Top A c Clutch Removal Tool

HaroldDol AC Air Compressor With Clutch YCC257，Air conditioning compressor Replacement For 2011-2016 F250 F350 F450 F-550 6.7 6.7 Diesel

  • 【APPLICATION】B A/C Compressor Clutch Remover Installer Puller Tool Kit, is used to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors and fit for GM, fit for Ford, fit for Chrysler, imports, and others.
  • 【EASY TO USE】Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads.
  • 【HIGH-QUALITY】A/C Compressor Clutch Remover is made of stainless steel with a black coated finish, durable and long lasting.
  • Resists rust and corrosion under proper care and lubrication.
  • 【PACKAGE INCLUDED】This kit includes puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • 【CARRYING CASE】Comes with a carrying plastic carrying case for easy organization, storage, and transport.
Check Stock

2-in-1 Lock Nut Wrench Clutch Lock Nut Tool 20mm/24mm clutch lock nut spanner socket for Crf 600rr 450r 250l

  • STURDY SOLID MATERIAL -- The clutch lock nut spanner is made of solid steel material, sturdy construction, durable in using.
  • DESIGNED FOR LOCK SPANNER KIT -- A special and perfect replace grom clutch removal tool for : Replace special tool: # 07716-0020100,....
  • IMPORTANT DATA FOR YOU TO CHECK -- Large End Inner Diameter: 24mm / 0.94 inch.
  • Large End Outer Diameter: 30mm / 1.18 inch.
  • COMES WITH 4 PIN LOCK NUT SPANNER -- 4-pin socket clutch nut tool, each end has 4 pegs.
  • One side is 20mm inner diameter and another side is 24mm inner....
  • FITMENT -- This clutch nut tool can be used for 14mm clutch lock nut on: crf50, xr200 1980-1984, xr200r 1984-1994, xr250l 1991-1994, xr250r 1986-1994,....
Check Stock

UNIGT Belt Changing Tool with Clutch Cover Removal Tool Kit Replacement for Polaris XP/RZR XP4 1000/RZR S 900

  • Belt changing tool help RZR owner to change a belt, the clutch tool can help you easy to remove the clutch cover.
  • Belt changing tool made by Solid Aluminum Alloy, the clutch tool is dismountable and flexible.
  • A must tool kit for your Polaris RZR: The RZR belt changing tool makes changing your belt easier,and speed up change belts,save the time of Polaris RZR owner.
  • Custom design: This rzr belt removal tool is custom made for Polaris XP/RZR XP4 1000/RZR S 900 etc almost all Polaris rzr belts.
  • Easy to use: the belt changing tool is with an ergonomic handle for a comfortable grip, it’s very easy to changing the belt. It can be rotated 360 degrees..
Check Stock

Powerbuilt Pilot Bearing Puller, Remove Bearings and Bushings, Foreign and Domestic Car Repair, Storage Case - 648619

  • Made to be the most reliable tools in the market today.
  • Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement.
  • Heavy duty puller with 1 1/2-Inch fingers for an extra deep reach.
  • Kit 8 includes 1-Piece for removal of pilot bearing and bushings from the flywheel during clutch replacement.
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
  • PACKAGE CONTENTS: 32mm and 36mm fan clutch removal tool set includes (2) standard size wrenches (32mm and 36mm spanner sizes) and (1) pulley bar.
Check Stock

UNIGT Clutch Cover Removal Tool Compatible with Polaris RZR XP Turbo RS1 Ranger XP 1000 Reversible Belt Changing Tool with Socket Kit Belt Tool

  • Belt changing tool help RZR owner to change a belt, the clutch tool can help you easy to remove the clutch cover.
  • Belt changing tool made by Solid Aluminum Alloy, the clutch tool is dismountable and flexible.
  • A must tool kit for your Polaris RZR: The RZR belt changing tool makes changing your belt easier,and speed up change belts,save the time of Polaris....
  • Custom design: This rzr belt removal tool is custom made for Polaris XP/RZR XP4 1000/RZR S 900 etc almost all Polaris rzr belts.
  • Easy to use: the belt changing tool is with an ergonomic handle for a comfortable grip, it’s very easy to changing the belt. It can be rotated 360....
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

Lisle 14440 Water Pump Wrench

  • More extensive design: 32mm&36mm clutch fan removal tool kit, compatible with a wider range of models than similar products, compatible with most models of BMW, Ford and Mercedes-Benz. And its price is more affordable and better quality. This is a two-piece multifunctional tool that you will like..
  • Application: 32mm&36mm wrench tool is compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and newer models, compatible with Ford..
  • Brand new upgrade tool: 32mm & 36mm Fan Clutch Nut Wrench tool is more practical than similar tools on the market. It has passed rigorous engine tests and is fully fitted, which can save you a lot of money.
  • Quality: This 2-piece fan clutch wrench set is made of high-strength steel, with precise dimensions, and has undergone many actual vehicle tests. The rubber handle covered in the middle helps prevent hand fatigue during prolonged use..
  • Service: ZKTOOL has the most perfect warranty service. We provide all the necessary information for each product. If you have any questions, please contact us. We will wait 24 hours..
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • ... 32 mm or 36 mm (both included) spanner to undo nut.If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar..
  • MUST HAVE TOOL FOR MECHANICS ★- Save yourself time and frustration when removing your clutch fan with this NexADD fan clutch removal tool set.This 32mm& 36mm long-reach wrench and water pump pulley holding tool make replacing your water pump or fan clutch a fast and easy job. The NexADD fun clutch wrench set your best assistant. Just Add To Cart!.
Check Stock

Bonbo T-0151 Rear Clutch Spring Compressor Transmission Tool - 4L60E Low & Reverse Spring Compressor, Compatible with GM 250, 250C, 350, 350C, 700R4, 4L60 & 4L60-E

  • 【Material】Bonbo Rear Clutch Spring Compressor is crafted from quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable..
  • 【Application】Compatible with GM 250, 250C, 350, 350C, 700R4, 4L60 & 4L60-E..
  • 【Function】This Clutch Spring Compressor Tool will remove the Low/ Reverse clutch piston in the rear of the case. Makes removing the clutch spring retainer easy..
  • 【Convenient to Use】This low and reverse spring compressor tool engages the lugs, can push the piston return spring enough to access the snap ring. The whole process takes just a few minutes..
  • 【100% Satisfaction Guarantee】Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this T-0151Rear Clutch Spring Compressor, simply return it for a full refund in 30 days..
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set with Adapter Case Hose for Car SUV Truck

  • PROFESSIONAL TOOLS - On the BMW, this fan clutch wrench will help remove the clutch fan to allow you to access the belts, pulleys, water pump, thermostat and much more. Essential tool kit if you want to DIY some of the basic repairs..
  • BUILT TO LAST - Made of premium CV-Steel, the fan clutch wrench removal tool is heavy and solid enough, well machined and finished, with silver tone. They are able to lock the pulley in place and loosen the fan clutch with no issues at all..
  • WHAT YOU WILL GET - You can get 4 pieces fan clutch wrench including 2pcs 32mm fan clutch wrench and 2pcs water pump pulley holder. They are both 15 inches in length, and 0.24 inch, 0.2 inch in thickness, respectively..
  • WIDE COMPATIBILITY - This tool kit is mainly custom for BMW but not limited to the following models of other brands: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, and S14, S38, S54, S50B30, S50B32..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our water pump holder tool within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedicated to providing you a satisfactory shopping satisfaction..
Check Stock

RZR Belt Changing Tool Compatible with Polaris XP/RZR XP4 1000/RZR S 900 with Clutch Cover Removal Tool Kit

  • ⁂ Fit for⁂ -- This rzr belt removal tool is custom made Compatible with Polaris XP/RZR XP4 1000/RZR S 900 etc almost all rzr belts.
  • ⁂The clutch tool⁂ -- It is a must-have for separating the cover screws, it's flexible so easy to get the cover screws in or out in that tight area.
  • ⁂The RZR belt changing tool⁂ -- Makes changing your belt easier, and speed up change belts, save the time of RZR rider.
  • ⁂Durable to use⁂ -- Belt changing tool made by Solid Aluminum Alloy, de-burring and polishing, accurate control every process. The clutch tool is....
  • ⁂Easy to use⁂ -- the belt changing tool is with an ergonomic handle for a comfortable grip, it’s very easy to changing the belt. It can be....
Check Stock