Top 9jeep Cherokee Winch Bumpers

SCITOO Spare Tire Hoist Spare Winch Carrier Compatible with 2005-2010 for Jeep Grand for Cherokee 924-535

  • Compatibility - SCITOO Spare Tire Hoist Spare Winch Carrier is applicable to 2005-2010 for Jeep Grand for Cherokee..
  • Function - This tool is specifically engineered to match the original design and function of the spare tire winch carrier hoist which holds the spare....
  • Features - The reel that raises the spare tire is driven by a set of worMGears in the worMGear drive. The worm is connected with the rocker. When the....
  • Replace Number - 924-535/52089369AC, 52089369AD, 52089369AI. 1x Spare Tire Winch Carrier Hoist..
  • Attention- Before placing an order use the specific year,make, model in the Amazon Garage to ensure this item fit your exact vehicle..
Check Stock

Mercedes-Benz The 1960s W111 and W112 Coupes/Cabriolets with buyer s guide and chassis number data card explanation From the 220SE Coupe to the 280SE 3.5 Cabriolet updated in March 2018

  • Compatible with 1984-2001 Cherokee XJ / 84-01 Comanche MJ. Only 96 and earlier require factory fender trimming..
  • Nicely coated, very strong and the lights give it a great look. The recovery shackles and mounts are nice and strong. These are more than worth the....
  • This rock crawler bumper's benefit is the bolt on stinger bar, which will help to prevent your Cherokee from flipping forward when coming down off an....
  • Designed with the adventurous off-roader in mind, this bumper features a built-in winch plate that is capable of supporting a 12,000 lb. winch. Loaded....
  • Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
Check Stock

Rough Country Winch Hook Mount | Hawse Fairlead - RS140

  • The hawse fairlead is made of high quality billet aluminum.
  • The package includes necessary mounting hardwares screws and nuts for most bumpers.
  • This winch fairlead can prevent the synthetic rope from binding up and then to reduce synthetic rope damages, to prolong the life of synthetic ATV and UTV winch ropes.
  • Compatible with most winches (load capacity: 8000lbs to 15000lbs).
  • The rounded smooth edge on the fairlead front can make the rope run through smoothly when use this aluminum hawse fairlead with synthetic winch ropes..
Check Stock

SuperATV Black Ops 2500 LB Winch Kit for UTV/ATV | Includes 50 Ft. Synthetic Rope | 12 Volt Winch | 1 HP Motor | Waterproof Seals and Solenoid | 166:1 Gear Ratio

  • ✔️ 【Fits】Fits most bumpers or winch mounts with a 3.0" x 4.87" (76 x 124mm) mounting bolt pattern | Please Note: Requires machine-specific mounting plate or winch ready bumper (sold separately).
  • 【Versatile】Do you need the ultimate 2500 Winch for your UTV or ATV? Our SuperATV Winch is one you can count when you’re going deep in mud, creeks, and bogs! This winch won't corrode like steel, and is easy to handle. It’s tough because you need it to work every time you hit the button..
  • 【2500 LB Winch】 With SuperATV’s 2500 Lb. Black Ops Winch, you get the compact power your ATV or lightweight side-by-side needs to pull out of any situation and get back to riding. Now there’s nothing that can stop you. | 12V 1-Hp Dc Motor, 2500 Lb. rated line pull synthetic 50' rope, and 166:1 gear ratio.
  • 【Kit Includes】2500 waterproof ATV Winch / UTV Winch, 50' synthetic rope, handlebar rocker switch, heavy-gauge wiring and waterproof solenoid, aluminum hawse fairlead-4.3' (109 mm), winch hook kit, hook pull strap, rope stopper, automatic brakes to hold the spool on inclines, and all hardware ....
Check Stock

Tyrannosaurus 5000 lb ATV/UTV Electric Synthetic Winch Kit with Wireless Remote Mounting Plate

  • Powered by 1.8 horsepower motor with exquisitely designed 3-stage 166:1 planetary gear system, contribute to efficient pulling.
  • The winch with a stronger black frosted shell and equipped with waterproof IP66 rating and state-of-the-art 330AMP solenoid valve.
  • This 6.5 x 4.13 inches aluminum hawse fairlead owns a longer servicing life and a smooth and flat surface, it is more convenient to manage the rope....
  • 26-32 feet wireless remote range with weather-sealed solenoid.
  • From snow plowing, outdoors hunting to stacking wood, towing equipment, there's an endless list of accessories to your vehicles.
Check Stock

SuperATV Black Ops 6000 LB Winch Kit for UTV/ATV | Includes 50' Synthetic Rope | Permanent Magnet DC 12V, 1.9 HP Motor and More!

  • ✔️ 【Fits】Most bumpers or winch mounts with a 3.0" x 6.6" (76 x 168mm) mounting bolt pattern. Note: Requires machine-specific mounting plate or winch ready bumper (sold separately) | Instructions can be accessed through QR code on through Manufacturer's website..
  • 【Synthetic Rope】Rope bends easily, same strength as steel cable. and won't rust or corrode..
  • 【6000 LB Winch】 If you get your UTV or ATV in rough situations, you need a 6000 Lb. Black Ops Winch to handle it. | Permanent Magnet 12V 1.9 Hp Dc Motor | 6000 Lb. rated line pull synthetic 50' rope | 266:1 Gear Ratio | Winch Dimensions (Lxwxh) = 14.56” X 4.41” X 4.86”.
  • 【Kit Includes】6000 lb. Black Ops Winch, 50' synthetic rope, wired dash rocker switch, fairlead support bracket, winch hook kit, automatic brakes, hook pull strap, rope stopper, aluminum hawse fairlead- 6.0" ( 152.4 mm), heavy-gauge extended wiring and water proof solenoid (long enough for four-seaters), and all hardware for ease of installation! | Automatic shut off.
  • 【Everything You Need】Built to be wat....
Check Stock

Hooke Road Wrangler JK Front Bumper + Rear Bumper Combo w/All LED Lights Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors

  • Fitment - Hooke Road front & rear bumper combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors Sahara Rubicon Sport.
  • Winch Plate & Hitch Receiver & D-rings - Two solid D-ring shackle mounts are welded into bumpers from the inside and outside for increasing strength. 4.75 ton capacity D-rings (9500lb. rated) included. (Front Bumper) built-in winch plate for up to 12,000 lb. (winch not included). (Rear Bumper) built-in hitch receiver for up to 9500 lb..
  • Heavy Duty Construction & Corrosion Resistance Finish - The bumpers are manufactured from durable 1/8" steel sheet and 1.9"X0.06" steel tubing. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance.
  • Easy Bolt-on Installation - Desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation. (Installation instruction included).
  • Package Include - 1 x wrangler jk front bumper.
Check Stock

Hunter GF-818 Grille Guard Bumper Push Bars Compatible for 2015-2020 Ford F-150 (2X2, 4X4, 4WD) – Powder Coated Black

  • RockTrix Front Bumper Brush Guard, Winch Guard. Made of high strength steel. Grille guard protects the grill and winch against damage from road and offroad debris. Electrophoretically coated in Satin Black for superior protection against corrosion..
  • Compatible with 2018+ Jeep Wrangler JL with factory Mopar Steel Bumper. Compatible with 2019+ Jeep Gladiator JT with factory Mopar Steel Bumper. Compatible with 82215351..
  • Fast and easy installation. Uses existing factory bolts. No drilling needed. Installation time less than 15 minutes..
  • Note: Not compatible with JL Wranglers/Gladiators with plastic bumper, or aftermarket steel bumpers. This product is only compatible with factory mopar steel bumpers.
  • Includes 1 Year Warranty replacement against corrosion damage or other manufacturer defects..
Check Stock

2 Pack New Aftermarket Rear Hatch Bumper Stops Replaces 55254847 / 45390 Compatible with Jeep Cherokee Grand Cherokee

  • Compatible with Jeep Models ~ Comparable to Dorman and Mopar.
  • Replaces the following Part Numbers: Dorman #: 45390 / Mopar #: 55254847.
  • Fits the following years, makes and models: 1997-2001 Jeep Cherokee XJ / 1994-1998 Jeep Grand Cherokee ZJ.
Check Stock

EAG Assembled Front Bumper with LED lights Compatible with 1999-2004 Grand Cherokee WJ

  • FITMENT - Fit for 1999-2004 Grand Cherokee WJ..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000lbs. winches. High strength D-ring mounts are welded on both inside and outside. Two 4.75 ton D-ring shackles and black isolator included..
  • LED LIGHTS - Two 12W LED Lights, integrated LED models and wiring harness included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet. Textured black powder coat finish..
  • EASY INSTALLATION - EAG modular front bumper is engineered to be a direct bolt-on upgrade replacement for your vehicle original stock bumper reusing the factory mounting points..
Check Stock

Smittybilt 76721 SRC Gen1 Front Bumper for 1987-2006 Jeep Wranglers

  • Heavy-duty bumpers are designed for off-road use and abuse..
  • Sloping ends for greater tire travel and enhanced entry and exit points.
  • One-piece welded design, manufactured from 2" x .120 wall tube.
  • Solid mount D-rings – welded on the inside and out.
  • Wide front opening allows for winch installation (NOTE: requires Winch Plate #2803).
Check Stock

YaeKoo 10 Billet Polished Aluminum Hawse Fairlead Load Capacity 8000-15000 LBs with Mounting Hardware for Synthetic Winch Rope Black 10

  • The hawse fairlead is made of high quality billet aluminum.
  • The package includes necessary mounting hardwares screws and nuts for most bumpers.
  • This winch fairlead can prevent the synthetic rope from binding up and then to reduce synthetic rope damages, to prolong the life of synthetic ATV and UTV winch ropes.
  • Compatible with most winches (load capacity: 8000lbs to 15000lbs).
  • The rounded smooth edge on the fairlead front can make the rope run through smoothly when use this aluminum hawse fairlead with synthetic winch ropes..
Check Stock