Top Aaac Wire Supplied To

Prg-108 GQ-4X V4 (GQ-4X4) Programmer + ADP-019 PSOP44 Adapter V2

  • The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.
  • The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
  • STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software..
  • STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments..
Check Stock

LC to LC Fiber Patch Cable Multimode Duplex - 3m (9.84ft) - 50/125um OM3 10G - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality laser-optimized 50/125 Multimode LC to LC OM3 Fiber Patch Cable is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • OM3 Fiber Patch Cable LOMMF connects to 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10Gb networks..
  • This OM3 Multimode Fiber Patch Cable conforms to ITU-T G.651.1, TIA/EIA 492AAAC and IEC60793-2-10 A1a.2a standards and complies with all RoHS environmental specifications..
  • This LC to LC OM3 fiber patch cable has an aqua color jacket with a 3 mm diameter. OM3 cables have a 1500 MHz-km bandwidth and a 2.3dB/km maximum attenuation at 850 nm light sources. They also have a 500 MHz-km bandwidth and a 0.6dB/km maximum attenuation at a 1300 nm wavelength..
  • OM3 fiber patch cords operate at -20°C to +70°C and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm – LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Facon 7 1/4"x25" Water Holding Tank Heater Pad for RV Motorhome Camper Trailer Boat with Automatic Thermostat Control 12V DC(Pack of 2)

  • Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter..
  • Reticular carbon fiber design provide heated evenly & efficiently..
  • Built in thermostat is set to turn itself on at 45°F( + – 5 degrees) / 5? and turn itself off at 68°F( + – 5 degrees) / 20?. As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing..
  • Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required..
  • 2-Wires Design without Plug- Convenience for fixed place installation. Includes Lead Wire for Power(Red wire) and Ground Wire(White wire). The Model works efficiently up to 50 gallon holding tanks.
Check Stock

IWISS SN-PM Wire Crimping Tool & Wire Stripper Set 8 Pieces Quick Changing Die Sets for Heat Shrink Terminals Open Barrel Terminals MC4 terminals Insulated & Non-insulated Connectors

  • Purpose: SN-PM is an all-in-one wire terminal crimping tool set which includes an SN series compact crimper, 5 quick changing die sets, one wire....
  • 5 Pieces Die Sets: SN-PM wire crimper tool kit includes 5 quick changing die sets work with heat shrink, insulated nylon/vinyl terminals, open....
  • Wire Stripper: Ideal for copper and aluminum cables from 10-22 AWG. Multifunctional stripper & cutter. Built in shear cutter cuts solid or stranded....
  • Applications: Wire crimping tool set(8 pieces) ideal for electrical wiring projects in DIY, electronics, RV refit, RC race car, automotive audio,....
  • Compact Storage: Crimping tools are steel construction with comfortable cushioned grip handles. Supplied in a durable, plastic molded storage case..
Check Stock

Premium High-Efficiency Diffuser For outdoor Pond & Lake Aeration MADE IN USA by US Solar Mounts

  • Clear Bulb Recommended: Clear Bulbs Are Recommended For The Outdoor Wall Lantern As They Offer An Even Light Spread.
  • Ul Listed For Wet Locations: With A Heavy-Duty Weatherproof Case, These Outdoor Wall Mount Lantern Lights Are Well Equipped To Withstand The Elements, Dust And Dirt.
  • SUPPLIED WITH 6.5" OF WIRE: it’s easy to install the outdoor wall lantern lights upon receiving them as they come with 6.5” of wire.
Check Stock

NikoMaku Mirror Dash Cam Front and Rear Backup Camera GPS Full Touch Screen Rear View Mirror Camera Full HD 1080P 170° Wide Angle Dual Lenses Waterproof AS-2 Plus

  • [Driving with Your Fully Updated Rear-view Mirror] Along with the supplied bracket, the Dash Cam can replace your existing rear-mirror completely. It can also keep the dash cam away from vibrations or jolts effectively while driving, which could offer a stabler image than the rubber band method. The bracket can be compatible with most car models on the market. If the supplied dash cam mount is not compatible, you can also use the supplied rubber band to attach it to the existing rear-view mirror.
  • [High-Quality Video Recording] The AS-2 Plus Dash Cam is capable of full-HD Video at 25 fps instead of 20fps performed by other dash cams. The videos can be clearer, smoother, more fluent. The file size can be much smaller thanks to the updated chips, which makes the SD card store more files. The WDR technology can offer higher contrast at night and ensure clear recordings in bright and dark night..
  • [GPS Logger] GPS co-ordinates and speed can be recorded and shown on the recorded files thanks to the supplied GPS sensor. The whole route can also be displayed in the google map through the specialized software. The time and date are set automatically based on the GPS position. (The software only supports Windows system.).
  • [Parking Assist Function] When puttin....
Check Stock

Dr.Acces Golf Cart Rear View Mirror with LED Turn Signal | Golf Cart Side Mirror with LED trun Signal Fits EZ-GO Club Car Yamaha etc Most Golf Cart

  • Universal Side Mirror with LED Turn Signal including Installation instructions, 180° extra Adjustable wide panoramic.
  • Installation Step 1:Find desired mounting location and mark with a marker. Drill 2 small 1/8” holes in strut for mounting hardware. Drill 1/4” hole for wire. Or run your wires down strut, secure wires using mounting ties..
  • Installation Step 2:Using a wire snake feed wires in through strut and out the bottom..
  • Installation Step 3: Loosen hardware to mount LED mirror Bracket using supplied hardware. Reattach mirror to bracket using hardware from and tighten at desired mirror location..
  • Installation Step 4: a.Up-plug head-light. Use a multi meter to find power and ground for the blinker. This will supply power to the LED mirror. To do this engage blinker on turn signal, the pin that shows 12V flashing is your blinker 12V(+). b.Attach Red wire to the wire found on the harness that showed 12V(+) flashing in step 3 using a Splice Wire Connector and secure.Re-attach harness to Headlight and repeat steps 1-7 on opposite side..
Check Stock

Humminbird PC-11 Power Cable for Side-Imaging Units , Black

  • Soldered Bare wire leads on one end for extending reach.
  • Connect power to fuse panel or in-line fuse holder(not supplied).
Check Stock

Muzerdo Automatic Motorized Electric Wire stripper Machine (1.5mm-3.8mm) Scrap Cable Stripper for Scrap Copper Recycling

  • ...e best wire stripping machine for heavy-duty industrial grade use will find this unit to be the perfect fit.
  • Power supply: 110V, 50-60Hz, 370w, 23x11x14.5inch, 85Lbs, 2 control model, Easly control the machine wit the ON/OFF button, or manually control the machine with the supplied handwheel.
  • If you face any problems, please feel free to contact us, we promise that we will make you satisfied 100%.
Check Stock

Qty 2 6\ Mid Turn Signal Amber Marker Light Rubber Mount 12 LED w/Reflex Lens Universal Waterproof 6 Inch Oval Led Mid-Ship Marker and Turn Signal Semi Truck Trailer Peterbilt Kenworth Light

  • 3 wire pigtails for Ground, Marker and Turn Signal Function.
  • LED Quantity: High power 12 LED, White Wire is the Ground.
  • These Lights are impact resistant and less susceptible to shock damage. Each Light is water-tight sealed. These bulb's draw less current, generate less heat and are brighter and light faster than an incandescent bulb..
  • Flush Mount,Unit is supplied with rubber grommets,with reflector.
  • Meets DOT FMVSS 108/SAE and ECE requirements (E-Mark certified). Fit for all kinds of trucks,trailers,offroad vehicle, atvs, semi-trailers,bus,tractors, semi-trailer, Dump Truck, special vehicle,etc..
Check Stock

Cablematic C.A.T.-AS Coaxial 59/6 and 7/11 Connector Compression Tool for Professional Technicians, Easily Portable Connector Tool, 1.1 Pounds

  • ...t of connectors from most connector manufacturers. Plus, it has 2 jaw sets for added versatility..
  • DURABLE CABLE CONNECTOR TOOL: This sturdy wire connector tool features a strong black-coated, cast-aluminum body for added longevity. It offers simple tool calibration with a supplied gauge block and is compatible with 59/6 and 7/11 connectors..
  • SAFE TOOL FOR TECHNICIANS: Safety is our top priority when it comes to tools. Our C.A.T. Connector Compression Tool is made from reliable materials and offers clear visibility of the connector compression operation..
  • PORTABLE TRAVEL TOOLS: We understand that technicians are moving from job site to job site, so we design tools that technicians can easily transport. The small, compact design of our connector compression tool is ideal to store and carry in toolboxes..
  • OUR STORY: We are a premier manufacturing company dedicated to providing high-quality wire and cable tools. We offer professionals access to safe and reliable devices across a variety of markets. Our goal is to be the leader in innovative wire tools..
Check Stock

Sea Gull Lighting 4123-15 Stepped Glass Wall/Bath Sconce Vanity Style Fixture One - Light White

  • Easily Converts To Led With Optional Replacement Lamps.
Check Stock