Top 90 Magnetic Sensor

Digi-Pas DWL200 Electronic Torpedo Level, Protractor, Angle Gauge, Angle Finder, Bevel Gauge, Magnet, 0.1°, 7 inch

  • DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
  • EASY USER RE-CALIBRATION back to factory setting with no special fixture required.
  • RESOLUTION: ±0.1° (0° & 90°), ±0.2° for 1° to 89°, switchable display between degrees (°) or slope (%).
  • STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
  • improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
  • Auto invert display when gauge is upside down . BUZZER SOUNDS at 0 degree and any set angle.
  • HOLD BUTTON to allow user freezing display for ease of reading. Measurement Range 0° ~ +/- 90° x 4 (360°).
Check Stock

SECRUI Door Chime – Door Entry Chime for Front Door – Wireless Door Sensor with 52 Chimes Flash Lights Adjustable Volume Levels – Door Ringer for Business/Office/Home Entry – Over 500ft Coverage

  • 【Wide Working Range】:This wireless door open chime for home is up to 400 ft in open area, magnetic door sensor will automatically trigger the receiver when the magnetic strip is separated and the receiver will alerts immediately whenever the door or window is opened.
  • 【24/7 Lifeguard for Your Family】This business door entry chime alerts when burglar opens door and helps deter break-ins(wireless door alarms activates when magnetic sensor separates).
  • 【Mini Contact Sensor】Door alarm sensor (size: 3.0 x 1.0 x 0.60 inch), magnetic strip (size: 1.7 x 0.6 x 0.4 inch). They are small size and can be installed or placed at any indoor position to provide you with a door entry chime/alert system..
  • 【52 Music with Mute to Loud dB】This door entry alert for business has 5 levels of adjustable volume from 0-110 dB.Offer 52 elegant music from the traditional"Ding Dong" to various well know chimes.Memory function: Keep the previous setted tune after re-plugging it.
  • 【Easy to install】Just plug the doorbell receiver into any standard outlet and tear the double- sided adhesive tape which on the back of door sensor( or screw mounted) and stick them to the door or window is fine,please take the insulating paper away before using the sensor..
Check Stock

jing Magnetic Reed Switch MC-31B NC & NO Surface Mount Door Window Alarm, Magneti Door Switch, Contact Sensor, for Home Security and Burglar Alarm Magnetic Reed Switch,Sets of 5

  • Product Name: Magnetic Door Contact Reed Switch.
  • Product Size: 55 x 12.5 x 11mm / 2.2" x 0.49" x 0.43"(L*W*H).
  • Mounting Hole Size: 7 x 2.5mm/ 0.28" x 0.1"(L*W)..
  • Contact Capacity: 500(mA) (Maximum Switch Current), Rated Power: 10W(Maximum Switch Power).
  • Contact Type: NC/NO/COM,Trigger Range: 15-25mm..
  • Application: Magnetic door contact reed switch great for door alarm sensor, alarm, LED Switch, Relay, GPS low voltage devices...etc., Effective for Theft Deterrence. Yes ideal wooden door or window use..
  • Package Content: 5Sets x MC-31B Magnetic Door Switch,Some Mounting Screws. Have our worry-free 90-daywarranty and friendly customer service..
Check Stock

BLACK+DECKER LEDUC9-2REC Rechargeable Under Cabinet Light Motion Sensor On/Off, Warm White LED, Stick-On Install for Kitchen & Closets, 2 Count(Pack of 1), Silver

  • Bright, 90 lumens include dimmer function with three brightness levels.
  • Built-in lithium-ion battery provides up to 30 hours of lighting with a single charge.
  • 3 Settings: On, Off and Automatic lighting with darkness and motion sensor.
  • Automatic lighting with darkness and motion sensor.
  • Magnetic stick-on mounting clips for frustration-free setup and quick re-charging.
  • Simply peel and stick to seamlessly illuminate cabinets, kitchens, closets and more.
  • Super slim bar design with 0.375" profile.
Check Stock

Metal Detector FREE - turn your phone into magnetic field meter

  • Metal Detector PRO is an extremely useful application for your android phone.
  • Application Metal Detector PRO uses built-in magnetometer that can measure electromagnetic field (EMF) level in your surroundings..
  • This application detects electromagnetic fields there around your smart phone and tells you if there are metal close..
  • Meta Detector app uses built-in magnetic field sensor. Please check in your phone specification if your device is equipped with one..
  • The app detect ferromagnetic metals which means that only detects those which generate magnetic fields..
  • The metal detector app works also through walls so it can detect hidden electrical wires, studs and metals..
  • The magnetic field intensity is presented on a magnetic field intensity chart..
  • The magnetic field meter will play sound and vibrate if magnetic field generation object are detected in proximity of the app..
  • Please note that the accuracy depends entirely on the magnetic sensor (magnetometer) in your device and might be affected by electromagnetic waves generated by nearby electronic equipment..
Check Stock

Yiming Magnetic Thermostat Switch with High Temperature Resistant Wire for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace, Circuit On At 120°F and Off At 90°F.

  • ★ Universal Fit - The magnetic thermostat on/off switch with high temperature resistant wire, used in universal wood stoves, fireplace blower kits, gas log firplaces. Such as Heat N Glo, Heatilator, Majestic, Desa Tech, Regency fireplace..
  • ★ Very Easy to Install - The fireplace thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox..
  • ★ Turns On and Off Automatically - Automatically turns fireplace on and off at set temperature of thermostat switch, you don’t require manual star, adjustment, stops..
  • ★ The wood stove fan limit switch activate (turn on) at approximately 120°F and shut off at approximately 90°F (+/- 5°F tolerance)..
  • ★ What You Get: 1 Magnetic Thermostat Switch and 2 High Temperature Wire for fireplace blower fan kit. The wires is constructed with female connectors on both ends, built-in enameled copper and PVC jacket to ensure extra protection and durability..
Check Stock

Fielect 5pcs MC-31 Surface Mount Wired N.O. Door Contact Sensor Alarm Magnetic Reed Switch White

  • Producat Name: MC-31 Magnetic Door Sensor.
  • [Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
  • When the magnet together, the circuit is not conductive ( light off )..
  • [Widely Usedl] - This surface mount wired door contact Sensor works with any access control or burglar alarm system available.
  • [Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.
  • [Package Included] - 5Pcs x MC-31 Surface Mount Wired Magnetic Door Sensor.
Check Stock

Hxchen RC-35 NC & NO Wired Magnetic Door Window Contact Sensor Switch Contact Sensor Alarm Magnetic Reed Switch White - (5 Sets)

  • 【Application】: Magnetic door contact reed switch is great for door alarm sensor, low power switch, LED Switch, door contact..
  • 【NC&NO Combined】: Use Normally Open or Normally Closed freely. Cable definition: White for common.
  • 【Dimension】: Overall Size(Approx.) : 25 x 12 mm / 1" x 0.47" (H*D).
  • 【Package】: 5 Sets x Magnetic Door Contact Sensors.
  • Contact Capacity : 0.5A(Maximum Switch Current).
  • 【Hassle-Free Warranty】: Hxchen guarantee high quality and good service. Here with our 90-day money back risk-free purchase guarantee, order now! If you are not satisfied in any way, Refund or Replacement for any quality problem..
Check Stock

Hipoilk FK21 GFK21 GFK21A Fireplace Blower Fan Kit for Heatilator Fireplaces

  • Includes Components: The GFK21B fireplace blower kit is easy installation and includes all of the components you'll need to successfully install a blower into your fireplace for the first time. Includes fireplace blower fan, full range rheostat variable speed controller, automatic thermostat sensor with magnetic bracket, heavy duty grounded 3 prong power cord, wire harness set, noise reduction padding, installation instructions, 1 year warranty.
  • Features Of The All Components: The GFK21 blower is constructed of high grade materials and is engineered to operate smoothly, efficiently and last a long time. The Heatilator GFK21 blower kit also includes a full range variable speed controller that mounts conveniently below your fireplace, as well as a magentic thermostat sensor that automatically controls when the blower turns on and off. Noise reduction padding is added to reduce posibility of metal on metal contact..
  • Compatibility: Fits Heatilator EDV3633, EDV3633I, EDV3633IL, G136, GNBC30, GNDC30, GNDH30, GNRC30, GNRC30E, GNRC30L, GNRC30LE, GNRC30LEB, NB3630, NB3630M, NB3630MI, NBV3630, NBV3630I, ND3630, ND3630I, ND3630IL, ND3630L, ND3630M, ND3630MI, NDV3630, NDV3630I, NDV3630IL, NDV3630L, NEVO3630, NEVO3630I, NEVO4236, NEVO4236I, NNXT3933, NNXT3933I, NNX....
Check Stock

Assistant Sensor, 12 Magnets 12 Pulses Per Revolution E-Bike Assistant Sensor Speed Sensor for Electric Bicycle Pedal

  • 【Make Cycling Easier】Electric bicycle speed sensor (known as PAS, wheel mounted sensor), power assist, make cycling easier and funnier.
  • 【Feature】12 magnetic, 12 Pulses Per Revolution, Both forward and reverse can be activated when matching a single Hall sensor.
  • 【Working Principle】pedal assist sensor employs the dual-magnetic loop - Hall elastic angle difference to detect the dynamic torque, which is converted to DC signal and sent to the controller.
  • 【Component Designed 】It is a high-tech component designed for electric bicycle with ergonomics. assistant speed sensor has superiority to match well with all electric bicycles available in the market.
  • 【Good Service】If you have any question, please feel free to contact us. We will do best to help you.
Check Stock

TSL1401CL Linear Sensor 128X1 Linear CCD Camera Sensor Ultra Wide Angle Lens 120 Degree Black and White Line Tracking Module

  • BASIC SPECIFICATIONS: With sensitivity pure tones , field cut and signal output, circuit board output switch (can be directly passed through the microcontroller).
  • MULTIPLE OUTPUTS: The linear magnetic sensor switches has signal output indication, single signal output, active low signal output.
  • IDEAL CHOICE: This linear magnetic sensor switches is ideal for temperature control, proximity switches, alarm detection or rotate encoders.
  • WITH SENSITIVITY: Universal sensor module with potentiometer to adjust the sensitivity of the sensor, provides analog and digital output.
  • HIGH COMPATIBILITY: With A3141 chipset, 49E linear effect sensor, LM393 dual differential comparator, potentiometer, 2 LED and 6 resistors, fully compatible with standard microcontrollers.
Check Stock

Metal Detector PRO - turn your phone into magnetic field meter and magnetism tester with electromagnetic field app

  • Metal Detector PRO is an extremely useful application for your android phone.
  • Application Metal Detector PRO uses built-in magnetometer that can measure electromagnetic field (EMF) level in your surroundings..
  • This application detects electromagnetic fields there around your smart phone and tells you if there are metal close..
  • Meta Detector app uses built-in magnetic field sensor. Please check in your phone specification if your device is equipped with one..
  • The app detect ferromagnetic metals which means that only detects those which generate magnetic fields..
  • The metal detector app works also through walls so it can detect hidden electrical wires, studs and metals..
  • The magnetic field intensity is presented on a magnetic field intensity chart..
  • The magnetic field meter will play sound and vibrate if magnetic field generation object are detected in proximity of the app..
  • Please note that the accuracy depends entirely on the magnetic sensor (magnetometer) in your device and might be affected by electromagnetic waves generated by nearby electronic equipment..
Check Stock