Top 75w Ballasts

Phantom PHB4035 Commercial 1000W Double-Ended Digital HPS, 277V/347V Ballast

  • Phantom double-ended technology drives maximum PAR value! The engineering excellence of Phantom ballasts is now incorporated into our new Phantom Commercial DE ballasts. Their high-frequency design is optimized for double-ended 1000W HPS lamps, and they feature highly precise microprocessors..
  • They are totally silent, efficient and effective. This model, PHB4035, is capable of 277V and 347V operation, is generator-ready and FCC-compliant, and comes with instructions and an 8-foot power cord (with bare wires.
  • 277V and 347V plug options are available from Hydrofarm)..
  • FEATURES: High-precision microprocessor control, Robust commercial design, Superior reliability, Internal RF shielding, Patented ignition control, Auto-restrike feature protects valuable lamps from damaging power interruptions, Cooling fins for maximum heat dissipation, Suitable for use in damp locations, Comes with 8′ hard-wired power cord (no plug installed), 1000W output, FCC-compliant, CSA-certified..
  • Please note that this model does not have wattage output control (dimming) and is not PX1-compatible. Remote (detached) use of reflectors with Phantom ballasts from the 40 Series line should only be done with Hydrofarm brand reflectors having a built-in 15′ cord..
Check Stock

NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Yescom 55W HID Ballast DC 12V Universal Replacement for Xenon Light H1 H3 H7 H8 9005 9006 Pack of 2

  • [Application]: 2Pcs of HID Ballasts make low voltage rise to high voltage to activate Xenon in car lamp for fast entering working status, maintaining....
  • [Efficient & Stable]: Compared with magnetic ballasts, HID ballasts can reduce the input power more than 10% for saving energy.
  • [Durable & Safe]: Aluminum shell for providing water resistance, dust resistance and anti-vibration, perfect for working in different occasions.
  • [Plug & Play]: Integrated one-piece ballast with plugs for fast and easy connecting, no tools required, just connect to car with 12V light socket to....
  • [Wide Application]: Widely used for replacing your defective ballast and making your car lights into working status quickly.
Check Stock

NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Yescom 35W HID Slim Ballast DC 12V Digital Universal Replacement for Xenon Light H1 H3 H7 H8 9005 9006 Pack of 2

  • [Application]: 2Pcs of HID Ballasts make low voltage rise to high voltage to activate Xenon in car lamp for fast entering working status, maintaining....
  • [Efficient & Stable]: Compared with magnetic ballasts, HID ballasts can reduce the input power more than 10% for saving energy.
  • [Durable & Safe]: Aluminum shell for providing water resistance, dust resistance and anti-vibration, perfect for working in different occasions.
  • [Plug & Play]: Integrated one-piece ballast with plugs for fast and easy connecting, no tools required, just connect to car with 12V light socket to....
  • [Wide Application]: Widely used for replacing your defective ballast and making your car lights into working status quickly.
Check Stock

YDC 2X D2 D2S D2R D2C HID Xenon Bulb Adapters Wire Harness Connector Cable Socket for Replacement Ballast Application,Retrofit Project Headlight,Fog Lamp Red

  • These adapters make it possible for aftermarket bulbs to be connected to D2S ballasts.
  • These are D2 Adapters For reusing your OEM type D2s/D2r/D2c bulb on your oem equipped hid headlights.
  • REUSING YOUR BALLASTS: These will save you some money and allow the use of D2S bulbs with your aftermarket HID ballasts. Works with 99 percent of....
  • INDUSTRY STANDARD: These are built to industry standard specifications for AMP male/female high-voltage outputs, and 'D2S' bulbs. They should work....
Check Stock

Nanolux ballasts 0-10V Module w/3 Way Splitter & 9 Cable

  • Nanolux now offers 0-10V control modules for all NCCS ready ballasts. The 0-10V module allows all Nanolux ballasts to run on any controller using....
  • Voltage range for dimming is from 100%-50% is 10V-5V..
  • Comes with 3-way splitter and 3-meter RJ11 cable.
Check Stock

Quantum 1000W Digital Ballast 120/240V Dimmable Ballast

  • Run at 100%, 75% or 50% power and strikes both metal halide and high pressure sodium bulbs.
  • Accepts 120V/240V with no wiring needed (both cords included).
  • 208V-configurable with electrician assistance.
  • The most stable output frequency of any ballast, and runs 15% cooler than other digital ballasts on the market.
  • Higher lumen output than magnetic ballasts and can run efficiently on generators without flickering.
  • Resin sealed circuit board for high humidity installations and can easily be used in conjunction with lighting controllers and flip boxes.
Check Stock

DDM Tuning Plus 55W Premium Canbus HID Kit 9012 5500K

  • The DDM Plus Canbus ballast is part of the DDM Plus line of HID kits. The DDM Plus Kits use our Ultra HID Bulbs and premium HID Ballasts. Why DDM....
  • Guaranteed Error Free on "Picky" Vehicles among many others. Works on domestic trucks with tuner software..
  • Simple plug and play installation. No cutting or splicing required.
  • Kit Includes: 2 x DDM Plus Canbus 55W HID Ballasts, 2 x ULTRA Bulbs..
  • WARRANTY: As always our HID kits come with a LIFETIME WARRANTY..
Check Stock

DDM Tuning Plus 35W Premium Canbus HID Kit 9012 5500K

  • The DDM Plus Canbus ballast is part of the DDM Plus line of HID kits. The DDM Plus Kits use our Ultra HID Bulbs and premium HID Ballasts. Why DDM....
  • Guaranteed Error Free on "Picky" Vehicles among many others. Works on domestic trucks with tuner software..
  • Simple plug and play installation. No cutting or splicing required.
  • Kit Includes: 2 x DDM Plus 35W Canbus HID Ballasts 2 x ULTRA bulbs..
  • WARRANTY: As always our HID kits come with a LIFETIME WARRANTY..
Check Stock

DDM Tuning Ultra Canbus 55W HID Kit All Bulbs and Colors 9005/9006 5500K

  • Ballast: The ballasts have been further improved for 2015 to require less current on startup to protect the factory wiring and to extend the life of....
  • Bulbs: Our Premium Ultra HID bulbs are quite simply the best..
  • Output: Up to 3400 Lumens with a 4500K bulb..
  • Kit Includes: 2 x DDM Ultra Canbus HID Ballasts, 2 x Ultra HID Bulbs..
  • Warranty: As always our HID kits come with a lifetime warranty..
Check Stock

LASFIT D2S D2R D4S D4R LED Bulbs 60w 6000lm/set 6000K Cool White, Upgrade D2 LED Bulbs (2pcs)

  • 【Efficient Light Performance】：6000K bright white D2S/D2R/D4S/D4R LED bulbs, 3000lm，30wper bulb，clean and cool bright light, strong penetrating power in harsh weathers..
  • 【All-in-one Design】: no need to buy ballasts, total upgrade value is lower than changing to new original ballasts or xenon bulbs with aftermarket ballasts. No need to buy a ballast and original bulbs..
  • 【Instant on, faster than OEM bulbs】: no warm-up time, get to full light output quickly, shine more light down the road and off to the sides, give you more time to react to potential hazards..
  • 【Installation】: For some vehicle, the bulb is not fully plag and play, we offer a set of universal power cable to make a connection with the original harness. It's to hard to make it right. Just confirm the polarity of the 2 wires..
  • 【Note】: We provide 1 year repalcement warranty. Please check the bulb size of your stock bulbs, if you are not sure which bulb size fits for your vehicle, please feel free to contact us..
Check Stock