Top A frame Trailer Jacks

SteadyFast Stabilizer for 5th Wheels, Travel, and Camper Trailers Without Auto Leveling - 2 Foot Plates- Item A

  • Best Performing Stabilizer System, ONLY 60 SECONDS to SETUP, No need to crawl under trailer, No Storage Space Needed, Made in USA,.
  • Only Available in Dark Grey. Permanently installed in 2-3 hours..
  • Works on 5th Wheels and Travel Trailers with existing stabilizer jacks. If your trailer has an auto leveling system Please order our Item C...
  • Eliminates Need for Tripod. Between Wheel Chocks, and Slide Out Jacks or any other parked trailer stabilizers.
Check Stock

Bulldog 500245 Black Universal 6" Trailer Jack Poly Wheel Caster with Pin (1200 lbs. Capacity)

  • For use with Bulldog round tube trailer jacks or wherever a removable caster that fits 2 inch diameter tubing is required.
  • Fits Bulldog trailer jacks rated from 2,000 lbs. to 5,000 lbs..
  • Heavy duty poly wheel with zinc finished, steel swivel mount components.
Check Stock

WEIZE Slide Out Support Jacks - 20.5'' to 38.5'' Slide Out Stabilizers for RV, Camper and Travel Trailer, Supports Up to 4,700 lbs, 2 Pcs

  • GREATER STABILITY - The slide out supports save wear and tear on slide outs by reducing sag, can effectively solve the sagging and bending in the slide-out rails, and also help prevent costly slide out frame repairs. The support stands to help a little bit in the stability of the trailer. But please take note of the warning to "NOT" overtighten the support stands. This could cause damage to your slide out..
  • DURABLE - Heavy-duty steel and zinc powder-coating finish provide maximum strength and longevity for these rust-resisting RV slide out stabilizers. A new folding handle allows jacks in small compartments..
  • ADJUSTABLE DESIGN - The stabilizer jacks support 4,700 lbs. each and adjust from 20.5" - 38.5" H. The 5" dia. circular bases are stable on any surface and resist sink-in. U-shaped tops fit most slide-out frames..
  • EASY OPERATION - 2 per box, easy to operate, no assembly required. From the lowest setting, use the folding handle to raise the bracket slowly to meet the RV slide out supports bars. It is suggested to use concrete blocks or wooden leveling blocks for campers to stabilize the RV slide out jacks on an even surface..
  • WARRANTY - WEIZE aims for quality followed up with quality customer service directly provided by the manufacturer. The item is ....
Check Stock

Andersen Hitches Ultimate Trailer Gear EZ Block Bag 3603

  • Each Ultimate Trailer Gear EZ Block Bag includes the following: 1 EZ Block, 1 Camper Leveler with 1 TUFF Chock, 1 Extra TUFF Chock, 4 TUFF Pads, 1....
  • This 10 piece kit is the perfect accessory set for single axle trailers.
  • Keep 90% of the dirt OUTSIDE of your RV, Trailer, or Home, with the innovative Clean Step! No more dirty, worn-out mats to throw away... and less dirt....
  • The Andersen EZ Block is an extremely strong and durable jack block that is perfect for all bumper-tow trailers. It works with scissor jacks, post....
  • EZ Blocks feature a recessed post hole that helps prevent post jacks from slipping. The EZ Block is designed to resist dirt and oil.
Check Stock

(2-Pack) AR-PRO 6-Inch Boat Trailer Jack Wheels - Universal Fit Black Plastic Caster Wheels - Includes All Mounting Hardware - Suitable for Boat Trailer Jacks with 1 or 2 Wheels

  • 1 PAIR OF CASTER WHEELS FOR BOAT TRAILER JACK - This is a universal replacement for boat trailer jacks. Wheel dimensions are 5 5/8 diameter (6-inch nominal diameter), 2 inches width, and a 5/8 bore hole.
  • DURABLE PLASTIC CASTER WHEELS - Complements the marine boat trailer jack’s durability. Can withstand constant water exposure and can resist wear and abrasion from heavy use. Each caster wheel can support up to 1,200 lbs.
  • INCLUDES BOLTS, NUTS, BUSHING, AND WASHERS - This pack includes 2 caster wheels, 2 short axle bolts (with 2 nuts, 2 washers, and 2 sleeves), and 1 long axle bolt (with 1 nut, 1 washer, and 1 sleeve).
  • CORROSION-RESISTANT HARDWARE - All mounting hardware has a corrosion-resistant finish for enhanced longevity in coastal environments.
  • SUITABLE FOR UNITS THAT USE 1 OR 2 WHEELS - Includes hardware for boat trailer jacks that only require one 6-inch caster wheel and units that use 6-inch dual wheel casters.
Check Stock

RVMATE Stack Jack 4 Pack, for RV, Camper and Trailer Stabilization, Aluminum RV stabilizer, Adjustable from 11 inch to 17 inch

  • Great for supporting a light RV, trailer and camper, offer additional stabilization. Do not use these jacks to lift your RV!.
  • Stack jack can be extended from 11" to 17". We recommend max height of 15" for best performance, prevent jacks being unstable..
  • Just rotate the T-shape rod and extend jacks, easy to set up. You could also place wood and plastic blocks under the jacks to make it more stable..
  • Made of high quality aluminum，water-proof and built to last..
  • With free reusable bag, you could store these jacks easily..
Check Stock

osemar Boat Trailer Jack with Wheel 1500 lbs 6\ Dual Wheels Swivel

  • Small trailer jack wheel, , lifts and lowers your boat trailer, lifting capacity: 1500 pounds, adjustable height: 10-1/2"..
  • Trailer jacks using precision seamless steel pipe, the surface is galvanized, anti-corrosion and anti-oxidation..
  • Boat trailer jack heavy duty thicken and widen, high-load double nylon wheels, loose nut, effortless implementation and high safety..
  • 1500 trailer jack mounting plate and interface are double-layer reinforced, with strong bearing capacity and durability..
  • boat trailer stand crank handle is upgraded, the installation screw cap is detachable, and the handle cover is more convenient to replace..
Check Stock

3/4 Impact Driver Hex Socket Magnetic Nut Driver RV Lift Truck Trailer Stabilizer Leveling Scissor Jack Socket 2pcs

  • ✓ Raise and lower scissors jacks more quickly and easily using power drill torque to raise/lower jacks..
  • ✓ Works on both 19mm or 3/4" Hex Head Scissor Jack RV Trailer Stabilizers..
  • ✓ Reduces time and effort to raise or lower your scissor jacks..
  • ✓ Constructed of heavy duty. 1-year replacement warranty..
Check Stock

Fulton 500320 XP to F2 Adapter Kit for F2 Swivel Mount with 4' Frame

  • Fulton F2 Jack Adapter Plate allows you to upgrade from a Fulton Center-Bolt Swivel Mount Jack to an F2 Series Marine and Recreational Jack.
  • Fits Fulton's patented center-bolt design - used on XP10 and XP15 weld-on jacks.
  • Heavy-duty, cast aluminum mount is tapered, moving wheel closer to center line of trailer frame to optimize castering performance.
  • installs easily - no drilling or welding required.
  • All necessary mounting hardware and complete installation instructions included.
Check Stock

HQRP Toggle Switch Compatible with Ultra-Fab UF38-944014 UF38-944016 UF38-944017 A-Frame Electric Trailer Tongue Jacks 38-75-1037

  • Compatible with: Ultra-Fab UF38-944014 UF38-944016 UF38-944017 A-frame Electric Trailer Tongue Jacks 38-75-1037.
Check Stock

Dumble 5th Wheel Tripod Stabilizer Gooseneck Trailer Jack - 5000lb Cap Adjustable RV Jack Stabilizer RV King Pin Tripod

  • ... Heavy Duty RV Stabilizer Jacks will minimize front-to-back and side-to-side motion so you can enjoy your everyday activities discreetly.
  • [Physics At Work]: Align gooseneck camper stabilizer jacks under the king pin of your camper or motorhome to lift the front end of your trailer and adjust the center of gravity.
  • 5,000-pound (2.5ton) weight capacity adds support and enhances stability.
  • [Built to Last]: Steel RV fifth wheel tripod stabilizer jack is powder-coated to resist elements and provide optimal durability.
  • Zinc-plated chain keeps RV stand legs aligned for optimal strength and reliability.
  • [Fits Your Needs]: 4.5-inch (11.4cm) tall cup has a 3-inch (7.6cm) internal diameter to fit the king pin on your travel trailer, camper, boat, and mobile home.
  • Threaded bar makes it easy to adjust the cup height.
  • [Adjust and Store Easily]: King pin 5th wheel stabilizer jacks adjust to heights between 39 and 57 inches (99.1 x 144.8cm).
  • When not in use, adjustable tripod folds to 7-inch (17.8cm) diameter for easy storage.
Check Stock

Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit

  • ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
  • EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
  • THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
  • COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
  • FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
  • RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
  • Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
  • Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
  • The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.
Check Stock