Top 60mm Nozzle

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

  • Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
  • Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
  • Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
  • High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
  • Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..
Check Stock

LabEdit Portable Vacuum Pressure Pump with Tubing and Connectors

  • ...mp is 110-120V and the working HZ is 60HZ so It is made for USA market. (If you want to use this product in other country, please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
  • There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. The three different size hoses are one piece 4mm ID x 5mm OD hose.
  • one unit 6mm ID x 9mm OD. These three type hose could fit most of different size filter bottle nozzle..
  • The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
  • The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the product is working..
Check Stock

Furnrubden Misting Cooling System with Pump, Patio Misting System, 60.4FT Tubing +26 Brass Spray Nozzles, Outdoor Water Patio Misters for Outside Patio, RV Camper Marine Greenhouse, Fan, Trampoline

  • Misitng System Product List : 12V DC Fresh Water Pump + power supply+ 18M(60.4FT) Including - 3M（10FT）Misting Hose Supply +15M（50FT） assembled misting line with 26 brass misting nozzles.
  • 60 cable ties + Instruction + 3/4inch Standard water tap adapter+1pc PTFE TAPE (If the power adapter or accessories are not configured, please contact us in time).
  • The parameters of micro pump: 12V 60W 5L / min, equipped with 12V 5A 60W AC DC power adapter.
  • (Its normal for pump to have water at the joint due to the test,when unpacking the package.).
  • Low pressure spray pipe fittings parameters: PE food grade materials, nozzle is made of brass, American standard size, orifice nozzle diameter: 0.4mm.
  • spray seat is sliding lock type fast push, can connect 1/4 inch pipe.
  • Uses: spray accessories are mainly used for spray cooling system, cooling, deodorization, humidification, watering, dust removal, gardens, irrigation systems, courtyards, gardens, swimming pools, playgrounds and so on. Working scene: shopping mall, park, artificial landscape, factory, workshop dry area, ....
Check Stock

Geeetech PLA 3D Printer Filament, 1kg Spool (2.2lbs), 1.75mm Dimensional Accuracy +/- 0.03mm, Silver

  • ✔️【Dimensional Accuracy & Consistency】– GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration. It works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
  • ✔️【1kg (2.2lbs) Spool】–Pack of 1 1kg/(2.2lbs) Silver Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc.
  • ✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers..
  • ✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament..
  • ✔️【100% Satisfaction Warranty】GEEETECH provides 100% Satisfaction Guarantee. If you are not satisfied with this filament, please kindly contact us at ANY TIME..
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

eSUN Carbon Fiber Filled Nylon Filament 1.75mm, PA CF 3D Printer Filament, 1KG Spool 3D Printing Filament for 3D Printers, Natural

  • 【Clog-free & Bubble-Free & Less-tangle】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN Carbon Fiber Filled Nylon filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking..
  • 【Wide Application】Compatible with most of FDM 3D Printers that use 1.75MM filament and suitable for making both strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.Recommend Carbon Fiber Nylon filament extrusion / Nozzle temperature 260℃-290℃, bed 45℃-60℃.Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of regular soft metal nozzles..
  • 【Stable Dimensional Tolerance】3D printer filaments are produced with high precise specification and have a tolerance of only +/- 0.05mm. Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance.Minimum tolerance and low warping to ensure consistent feeding and stable prints..
  • 【100% Vacuumed Sealed Packaging】Complete drying for 24 hours before packaging, eSUN filament comes in a sealed vacuum bag ....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

Flashforge 3D Printer Adventurer 3 Pro with 2 Removable Nozzle, Glass Bed and Leveling-Free, Fully Assembled, High Precision Printing with PLA/ABS/PETG/PLA-CF/PETG-CF

  • 【245℃ & 265℃ Nozzle Bundle】printer equipped with a 0.4mm 240℃ nozzle and a 0.4mm 265℃ nozzle. Heat to 200°C (392°F) within 60 seconds. Detachable design allows you to remove the nozzle from the extruder in one push..
  • 【Leveling Free & Glass Bed】Out of the box, Build plate is well leveled in the factory. Better flatness than flexible build plate, greatly minimal warping issues.Compatible with pre-released PEI platform assembly..
  • 【HD Camera & Support Various Filament】Built-in HD Camera allows you to remotely view the printing process online. Adventurer 3 Pro shows great performance on 3d printing ABS, PLA, PC, PETG, PLA-CF, PETG-CF, and other filaments..
  • 【Filament Auto-Loading & Mute Printing】Enclosed spool holder, put filament end in, then trigger filament loading via the touchscreen for auto & smooth feeding. .
  • 【Efficient After-sales Support】All of our 3d printers provide one month free return and exchange. Lifetime technical support, a one-year warranty and reliable 12-hour response service. At Flashforge, zero risk purchase is for every customer’s smiles..
Check Stock

Dual Exhaust Tips Muffler Tip Chrome Exhaust Tip Heart Shaped Car Muffler Double Tube Universal Stainless Steel Car Exhaust Muffler,For Fitment On Most Cars Sedans Suitable For 48mm-60mm Exhaust Tip

  • ... have the advantages of high temperature resistance,resistance to rust,strong corrosion resistance and long service life.They can protect your original exhaust for a long time and completely cover and protect your original exhaust tailpipe..
  • ☻[Production process] Exhaust nozzle surface polishing+color electroplating process design treatment, the inner cylinder of the exhaust nozzle is coated with special high-temperature coating, which has super corrosion resistance and exquisite craftsmanship, which can help you car The exhaust port has a smooth appearance. The exhaust tail pipe is suitable for pipes with a diameter of 48mm-60mm. Please measure the diameter of the pipe before purchasing..
  • ☻[Easy to install/no need to drill] When installing the tip of the exhaust pipe,clean the surface of the old tip of the vehicle,and then only use a wrench to fix the 3 screws to the appropriate position of the exhaust pipe,and then firmly fix it after installation Fix it to the exhaust pipe of the original car,it will not fall off,and replace or protect old parts perfectly and firmly.(Do not install this product on a car that has just been stopped or started to avoid burns).
Check Stock

Voxelab 3D Printer Filament, 1.75mm PLA Pro (PLA+) Filament, Dimensional Accuracy +/- 0.02 mm, 3D Printing Material 1kg/ Spool, Compatible with FDM 3D Printer/Pen (Natural)

  • 【Premium PLA Filaments】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish..
  • 【1KG (2.2LBS) SPOOL 】Spool size: Φ200mm/7.87" flange, Φ53mm/2.09" hub hole, 65mm/2.56" width. Filament dimensional accuracy 1.75 +/- 0.02mm. PLA filament has minimal shrinkage and warping..
  • 【Vacuum Packaging】Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Technical Specifications】Recommended Extrusion/ Nozzle Temperature 190°C - 220°C, net weight 1kg spool, hot bed 25°C - 60°C..
  • 【Wide Compatibility】Works and harmonizes perfectly with all common 1.75mm FDM 3D printers. Voxelab 3d filament 1.75mm is the most common and easiest to print with since it is cheap and does not have warping issues and has good adhesion to the bed..
Check Stock

4 Pcs Soldering Nozzles for Hot Air Gun SMD Rework Station 853d 862d Replacement

  • [Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
  • [Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
  • [Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
  • [Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
  • [Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.
Check Stock

Furnrubden Misting System with Pump, Patio Misting Cooling System, 68.24FT Tubing +29 Brass Spray Nozzles, Outdoor Water Patio Misters for Outside Patio, RV Camper Marine Greenhouse, Fan, Trampoline

  • Misitng System Product List : 12V DC Fresh Water Pump + power supply+ 20.8M(68.24Ft) Including - 4M（13.12FT）Misting Hose Supply +16.8M（55.12FT） assembled misting line with 29 brass misting nozzles.
  • 60 cable ties + Instruction + 3/4inch Standard water tap adapter+1pc PTFE TAPE.
  • The parameters of micro pump: 12V 60W 5L / min, equipped with 12V 5A 60W AC DC power adapter.
  • ((Its normal for pump to have water at the joint due to the test,when unpacking the package.)).
  • Low pressure spray pipe fittings parameters: PE food grade materials, nozzle is made of brass, American standard size, orifice nozzle diameter: 0.4mm.
  • spray seat is sliding lock type fast push, can connect 1/4 inch pipe.
  • limit pressure: 30bar (450psi), only for outdoor cold water.
  • Uses: spray accessories are mainly used for spray cooling system, cooling, deodorization, humidification, watering, dust removal, gardens, irrigation systems, courtyards, gardens, swimming pools, playgrounds and so on. Working scene: shopping mall, park, artificial landscape, factory, workshop dry area, can effectively suppress dust, deodoriz....
Check Stock