Top 90 Degree Straight Elbow

4 Pack 304 Stainless Steel Mandrel Bend Elbow, 90 Degree Exhaust Elbow Pipe, 2.5 Inch OD Mandrel Elbow, Thickness 16GA/.065" for Car Modified Exhaust Elbow Pipe, Stair Handrail, Exhaust System

  • 2.5" Mandrel bend elbow suits for exhaust system, intake system, sanitary pipe connection, car modified exhaust elbow pipe, stair handrail, etc..
  • 4 Pack x 2.5” Stainless Steel Mandrel Bend Elbow 90 Degree Bend Elbow..
Check Stock

Ancona AN-5317 Comfort 7 7-Bar Wall Mount Hardwired Towel Warmer in Chrome

  • Carbon-steel construction with Chrome finish.
  • 7 straight horizontal bars in sleek styling.
  • Installs directly into Concealed electric junction box, with 90 degree elbow and wall plate to hide wire connection.
  • With on/off switch reaches its preset ideal temperature in 15 minutes.
  • Engineered with dry-lined electric power for safety and energy efficiency.
Check Stock

OTC 4512 Stinger Internal and External Snap-Ring Pliers - 8 Piece Set

  • OTC's heavy-gauge, tempered steel snap ring pliers feature a simple thumbscrew for conversion from internal to external snap rings.
  • Includes two stainless steel handled picks and a sturdy blow molded plastic storage case.
  • Set contains: No. 4512-1 Straight Pliers with .090 inch tip, No. 4512-2 90 Degree Pliers with .090 inch tip, No. 4512-3 Straight Pliers with .070 inch tip.
  • No. 4512-4 - 90 Degree Pliers with .070 inch tip, No. 4512-5 Straight Pliers with .047 inch tip, No. 4512-6 90 Degree Pliers with .047 inch tip.
  • 4512-7 Straight Pliers with .038 inch tip, No. 4512-8 90 Degree Pliers with .038 inch tip, No. 4512-9 - Straight Tip Pick, No. 4512-10 - 90 Degree Tip Pick.
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ...t (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesive silicone seals create a good seal between the pipes and fittings, which can prevent th....
Check Stock

Central Vacuum 4-Inlet Installation Kit 100 feet of Pipe All in a Box

  • ✅ Fits all brands: Nutone, Honeywell, Ultra Clean, Prolux, Beam, Electrolux, Eureka, Hayden, Allegro, AirVac, Vacuflo, MD & many more.
  • ✅ You will receive 4 X STANDARD NEW DESIGN TRENDY FULL DOOR VALVES INLET WALL VALVE, white color, 4 X Mounting Plate (for the valves), 12 x 90 Degree Sweep Elbow, 8 x 45 Degree Elbow, 12 x Stop Coupling (to join the 2” pipe together).
  • ✅ 3 x 90 “Y”, 4x 90 Sharp Elbow, 8 x pipe strap, 1 x wire (125 ft), 1 x Solvent Cement (125 ml).
  • ✅ 100 ft Pipe (in 4 ft lengths) - Central Vacuum Standard 2" O.D. PVC pipe. - Printed centre-line is provided for ease of installation.Low internal surface air friction. - ASTM F-2158 Approved. This item is offered in a box of 100 foot. - The actual pipe length is 48" (121 cm).
  • ✅ Amazon's choice for suggested central vacuum package (not included in this listing) is shown in one of the pictures: https://www.amazon.com/dp/B01ND02528.
Check Stock

6\ Adjustable Duct Elbow 90 Degree HVAC - 26 Gauge galvanized sheet metal duct connector, for flexible round tube air ventilation & vent pipe ductwork collar piping ducting fitting

  • HVAC adjustable 90-Degree elbows are used to make turns in runs of round pipe and flexible duct from O (straight) to 90 degrees. Our elbow is made of sturdy high-quality galvanized steel construction and are simple to adjust..
Check Stock

Installation kit for Wall Mount Commercial Faucet,backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

  • 【INSTALLATION KIT FOR BACKSLASH MOUNT】This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink.
  • 【1/2 IPS STRAIGHT THERAD】it is NOT 1/2 NPT,it's 1/2 IPS which is also called G1/2,fitting wall commerical faucets with G1/2 female end.
  • 【LEAK FREE】its one-piece construction for no leaking.
  • 【EASY TO INSTAL】Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet.
  • 【SOLD IN PAIR】comes with 90 degree angled elbow joint x 2,lock nut x 2,plastic washer x 2 and rubber washer x 2.
Check Stock

Appliance Pros Washer Inlet Hoses 4 Foot

  • ONE PAIR of 304 stainless steel braided premium washing machine hoses 8ft long each with 3/4" 90 degree elbow connection. Red lined for HOT water and....
  • BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for....
  • INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
  • UNIVERSAL FIT - Our hoses connect to all washing machines with industry standard 3/4" 90 degree elbow FHT(Female Hose Threaded) or FGH(Female Garden....
  • MONEY BACK GUARANTEE - We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality....
Check Stock

90 Degree Dryer Close Elbow Vent Tube Connector，Metal Elbow Connector for HVAC Duct Ducting Pipe or Hose Ductwork, 4\

  • ... of elbow connector. This ideal connect with most pipe, most commonly used in HVAC appliance venting, especially clothes dryer or bathroom venting. You must make sure that your your pipe size matches this one before purchasing. This is very important important important..
  • ✔ [Venting Kit Assembly Included] : 1 X 90 Degree Elbow. Solving the problem that pipe linking with steering. makes it very versatile..
  • ✔ [Simple Install by Yourself] This elbow connector is simple to connect with pipe. Fitting perfectly with any other 4” pipe, vent and connector, just push the elbow connector into the pipe and fittings together. Easy to use DIY and it’s a perfectly designed product for home improvement..
  • ✔[Premium Quality Affordable] 4" diameter 90 degree duct elbow connector is so lightweight and made of flame resistant steel and long durability. It is the best way to ensure better air circulation at your home. You don't have to compare other prices and quality. Buying directly is the best option..
  • ✔ [Best Choice With Confidence] This LG venting kit is a perfect choice for you, There is no reason for 100% refund or exchange within 30 days. We will provide you a 100% satisfaction guarantee. We believe these will fit perfectly and matches as....
Check Stock

Funmit STV-90 Dryer Duct Connector - 90 Elbow Dryer Hose Snap - Indoor Hook-up Dryer Vent Kit fit 4in vent ducting

  • ...p can provide your dryer with more efficient and stable exhaust function . Robust material extends the life of the dryer vent connector.
  • 【WIDE COMPATIBLE】- Use our newest STV-90 dryer duct connector design, it measures 5.5 in x 6 in x 4.25 in. You can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match, suitable for all brands of dryers on the market.
  • 【SHOP WITH CONFIDENCE】- Funmit adhere to provide all customers with a simple, streamlined shopping experience of large appliance replacement parts, and prove that we have the highest quality parts and service out there. We stand by our products, and our customers are our focus as a business. If you have any quality problem during warranty period, please contact Funmit customer service team in time, and we will try our best to solve your problems.
Check Stock

Performance Tool W5215 Performance Tool SAE/MET Grease Fitting Assortment - 70 Piece

  • METRIC FITTINGS: 6 mm – 1 Straight (10 pcs).
  • CASE: Convenient re-sealable container for storage and transport.
  • Overall size: 23 7/8-inch x 25-inch x 31-inch.
Check Stock