Top Abs Filament

SainSmart Filament Dryer 3D Printer Filament Storage Dry Box Filament Dehydrator Container, with Upgraded Silent Fan, Advanced Heating Mechanism, Up to 24hrs Timer, and Adjustable Temperature

  • [Fast & Even Heating]: SainSmart Filament Dryer Box is equipped with an enhanced heating mechanism. The Polyimide heater inside the box allows for rapid heat up, the curved metal plate enables effective heat transfer and the air circulation fan at the bottom delivers evenly heated filaments..
  • [Reduced Noise Level]: The upgraded SainSmart 3D Printer Filament Dryer equips with an upgraded centrifugal fan that is 20% quieter than its predecessor, providing you a better experience..
  • [Up to 24 Hours Timer]:The maximum drying time of this filament dryer is 24 hours, constantly drying your filament for the best printing results..
  • [Straightforward Temperature Setting]: There are 3 default temperature settings for different filament types. I: 40 °C, for PLA and PLA+ Filament.
  • II: 50°C, for ABS, ABS+ and PETG Filament.
  • III: 55°C, for TPU, PVA, PC and Nylon Filament..
  • [Wide Filament Compatibility]: With a maximum filament capacity measuring ⌀200mm × 73mm(H), the SainSmart Filament Dryer is compatible with filaments with different spool weights and sizes. 500g, 1KG.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

Monoprice ABS Plus+ Premium 3D Filament - Black - 1kg, 1.75mm Thick | 40% Stronger Than Ordinary ABS | For All ABS Compatible Printers (115848)

  • ABS Plus+ is an upgrade of ordinary ABS filament, which is one of the most commonly used filament types in 3D printing..
  • It is 40% stronger than ordinary ABS filament and has good overall toughness..
  • This 0.5kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm..
  • It has a nominal processing temperature of 210 ~ 240°C (410 ~ 464°F)..
  • Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament..
Check Stock

SUNLU ABS Filament 1.75mm, Super Neat Filament Spool, Strong Durable 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs), 395 Meters, Black ABS

  • ① 【ABS Strong 3D Filament】SUNLU ABS 3D filament is a type of strong and durable filament, ideal for printing durable items or functional parts that require higher heat resistance..
  • ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ③【Filament Spool Diameter】Spool Diameter: 8.00.
Check Stock

SUNLU PETG-G Filament 1.75, Neat Filament Spool, Stronger PETG-G 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool(2.2LB), 320 Meters, Black

  • ①【PETG Filament Advantages】PETG filament combines the advantages of both PLA and ABS 3D printer filament, PETG filament is easy to use like PLA, durable strength like ABS..
  • ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ③【SUNLU Neat Spool Diameter】Spool Diameter: 8.00.
Check Stock

SUNLU 2KG PETG 3D Printer Filament Bundle, Super Neat Filament Spool, Strong PETG Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool(2.2LB), Pack of 2, Red+Orange

  • ①【PETG Filament Advantages】PETG filament combines the advantages of both PLA and ABS 3D printer filament, PETG filament is easy to use like PLA, durable strength like ABS..
  • ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ③【SUNLU Spool Diameter】Spool Diameter: 8.00.
Check Stock

10 Pack 3D Printing Filament ABS 3D Printer Filament 1.75 mm 0.2 kg Each Spool 10 Colors Filament Pack with Nozzle and Cleaning Needle Compatible with FDM 3D Printers, Solid and Translucent

  • Quantity and Color: the 3D printer filament pack includes 10 pieces of ABS 3D printing filaments, 1 piece of nozzle and 5 pieces of cleaning needles (packed in a tube).
  • 10 Colors which include solid and translucent, 5 pieces for each.
  • Plenty of colors and quantities allow you to make works that look nice.
  • Reliable Material: our printer filaments are made of quality ABS which are smooth surface, colorful no clog or bubble.
  • Printing is smoother, and it helps you get better quality prints.
  • Dimensional Precision: stable quality of our 3D printing filament set.
  • The wire diameter is stable, and each product is tested by an infrared caliper.
  • You can create trusted, quality prints that professionals and creators love.
  • Anti Humidity: our 10 colors ABS filament 1.75 mm comes in a vacuum sealed, reusable bag and keeps dry.
  • Fully sealed packaging protects the product from humidity during shipping.
  • Making sure the printing performance of your filament.
  • Wide Compatibility: ABS 3D printing filament has manufacturing accuracy standards and a small diameter tolerance of +/- 0.02 mm, most use 1.75 mm 3D printers can work perfectly and coordinate with them perfectly.
Check Stock

Gizmo Dorks ABS Filament for 3D Printers 1.75mm 200g 4 Color Pack - Blue Green Orange Red

  • ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant.
  • Extrusion nozzle temperature: 225 - 250 C.
  • Recommended to use a heated build platform.
  • Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
  • ABS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
  • Color pack contains 4 spools, each spool contains 200g of filament. Colors: Blue, Green, Orange, Red.
Check Stock

HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Transparent Orange

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210°C - 240°C (410°F - 464°F).
  • TOUGH & DURABLE FILAMENT: Hatchbox ABS filament, or Acrylonitrile Butadiene Styrene, is known for its durability, versatility and smooth finish. One of the most commonly used filaments, ABS is strong, impact resistant, and ideal for fully functional prototypes and other end-use applications..
  • BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
  • STRONG & IMPACT RESISTANT: ABS 3d printer filament is more impact resistant than PLA and also suitable for use at higher temperatures, enabling a broader range of applications. Each spool is vacuum-sealed with moisture-absorbing desiccant to ensure clog, bubble, and tangle-free printing..
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price. From....
Check Stock

ABS 3D Printer Filament - 2.20 lb (1KG) The Diameter of 3.00 mm, Dimensional Accuracy ABS Multiple Color (Gray)

  • 2.20 lbs ( 1.00 kg) Spool / 3.00 mm Dimensional Accuracy +/- 0.05mm Filament Diameter about 440 ft (135 m) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temperature: 446°F - 518°F (230°C - 270°C), use with heated build platform is recommended..
  • ABS Filament Features: Tough and Durable/ stand higher temperatures/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with ABS. Dimensions: 6.1 x 6.1 x 3.34 inch ( 155 x 155 x 85mm )..
  • Premium Quality: Inland ABS 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock