Top 70mm Nozzle

IIYL Oral Hygiene Accessories Water Hose Plastic Handle Compatible for Waterpik Oral Irrigator Wp-100 WP-900, Pack of 1 Handle/Hose

  • ✔ Effective removal of oral odor.Extra gentle cleaning for around Implants, bridges, and crowns..
  • ✔ Small investment, Peak performance - We recommend changing your handle Assembly Kit and water tips every 3 months to maintain your irrigator maximum performance..
  • ✔ Ultra-fine soft nozzle that removes periodontal pockets from 6-7mm under the gums at the lowest pressure..
  • ✔ Compatible with: Waterpik WP-70E, WP-60.
  • ✔ Package includes 4pcs nozzle for Waterpik..
Check Stock

ZIRO Matte PLA Filament 1.75mm,1KG 3D Printer Filament,High Toughness PLA,Dimensional Accuracy +/- 0.03mm,Matte PLA Chocolate

  • [ZIRO Matte PLA filament] The fantastic frosted texture make your artworks less plastic-feeling, more advanced beauty. Hassle-free printing, no....
  • [Recommended print settings] Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-70℃, Print Speed 30-70mm/s..
  • [Dimensional Accuracy and Consistency] Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament, compatible with most FDM 3D printers..
  • [Packaging] Vacuum sealed with desiccant. An extra reseal bag for storing used filament, a 5M cleaning filament, a 5M sample filament coil..
  • [After-sales service] We are always ready to help. ANY questions, please feel free to contact us, we will offer you a satisfactory solution..
Check Stock

Orbit 58543 Telescoping Gutter Clnr

  • TELESCOPING POLE: This wand easily extends from 40 inches to 70 inches making those hard-to-reach rain gutters easy to clean..
  • ROTATING NOZZLE: The zinc sweeper nozzle rotates 180 degrees, so you can position the spray in the direction you need..
  • FOUR POSITION HEAD: Angle the spray head up or down to obtain the perfect water direction needed for your cleaning project..
  • DURABLE CONSTRUCTION: Lightweight, non-corrosive construction ensures it will last season after season..
  • NON-SLIP GRIP: The padded foam grip adds comfort and insulates your hands from cold-water temperatures..
  • Telescoping wand easily extends from 40″ to 70″ for increased range of use.
  • Lightweight yet rugged metal construction.
Check Stock

Orbit Telescoping Gutter Cleaner

  • Length: 40" to 70" Powerful sweeping spray cleans away debris from gutters, driveways, sidewalks, and curbs Telescoping wand easily extends from 40-in to 70-in Zinc sweeper nozzle rotates 180 degrees 4-position ratcheting head Lightweight aluminum Construction Nozzle Fitting size: 5/8-in.
Check Stock

ZIRO Matte PLA Filament 1.75mm,1KG 3D Printer Filament,High Toughness PLA,Dimensional Accuracy +/- 0.03mm,Matte PLA Military Green

  • [ZIRO Matte PLA filament] The fantastic frosted texture make your artworks less plastic-feeling, more advanced beauty. Hassle-free printing, no bubble, tangle-free, clog-free, as easy printing as regular PLA filament..
  • [Recommended print settings] Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-70℃, Print Speed 30-70mm/s..
  • [Dimensional Accuracy and Consistency] Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament, compatible with most FDM 3D printers..
  • [Packaging] Vacuum sealed with desiccant. An extra reseal bag for storing used filament, a 5M cleaning filament, a 5M sample filament coil..
  • [After-sales service] We are always ready to help. ANY questions, please feel free to contact us, we will offer you a satisfactory solution..
Check Stock

Dry Box for 3D Filament Storages, JAYO Filament Dryer Box, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm Filament and PLA PETG TPU ABS Material, Spool Holder

  • PETG filament,PETG multicolors,PETG rainbow ,net weight 1kg.
  • PETG is tough and practical useful, gradient colors looking nice.
  • Recommend setting, nozzle temp 220-230 degree,hotbed 70, printing speed 23-38mm/s,retraction speed 45mm/s,retraction length 4mm.
  • Recommend as soon as possible to print the whole roll filament once it opened..
  • Controlling the moisture content of the PETG material is critical for 3D printing because the PETG molecular structure automatically tends to dehydrate even when the vacuum package is not opened. Drying temperature 70, lack of equipment can be exposed to the sun exposure for 4 hours.
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

PH PandaHall Glue Tips, 100pcs Plastic Glue Micro-Tips Glue Extender Precision CA Glue Applicator for Arts Crafts Hobby Projects Guitar Fret Slot, White

  • ...ut 70~80mm/2.75~3.14" long, outer dameter: 5mm, inner diameter: 3.5mm. Tips:0.8mm. Slim thin and longer design, small enough to get into the smallest of areas, solve your problem for tight space glue application!.
  • Large Quantity: 100pcs provided to meet your various craft needs, fit tightly with most CA bottles with nozzle. Disposable when you finished, and then recap your CA glue bottle with no mess, keeps the original glue tip/nozzle clean until disposed..
  • Material: the ca glue tips are made of plastic, soft and durable, can prevent curing and clogging, the 0.8mm fine tip slows material flow for better control of fluid deposits. Just put it on the mouth of your super glue, apply your instant glue more precisely, easy to take off..
  • For Hobby Projects: perfect for your hooby projects, such as model cars, jars, boats and 3D wood kits. Can help size and finalize the design or repair/fix the small components. Can get into guitar fret slots easily. Great for your fine work maintenance..
  • Protect Your Hands: slove your problem of dropping glue into small places. No mess on your hands or workplace. If tip dries, clip off tiny bit of tip and it will flow again. Prevent inevitable spilling accidents and allows more control over the amount of glue..
Check Stock

Moccasin Joe Smoke in a Bottle Wind Checker-1.5 oz

  • Fit: Special designed for SPX Series Pressure Washers, brass quick connector fit for SPX1000, SPX1500, SPX2000, SPX2500, SPX6000.
  • foam lance fit SPX4000, SPX4001 if use M22-14mm Connector..
  • Brass Quick Connector: Main body of nozzle is solid brass, more durable than common or plastic connector for long term use. Thickened bottle neck for more strong and not easy to break..
  • Easy to Use: Adjust top knob to regulate water, minus (-) sign indicates less water and more foam, the (+) indicates more water and less foam. adjust the Spray nozzle to get a proper spray pattern.
  • Requirement: Require pressure washer have 70BAR - 10O0 PSI Pressure and 2.0Gpm flow for use. Maximum pressure: 200BAR - 3000PSI.
  • Maximum flow:5.3Gpm. Highest Water Temperature: 60/140..
  • Multiple Use: Car, Motorcycle Washing, floors, Windows washing, Driveways, Roofs, Siding washing and so on. Ideal for enthusiast or professional use. Can be directly connected on the pressure washer..
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

TRONXY XY-2 PRO-2E 3D Printer, Single-Color / 2-Color Printing Maximum Print Size 255 * 255 * 245mm,Easy to Assemble/Quiet Drive/Power Failure Recovery /2 Titan extruder Function for Home Education

  • ...E is equipped with a DC 24V360W power supply. The AC terminal has two voltage options: 110V and 220V. Customers can be adjusted freely. Hot bed temperature can rise to about 120 ° C in a short time. Please reduce the waiting time before printing..
  • [Two-color printing] 2E is equipped with two TITAN extruders and one nozzle, and a simple two-color model can be printed. Users can try different two-color combinations simply by using slice software, and can create models more creative. ***** Two color settings need to be aware of the following two points: Others are basically the same as single color. Nozzle switch pull-in distance ≥ 60 mm, nozzle switch retraction speed 70 mm / s..
  • [Quiet Environment]: German Imported TMC Mute Driver Chip, Mute Printing, Low Decibel Operation, Create a Quiet Print Environment.
  • [Warranty deadline] If there is a problem with purchase and use, it will reply to your message as soon as possible within 24 hours. At the same time, after receiving the product, you can enjoy a lifelong technical service and a year warranty. We always pay attention to your feelings and suggestions. Welcome to inquiry..
Check Stock

GDHXW X-999 Foam Wash Gun 3000 PSI High Pressure Snow Foam Lance Foam Cannon Foam Blaster with M22-14mm Thread 5 Pressure Washer Nozzles for Cleaning Car

  • Pressure washer gun is Metric M22-14mm inner connector Adjustable Snow Foam Lance with 1/4" quick disconnection fitting.Capacity:0.22 Gallon(1L) .Requires pressure washer to Have 2.0GPM & Over 1000 PSI Pressure for use.Requires pressure: 70BAR - 1000PSI.
  • Foam Lance core is made of quality brass.The main body is solid brass and is heavy. There are (2) adjustment's that allow you to dial-in the sprayer for any situation: top dial is for foam dispensing amount and the nozzle adjusts the spray pattern (wide to narrow)..
  • Spray Nozzle has 5 different spray angle : Meet your need in different situations, such as watering flowers and plants, washing car, and can be attached to a quick-connect wand for swifter application and more..
  • Variable adjustable spray nozzle for accurate mixing and foam generation.Turn the top knob right / closed to get the thickest mixture, adjust the nozzle to get a proper spray pattern, and let it loose..
  • Multiple use: Car Washing, floors,Windows washing, Driveways, Roofs, Siding washing and so on.Ideal for enthusiast or professional use.It can be directly connected with the gun on the pressure washer gun..
Check Stock