Top 6hp Stroke Outboard Motor
Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System
- Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
- two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
- 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
- Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
- The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check StockOutboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
- Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
- Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
- Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
- Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
- The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check StockFuel Pump with Gasket - Compatible with Johnson Evinrude Outboard Motor - Pre 1993 6hp 9.9hp 15hp Models - Replaces Part 395091 397839 18 7350 397274 391638
- Replacement Fuel Pump for Outboard Motors. Pre 1993 engine models. Fixes common issues.
- motor wont run at full power or will only run with choke on..
- Replaces Part numbers - 397274, 397839, 391638, 395091, 9-35350, and 18-7350.
- Compatible replacement for Johnson Evinrude Outboard Boat Engines produced up to 1993. Including 6hp, 8hp, 9.9hp, and 15hp.
- Factory quality, fit, and finish. Each fuel pump is carefully assembled and tested to insure flawless performance on your Outboard motor. Each fuel....
- Backed by a 2 YEAR WARRANTY, rest assured your boat will be back to full power..
Check StockOutboard Motor Boat Engine 4 Stroke 6HP Heavy Duty Outboard Motor Fishing Boat Engine with Air Cooling System,Marine Gasoline Fishing Boat Engine
- 【4 Stroke 6HP】Air cooling technology to improve the reliability of the whole machine. Features 360 degree steering rotation for reverse without....
- 395x348x1150 mm, Machine weight (kg) 26, Gasoline engine technical parameters: Model RV170..
- 【MAIN SPECIFICATIONS】Power output mode.
- 【SUPERIOR AIR-COOLING SYSTEM 】Our outboard boat motor is installed with superior air-cooling system, allowing you to fish all day long without....
- 【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the....
Check StockPropeller, Aluminum Alloy Propeller 7.8×8 for Tohatsu for Nissan for Mercury Outboard 4HP 5HP 6HP
- 100% brand new aftermarket Outboard Propeller, Suitable for Tohatsu for Nissan for Mercury Outboard 4HP 5HP 6HP.
- Made of materials aluminum alloy material, flexible and high reliability.
- This is a durable marine propellers with good performing.
- Original standard, directly replace your old one or broken one.
Check StockOutboard Motor 6HP 4 Stroke Outboard Motor Tiller Shaft Boat Engine Fishing Boat Engine Single Cylinder Air-Cooling 6HP 4-Stroke
- ▶This 6HP 4-Stroke Outboard Engine: Model:single cylinder、air cool、four stroke、hand pull.
- ▶Detailed Information:Ignition system:transistor non-contact electronic ignition.
- Noise exhaust method: muffler out machine....
- ▶Premium Quality: Durable cast aluminum construction for superior corrosion protection.
- vertical mount engine design for increased power,....
- ▶Tips: Add gasoline and engine oil to the box accordingly. (a box to add gasoline and a box to add engine oil) Don't mix the gasoline with engine....
- ▶About US: Ship from US stock ! We have our own overseas warehouse and a professional Customer Service Team to reply you within 24 hours. If you....
Check StockWINGOGO Water Pump Impeller 6E0-44352-00 6E0-44352-003 Replacement for Yamaha Outboard 4 5 6 HP F4 F6 Boat Motor Engine Parts Sierra 18-3073 6E0-44352-00-00 6EO-44352-00 47-96305M
- This Water Pump Impeller fits Yamaha Outboard Motor OEM P/N 6E0-44352-00-00 Sierra 18-3073. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
- Replacement for Yamaha Outboard 4HP 5HP 6HP Mercury Mariner 4A 5C Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
- Water pump impeller dimensions measured that shaft size 11.0 mm, overall diameter 40.0 mm, thickness 12.6 mm, Blades 6. Water pump impeller is made with neoprene and hardened nylon as pictures showed, Please see the pictures..
- Compatible with the outboards boat motor Mercury Mariner 96305M/47-96305M Sierra Marine 18-3073 Mallory Marine 9-45611 GLM 89860 SEI Marine 96-499-03B. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
- To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirmed this Water Pump Impeller fits Your Outboard Boat Motor or not. We’r....
Check StockCLIENSY 4HP 4 Stroke Outboard Motor Boat Engine Heavy Duty 52CC Boat Motor with Air Cooling CDI System
- 【High Performance Motor】: The outboard boat motor using 4.0 HP 4 Stroke strong power high quality with friendly price.
- 【Air Cooling CDI System】: This outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day....
- 【Convenience to Use】: Features 360 degree steering rotation for reverse without gear shifting..
- 【Durable and Safety】: Comparable lubricating system for 4stroke outboard engine maneuverable and safe twist grip throttle control..
- 【Widely Applications】: Our boat motor can be marched with inflatable boats, rubber boats or fishing boats..
Check StockMinn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft
- ♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
- Recommended Lubricant: 2 Stroke Lubricating oil.
- ♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
- Recommended Propeller range: 3 -9"1/4''x8".
- ♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..
Check StockTFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW
- 【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
- Packing size:133x71x38.5cm/52.3''x27.9''x15''.
- 【Main Parameters】Control System: #93 gasoline.
- Recommended Propeller range: 3 -9"1/4''x8".
- Recommended Lubricant: 2 Stroke Lubricating oil.
- 【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
- Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
- After use, the fuel in the carburetor must be completely discharged..
- 【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....
Check StockPortable Boat Fuel Tank 12L 3 Gallon Marine Outboard Motor Fuel Tank w/Connector
- This Outboard Fule tank is made from Strong UV Stabilised Plastic (polyethylene), won't rust, crack or chip..
- It's light wieght compact and has a convient carry handle, easy to stow, safe and strong..
- 12 Litre (3 Gallon) capacity most people call this a 12lt tank but its only 11.3LT Screw-on cap with breather vent..
- Standard nozzle: outboard motor(above 6HP)interface from the back holes..
- It's perfect for Small to Large Boats, Inflatables, Tinnies, Canoes and even Kayaks..
Check StockGDNTMU 2 Stroke 2.3HP Outboard Motor Boat Engine Heavy Duty Fishing Boat Engine Water Cooling CDI System 8500r/min(US Stock)
- 【MULTI-FUNCTIONAL OF TWO-STROKE MOTOR 】- 2-STROKE motor is fixed on the outside of the beam and is designed to pivot on its mounting seat to control the direction of thrust. Therefore, in addition to providing propulsion, the outboard also provides steering control and a perfect balance of power and efficiency. When the engine is not running, Skeg can also act as a rudder. Note that the motor must be started underwater..
- 【MARINE LIGHT AND SMALL OUTBOARD ENGINES FOR KAYAKS AND CANOES (MARINE ENGINES) 】- Increasing low horsepower (two-stroke) outboard engines can strengthen boats such as kayaks and canoes. Two-stroke engines are louder, less fuel efficient, and maintainable, but they provide higher performance. If the rower?s arms become too tired and/or need to paddle hard, an electric motor can be helpful..
- 【ADVANCED AIR COOLING SYSTEM 】- Advanced engine water cooling system can improve engine performance. The air cooling system allows you to fish all day without overheating. Due to water quality issues, air cooling eliminates the time for the pump part, which is very useful for daily use..
- 【ADDITION FUNCTIONS】 - Features 360 degree steering rotation for reverse without gear shifting.Start-In-Gear protection/clutch feature prohibits prop....
Check Stock