Top Ac Vibration Isolator

4 Pack of Anti Vibration Pads 4\ x 4\ x 3/8\ All Rubber Vibration isolation pads

  • Rubber Mounts Dimensions - Thread size M6*18mm / 0.24" x 0.71".
  • Application - As a damping element for welding machine and other equipment for vibration, shock and noise control.
  • Compact & Stable - Made of Natural rubber and steel.
  • Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
  • Damping Element - Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious.
  • In the radio equipment, instruments, protect machine vibration interference, having a good buffer.
  • Suitable For - This rubber isolator mounts mainly used for air compressors, diesel engines, gasoline engines, water pumps, office facilities, aviation, construction, automobile, etc.
Check Stock

Isolate IT Lavalier Microphone Isolation Shield System for Sanken COS-11 (Black)

  • FOR LAVALIER MICROPHONES: This lightweight mic isolator is designed to fit Sanken COS-11 lavalier microphones. To install, insert the lavalier wire while flexing the isolator open and then slide the microphone down into the cavity..
  • COMPACT ISOLATION: This isolation device is made with a Sorbothane lining that can absorb up to 94.7% of vibration noise and energy while in use. This mic isolator can also reduce noise from mic hits, rustling clothes, and other unwanted sounds..
  • SAFE TO USE: These heavy-duty isolators are safe to use on all materials and can be attached directly to the skin. To fix onto fabric, skin, or other materials, attach the isolator to an adhesive, like a sticky piece of tape, to ensure a sturdy hold..
  • OPTIMAL SOUND QUALITY: Thanks to its slim, contoured design, this miniature mic isolation adapter can provide crisp, quality audio when attached to all types of garments and between layers of clothing..
  • PROFESSIONAL AUDIO RECORDING: This portable lav filter can be used to provide high-quality sound for an interviewer, reporter, broadcaster, presenter, podcaster, and anyone else in a field that requires up-close, quality sound..
Check Stock

Floor Mount Vibration Isolator, 100% Neoprene, Capacity Range: 15 to 45 lb.

  • 0.20" to 0.40" deflection, Oil-resistant.
  • Cap screw Dia. and length M10 x 30mm, Includes top bolts and washers.
  • Neoprene floor-mount vibration isolator provides more deflection than isolation pads.
  • This thicker, taller isolator with neoprene bottom helps eliminate the need to bot to the floor.
Check Stock

DNA Motoring LEPOW-010 Aluminum Battery Box Relocation Kit 13.5\W x 9.5\D x 10\H

  • 【Easy installation and waterproof】 No need for alternator or ignition connection. After installation, it can still be used normally even if it is affected by vibration, various bad weather and other factors. At the same time, the isolator supports waterproof function, and the waterproof grade is IP67. (Only suitable for lead-acid battery to lead-acid battery or lithium battery to lithium battery).
  • 【Manual Modes】 Press and hold the "Power" button for 3 seconds, the upper blue (LED) indicator light is on, and the manual mode is turned on. In this mode, click the "Power" button to turn on/off the isolator. Click the "power" button, the lower red (LED) indicator light is on, and the isolator is turned on.
  • click the "power" button again, the lower red (LED) indicator light is off, and the isolator closure..
  • 【Automatic Mode】Long press the "Power" button for 3 seconds, the upper blue (LED) indicator light goes out, and the automatic mode is turned on. In automatic mode, the voltage-sensitive relay (VSR) cuts in at 13.3 volts, and the lower red (LED) indicator lights up. The voltage-sensitive relay (VSR) is cut off at 12.8 volts, and the lower red (LED) indicator light turns off.
  • 【LED SCREEN REAL-TIME VOLTAGE DISPLAY】 The surface of the isolator....
Check Stock

LANIAKEA 8 Pack Anti-Vibration Air Conditioner Mounting Bracket Shock-Proof Pads Supports Up to 1000 lbs/4 PCS, Heavy Duty Shock-Proof Pads Mounts

  • Package Include: 8 pack Rubber Vibration Isolator Mounting Bracket with stud and galvanized nut..
  • Size: Base: 4.3’’x1.9’’/11x5cm, Height: 2.4’’/ 6cm. Anti-slip bottom rubbers pads. It supports up to 1000 pounds for all 4 pcs..
  • Easy to Install: Just put the screws through AC units legs holes and then fasten the nuts..
  • Heavy Duty: Made of Hard TPU rubber, durable and strong, provides sturdy support for air conditioner..
  • Fit most of Mini Split Air Conditioner Condenser. It’s designed for heavy duty indoor or outdoor use..
Check Stock

Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10

  • 【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
  • 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
  • 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
  • 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
  • 【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).
Check Stock

Anti Vibration Isolation Pads 2\ X 2\ X 7/8\ Ribbed Rubber with Cork Center Vibration DAMPENING, Quantity 4

  • 【New Product Upgrade And Heightening】This Air Conditioning Shock Pad is an upgraded model, using diameter 0.39 inches screws and 1.2 inches enlarged washers, the height is upgraded to 3.2 inches, and the bottom is widened to 2.9 inches x 4.33 inches..
  • 【Elastic Rubber】Rubber isolator use high-quality rubber materials and add antioxidants to extend the service life..
  • 【Vibration And Noise Control】Rubber vibration isolators anti-skid strips are designed on the bottom to effectively prevent the outside machine from moving and sliding..
  • 【Easy To Install】All you have to do is to put the anti vibration rubber mounts hole ​in the screw and tighten the nut of the anti-vibration bracket. The set includes all anchoring accessories..
  • 【Wide Application】 You can use the anti vibration rubber pads ​on the balcony or roof or even the sidewalk, and it does not look bulk..
Check Stock

Ground Loop Isolator - Cable TV Audio Isolation Transformer,Hum Buzz TV/Noise Eliminator

  • No more Hum/Buzz/Noise, No More Rolling Line.With this unit,you can eliminate audio hum/buzz/noise and horizontal scrolling bars caused by ground loops..
  • Product shows superior RF performance operating at a frequency range of 5 - 1,000 MHz. Maximum insertion loss is 1.5 dB. at 1 GHz..
  • Perfect design with a metallic housing that provides excellent RFI shielding of 003e 85 dB. The Housing is environmentally sealed against moisture and humidity..
  • Each end of the isolator is a nickle-plated 75 OHM machined female F connector.
  • Note: If your cable by pass the DC current, it will not work. Normally the signal from the antenna or coax cable belongs to low voltage AC current and our Isolator will work with it..
Check Stock

NATGAI 4Pack Rubber Vibration Isolator Mounting Bracket/Air Conditioner Mounting Bracket for Outdoor Mini Split Air Conditioner Condenser

  • 【Material】: PC material and the anti vibration rubbers gives the best solution for your outdoor and indoor units.
  • 【Dimensions】: - 4 3/8"x 2" Base, 3 1/8" Tall.
  • 【Heavy Duty】: Natural rubber with galvanized stud and nut. No Plastic. Set of 4 pieces.
  • 【Suitable for】: Mini Split Air Conditioner outdoor units, Designed for heavy duty indoor or outdoor use, support up to 800 lbs for all 4 pcs.
  • 【Package Included】: 4 pack Rubber Vibration Isolator Mounting Bracket( screws are not included).
Check Stock

8 Rubber Vibration Isolator Mounts (Rubber 3/4\ H x 1\ D) Studs: 1/4-20 x 1/2\ Length

  • Package Includes 8 Rubber Vibration Isolator Mounts.
Check Stock

LiftMaster - Garage Door Opener Vibration Isolator Kit 89LM

  • LiftMaster 89LM Vibration Isolator Garage Door Overheard Motor Auth Parts Repair.
Check Stock

VIAIR 48043 Chrome 200 PSI 480C Air Compressor

  • 12 VOLT - 200PSI Max Working Pressure, engine must be running during use..
  • Harmount unit with heavy duty wire for permanent installation..
  • Includes: Stainless steel braided hose, Inline check valve to eliminate high amperage restarts, vibration isolator, and remote air filter option..
Check Stock