Top 802 3af Poe

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

StarTech.com 4 Port Gigabit PoE (Power over Ethernet) Card - PCIe Network Card - PoE / PoE+ Up to 25W Per Port - PCIe NIC - Gigabit Ethernet Card (ST4000PEXPSE)

  • FULLY COMPLIANT: This 4 port Gigabit PoE card is fully compliant with IEEE 802.3at (Type 1 & 2) Power over Ethernet (PoE) standards.
  • PSE SUPPORT: This PCIe network card features a Power Sourcing Equipment (PSE) endpoint that supports up to 48V, 25.5 watts max. output per port.
  • POWER YOUR PoE DEVICES: Provide connectivity and power to compatible PoE devices, including cameras and wireless access points using this PCIe PoE Ethernet card.
  • ULTIMATE SUPPORT: The Gigabit NIC supports IEEE 802.3at, 802.3az Draft 2.2 Energy-Efficient Ethernet (EEE), 802.1q VLAN tagging, 802.1p Layer 2 Priority Encoding and 802.3x Full Duplex Flow Control.
Check Stock

Cudy 8 Port Gigabit PoE Switch, 120 Watts PoE Budget, 8 10/100/1000Mbps PoE+ Ports, 2 Gigabit Uplink Ports , 802.3at, 802.3af, 1/2 (+), 3/6 (-), Fanless, Plug and Play, GS1010PE

  • 120 watts reliable 8 ports gigabit PoE+ switch. GS1010PE contains 10 gigabit RJ45 ports, #1~#8 port support PoE functions which could offer 120 watts total PoE budget, while port #9~#10 port are just uplink ethernet ports only transfer data..
  • 8 Gigabit PoE+ ports Ideal for small installations of 8 PoE or PoE+ devices (IP Phone, Wired surveillance camera, Wireless Access Point). 2 Gigabit uplink ports are suitable for connecting to the Internet and NVR respectively, which is very suitable for video surveillance and WiFi access applications..
  • Compatible with any IEEE802.3af PoE and IEEE802.3at PoE+ device. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ (30 watts) device with backwards compatibility for 802.3af PoE (15.4 watts) devices. Not support any passive (non-standard) PoE devices..
  • Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
  • Plug and play, simple set up with no software or configuration needed. Built in power supply accommodate for most installation scenarios..
Check Stock

StarTech.com 1 Port 2.5Gbps PoE Network Card, PCIe Ethernet Card w/RJ45, 30W 802.3at PoE NIC for Desktops/Servers, Network PoE LAN Adapter w/Low-Profile Bracket, NBaseT, Windows/Linux (ST1000PEXPSE)

  • 2.5G NETWORK CARD WITH POE: This PCI Express x1 Network Card enables 2.5Gbps network speeds and supplies (PSE) 30W PoE over a single CAT5e (or later) cable - Leverage existing copper cabling without the use of a Power over Ethernet (PoE) injector.
  • POE+ COMPLIANT: Card provides up to 30W PSE and 25.5W PD at 48V DC to a connected device - Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras.
  • MULTI-GIGABIT CONNECTIVITY: The Network PoE Card features 2.5GBASE-T (802.3bz) and will auto negotiate to the connected device's highest possible speed - The PCIe Network Card supports Wake-on-LAN and RealWoW for remote wake up of the host computer.
  • TECH SPECS: 2.5Gbps/1Gbps/100Mbps/10Mbps - NBASE-T - 1x RJ45 Port - Realtek RTL8125B - IEEE 802.3af/at - 802.3az EEE - PCIe 2.1 x1 - SATA & SP4 Power Connectors - Link/PoE LED Indicators - 16K Jumbo Frame - VLAN - PXE Boot - Full and Low-Profile Brackets.
  • VERSATILE POE NETWORK CARD: The PCIe Ethernet Adapter supports Windows and Linux - Variable speed options and includes a low-profile bracket for Small Form Factor (SFF) systems ensures compatibility of the PoE NIC with current and legacy devices.
Check Stock

Cudy 8 Port Gigabit PoE+ Switch 120W, PoE Switch, 60 watts port1, 8 PoE Ports, 802.3 at/af, POE, PoE+, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1008PT

  • 8 Port Gigabit PoE Switch, 120 Watts total PoE Budget + 2 x PoE+ports ( 60 watts maximum) +6 x PoE+ Ports(802.3at, 30 watts maximum)..
  • IEEE 802.3 at/af Compliant. Port #1 and #2 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #3 ~ Port #8 support IEEE 802.3 at/ af, which could offer up to 30 watts PoE power..
  • VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #6 will isolated from each other, while port #7 and #8 can communicate with them all. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 ~ #6 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at/bt standard. #Important Note: This item only support IEEE802.3 at/af device, does not support any non-standard or passive POE device.#.
Check Stock

Mikrotik OmniTIK 5 PoE ac 7.5dBi Gb Ethernet Ports Access Point Omni Antennas

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

Mikrotik wAP 60Gx3 AP WLAN Access Point Power Over Ethernet (PoE) White

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

DSLRKIT Gigabit 48V 30watt PoE Injector Adapter Power Over Ethernet 802.3at af 1000Mbps

  • Support international standard IEEE802.3 af & IEEE802.3at(30W).
  • POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at..
  • PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module.
  • Support the isolation circuit protection, can effectively protect electrical equipment.
  • Support the short circuit, overvoltage protection.
  • 12V 2A power output, easy to access Poe network for non-PoE terminal.
Check Stock

StarTech.com 4 Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af - Wall-mountable Power over Ethernet Midspan (POEINJ4G)

  • Deliver power and data to four PoE-powered devices(PD)using this wall-mountable PoE+ midspan hub.
  • 4 Port Gigabit Power over Ethernet Midspan.
  • Wall-mountable Power over Ethernet Injector.
  • Delivers more power with up to 30w per port.
  • Deliver power and data to four PoE-powered devices (PD) using this wall-mountable PoE+ midspan hub.
  • Delivers more power with up to 30 w per port.
Check Stock

ThePoEstore 60W Gigabit PoE Injector Up to 60W Ultra Power Supply 10/100/1000Mbps IEEE 802.3at/802.3af Compliant Plug & Play

  • 1 CH Gigabit Ethernet port input and PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds..
  • Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not....
  • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away..
  • Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or....
  • LED power input indicators for and PoE output,Internal AC/DC converter no need for external power brick ,Easy plug-and-play installation..
Check Stock

PoE Texas 802.3af Power Over Ethernet PoE Splitter with 5 Volts 10 Watts Output - for 5V Non-PoE Security Camera and Devices Like Foscam Sonoff Tablet USB Dropcam Raspberry Pi and Others

  • 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features....
  • 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x....
  • This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit....
  • Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning....
  • All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call....
Check Stock

XM1000pro

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
  • 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check Stock