Top 70mm Extruder Machine

3D Printer 3 in 1 Out Multi-Color Extruder Three Colors Switching Hotend Compatible with Titan Extruder and Bulldog Bowden Extruder 1.75mm

  • Thermistor:100K NTC 3950, main heat sink block 60*27*27mm.
  • This extruder kit can be used as single color filament printing, dual colors filament printing or 3 colors filament switching printing, but not for....
  • Bowden feeding, Compatible with Bulldog, Titan or other types of Bowden extruder (Bulldog extruder is recommended).
  • Color switching is fast and stable, without significant print quality defects..
  • Firmware modification is simple, easy to use.
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....
Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

  • Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
  • Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
  • Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

  • 【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
  • 【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
  • 【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
  • 【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
  • 【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....
Check Stock

Artillery Sidewinder SW-X2 3D Printer Latest Model Ultra-Quiet Printing 300x300x400mm Automatic Leveling Power Failure Recovery 95% pre-Assembled 110V-220V Free Switching

  • The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it....
  • The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR....
  • There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and....
  • SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically....
  • With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive....
Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

  • 【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.
Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

  • Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
  • Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
  • Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
  • Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
  • Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..
Check Stock

YOTINO 10Pcs 3mm Thick Heating Block Cotton and Aluminum Heater Block for MK7 MK8 Makerbot 3D Printer Hotend Nozzle

  • 【Value Pack】5 Pcs Aluminum Heater Blocks, 10Pcs 3mm thick 3D printer heating block cottons..
  • 【Aluminum Heating Block】M6 heating block: 20 * 20 * 10mm, Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)..
  • 【Heating Block Cotton】Size:20 * 70 * 3mm. Resistance to thermal shock, low thermal conductivity and thermal capacity,saving power and energy. Better printing effect with this 3d printer heat insulation cotton..
  • 【Perfect Compatibility】These heating aluminum blocks are suitable for MK7 MK8 Makerbot 3D Printer structure, works with extruder nozzle throat & heat-insulated cotton..
  • 【Note】The thermal insulation cotton does not have the pre-punched holes, you can cut to the appropriate size and punch holes on the cotton according to your need..
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock