Top 80hz Pprs

Ciwoda DisplayPort 2.0 Cable 6ft, Nylon Braided 16K DP 2.0 Cable Support 80Gbps, 16K@60Hz, 10K@60Hz, 8K@60Hz, 4K@165Hz, Dynamic HDR for Gaming Monitor, TV

  • ...ime Guarantee】 This displayport 2.0 cable is providing 3 after-sales service if you have any quality issue, including (*Lifetime Replacement+*Lifetime Money-back and *Lifetime Technical Support). Please feel free to contact us via Amazon. 1, Address your order ID. 2, Final click button "Contact the Seller"..
  • ⚡【80Gbps DP 2.0 Cable】The Ciwoda 16k dp cable transmission rate is up to 80Gbps which is 3X faster than displayport 1.4 cable. Stable and High-speed transmission without signal loss. It is also compatible with the previous versions of the DP. Plug and Play. Works with DP, DP++, and DisplayPort++. FEC forward error correction. No motion blur, screen tearing or flickering..
  • ⚡【16K@60Hz & 4K@165Hz】The resolution of this nylon braided 16k displayport cable can fully support 16K@60Hz with DSC, 10K@60Hz, 8K@60Hz, 4K@240Hz/165Hz/144Hz/120Hz. And it is also support Dynamic HDR, HDCP 2.2, 3D, ARC, etc. Flawless audio pass-thru for uncompressed digital 7.1, 5.1 or 2 channels.*Note: Please don't use the extension dp cord, multi-transfer will result in DP signal loss..
  • ⚡【Topnotch Design】The connector interior of the dp 2.0 cable is made of armour tinplate. It is extremely resistant with EMI. Built in 6N 26AWG oxygen-free copper conductor and ....
Check Stock

AudioControl DQDX Black 6 Channel Performance Digital Signal Processor

  • Six input and output channels with level controls | Independent Front, Rear, and Subwoofer equalization | Fully adjustable 24dB / Octave Linkwitz-Riley selectable crossover.
  • ACR-3 Dash Control Remote Included | Discrete Input and Output level controls with clipping indicators | 12-volt Remote Turn On Output | Built in Pink Noise for easy Signal Delay and Equalizer tuning and system set-up.
  • Total Harmonic Distortion: 0.01% | Frequency Response: 10Hz-22kHz | Equalizer Frequencies (front/rear): 125Hz, 175Hz, 250Hz, 500Hz, 1kHz, 2kHz, 8kHz | Equalizer Frequencies (sub): 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100HZ, 125Hz.
  • PFM Frequency: 20Hz or 30Hz selectable | Crossover Frequency: 50Hz-500Hz selectable | Signal Delay Max (Left/Right): 10ms | Signal Delay Max (Front/Sub): 35ms.
Check Stock

AudioControl DQDX Black 6 Channel Performance Digital Signal Processor

  • Six input and output channels with level controls | Independent Front, Rear, and Subwoofer equalization | Fully adjustable 24dB / Octave Linkwitz-Riley selectable crossover.
  • ACR-3 Dash Control Remote Included | Discrete Input and Output level controls with clipping indicators | 12-volt Remote Turn On Output | Built in Pink Noise for easy Signal Delay and Equalizer tuning and system set-up.
  • Total Harmonic Distortion: 0.01% | Frequency Response: 10Hz-22kHz | Equalizer Frequencies (front/rear): 125Hz, 175Hz, 250Hz, 500Hz, 1kHz, 2kHz, 8kHz | Equalizer Frequencies (sub): 31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100HZ, 125Hz.
  • PFM Frequency: 20Hz or 30Hz selectable | Crossover Frequency: 50Hz-500Hz selectable | Signal Delay Max (Left/Right): 10ms | Signal Delay Max (Front/Sub): 35ms.
Check Stock

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-2 2000W Rms)

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

VESA Certified DisplayPort 2.0 Cable 6ft, FURUI Nylon Braided 16K DP 2.0 Cable, Supports 80Gbps, 16K@60Hz, 10K@60Hz, 8K@120Hz / 60Hz for Laptop, TV Gaming Monitor

  • 【Free Lifetime Warranty】Free Lifetime Replacement or Refund if you have any quality issue, please feel free to contact us through Amazon.1,Find your order ID. 2,Click button "Contact Seller"..
  • 【80Gbps High Speed】The transmission rate of this nylon braided displayport cable 2.0 is up to 80Gbps. No delay and no signal loss. 3X faster than displayport cable 1.4. 16K DP 2.0 cable meets the VESA Standard and supports Dynamic HDR 4:4:4 / HDR 10 and HDCP 2.2. Plug and play. Works with DP, DP++, and DisplayPort++. FEC forward error correction. UHBR10 and UHBR13.5 supported. *Note: Please don't use the extension cord..
  • 【16K@60Hz & 8K@120Hz】FURUI displayport 2.0 cable support 16K@60Hz with DSC, 10K@60Hz, 8K@120Hz/60Hz, 4K@165Hz/144Hz/120Hz/60Hz. Single-screen video output of 16K@60Hz (DSC), 10K@60Hz and dual-screen 8k@120Hz/4K@144Hz, three-screen display for 10K@60Hz. And flawless audio pass-thru for uncompressed digital 7.1, 5.1 or 2 channels..
  • 【Upgraded Structure】FURUI dp 2.0 cable has a triple shielded & tinplate, it is highly resistance with EMI. The conductor is made of 26AWG OFC. Its has a strong nylon braided jacket, which is 10X more durable than PVC. Tolerance a 16,000+ bend lifespan. It can provides higher connectivity for the signal tra....
Check Stock

CORSAIR FORCE Series MP500 120GB NVMe PCIe Gen3 x4 M.2 SSD Solid State Storage, Up to 3,000MB/s

  • The CORSAIR NVMe PCIE boosts bandwidth, allowing you to access all of your data, load files and launch games with speeds up to 4x faster than the SATA 3.0.
  • CORSAIR NVMe M.2 SSDs enable a new level of performance in a compact form-factor. NAND Technology : MLC NAND.
  • Additional error bit correction and improved data retention, while supporting the latest generation NAND.
  • Additional protection to enhance reliability and extend life of the drive.Compatibility:M.2 2280 Interface Connector Windows 10, Mac OS X.
  • Vibration: 20Hz~80Hz/1.52mm, 80Hz~2000Hz/2.
Check Stock

Sundown Audio SAE-2000D V.3 Monoblock 2000W RMS Digital Class D Amplifier SAEv3-2000D

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

2.2KW Water Cooled Spindle Motor ER20 24000rpm 400Hz+2.2KW VFD Inverter Variable Frequency Driver 110V+80mm Clamp+80W Pump+6m Pipe+14pcs Collet CNC Kit for CNC Router Engraving Milling Machine

  • ♞【2.2KW Water Cooled Spindle Motor】Operating Speed:0-24000rpm.
  • ♞【2.2KW Inverter VFD 110V】Input Voltage: 110V(+/-15%).
  • ♞【80mm Clamp】Diameter: 80mm Material: Aluminum,Cast aluminum.
  • ♞【80W Water Pump+6M Pipe】Pump length:3.2m.
  • ♞【14Pcs ER20 collet】Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.
Check Stock

Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer with Sub-Output, Grey

  • Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output. Dual channel (31 bands per channel). Variable stage low and high cut filters..
  • 1/3 octave filter sets (ISO centers). 20 Hz to 20 kHz effective equalization range. Constant Q filters. Selectable 6dB or 12dB cut or boost range. Output level LEDs (-10 to +17 dB)..
  • Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Channels: 2 (stereo). Connectors: XLR balanced inputs and outputs. Bands: 31 per channel..
  • Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz.
  • Control Range: Selectable +/-12dB 0r +/-6dB. Input Impedance: 50k ohms. Output Impedance: 600 ohms. Maximum Output Level: +21dBLevel Control: +/- 10 dB. Signal to Noise: 003e93 dB. Distortion: 0.005%..
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

Rockville REQ215 Dual 15 Band 1/3 Octave Graphic Equalizer with Sub-Output

  • The Rockville REQ215 is a Dual Channel 30 Band (15 bands per channel) rack mountable EQ. Dual channel (15 bands per channel). Switchable 12 Band or 6dB boost/cut range..
  • 80Hz 24dB low cut filter. 2/3 octave filter sets. 25 Hz to 16 kHz effective equalization range. Constant Q filters. Output level LEDs (-12 to +17 dB). Low cut filter switch with status LED..
  • XLR inputs and outputs for balanced operation. Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Subwoofer X-Over Freq ( 30Hz - 200Hz ) selecting..
  • Connectors : XLR balanced inputs and outputs. Ground lift switch. Frequency Centers : 31.5 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz, 400 Hz, 500Hz, 630 Hz, 800 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz..
  • Input Impedance : 20k ohms. Output Impedance : 1.5k ohms. Maximum Output Level : 11 VAC. Level Control : +/- 12 dB. Signal to Noise : 90 dB. Distortion : 0.03%. Power : 120 Volt..
Check Stock

MUSYSIC MU-CO4W PROFESSIONAL 2/3/4-WAY AUDIO STEREO SOUND PROCESSING CROSSOVER

  • Frequency Response: 20Hz-25kHz (1dB) / Low Cut Filters: 30Hz / -3dB, 12dB/Octave / Signal-to-Noise Ratio: 80dB.
  • Unbalanced XLR 1/4" input jacks / Balanced XLR, 1/4" outputs.
Check Stock