
  • [Keyless Drill Chucks Design]: Keyless drill chucks can easily turn a cordless electric screwdriver into a drill or grinder.
  • Can be easily to adjusted to quickly switch tasks and maintain work progress. They are essential power tool accessories..
  • [Wide usage]: These drill chucks' specifications are 0.3mm-3.6mm/0.3mm-6.5mm, which suitable for most drills and cordless power screwdrivers. For repairers, model makers, DIY enthusiasts,It is an ideal tool to use in garag....
Check Stock

GYZJ 6" Cross Slide Vise Drill Press Milling Vise, 6 in Jaw Width , 6.1 in Max Jaw Opening, Bench Mount Clamp Machine Vice Holder Clamping Tool for CNC Woodworking Milling Machine Drill Press

  • [Premium Quality Structure ]- The whole bench clamp is made of high-quality iron material with high hardness and stiffness. Strong clamping force, not easy to move, operated simply..
  • [Smooth Guide Rail] - The guide rail surface is finely ground, and the parallelism is 0.1mm, very smooth and flat.The contact with the parts could be more precise, and the movement is smooth without jamming..
  • [Powerful Clamping Force] - The mill vice has a powerful clamping force and can fix workpieces very securely. Clamping force: 29 KN, Jaw width: 6", Max Jaw opening: 6.1"..
  • [Flexible Handle]-The handle rotates naturally and smoothly. Pursue precision in production process, which made the contact surface finely polished, reduces the jam during use greatly and the vise jaw can be easily adjusted..
  • [Wide Application] - Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Most work of the fitters can be completed by using this clamping vise such as sawing, filing, chiseling and some assembly and removal jobs..
Check Stock