Top Ac dc Motor

Engel 84 qt Portable Top-Opening AC/DC Fridge/Freezer

• Automatic Voltage Selection between AC and DC power.
• Highly Efficient Swing Motor Compressor - Low Amp Draws (even at start-up).

UEi DL599 - Wireless TRMS Clamp Meter with Motor Testing (600 A AC/DC)

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch (DWE4120)

• 9 amp AC/DC and 12,000 RPM motor of the angle grinder is designed for faster material removal and higher overload protection.
• High-efficiency motor of the metal grinder provides low operating temps.
• DEWALT angle grinder comes with One-Touch guard allowing for 360-degree rotation of the guard with a single action.
• Slim ergonomic body design provides increased comfort in extended use applications.
• Low-profile, jam-pot gear case increases durability and allows tool to fit into tight spaces.
• Quick-Change wheel release allows tool-free wheel removal without need for a wrench.
• 2-position, removable side handle provides increased comfort and control.
• 5/8-inch 11 spindle thread accepts a wide range of 4-1/2-inch accessories.

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

• ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
• ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
• ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
• ⚡【Application】1.Power circuit measurement and malfunction analysis.
• 2.Motor drive of frequency converter (or other electronics) measurement.
• 3.Power electronics equipments measurement..
• ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

• This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
• 【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
• 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
• 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
• 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.

Hantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio

• ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
• ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
• ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
• ⚡【Application】1.Power circuit measurement and malfunction analysis.
• 2.Motor drive of frequency converter (or other electronics) measurement.
• 3.Power electronics equipments measurement..
• ⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..

SIEMENS 6ES7 214-1AG40-0xB0 SIMATIC S7-1200 CPU 1214C, Compact CPU

• ...thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
• Programmable Control -- This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run Input high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc..
• Built-in Analog Input and Output -- Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030) Built-in Analog output DA, corresponding to internal data register D5101..
• The PLC with Two Programming Port -- The TTL interface and the 232 interface. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port..
• Buy it Confidence: Let you feel safe using, so y....

New Genuine PS for HP Z420 Workstation 600W Power Supply 632911-001 623193-001

• 24V Power Supply: Input AC 110V/220V, Output 24V, Rated power 24A 600W, PSU(SMPS) AC to DC convert , output current depends on the requirements of the power consuming equipment, Power multiple devices with different Currents/ Watts.
• Intelligent Cooling: 24V 600W Power Supply converter with aluminum alloy shell, built-in cooling fan, metal shell with multiple holes for more efficient cooling, more stable work, high efficiency.
• USED WIDELY：DC 24V Power converter Used for Brushless type motor drive, Amplifier,Radios,LED drive, CCTV Camera System, Car Stereos, water Pump and more 24V Device. NOTE:Not suitable for charging Battery,Speed Control Motors..
• Safe stable: long service life, power supply with over/under voltage, overheating protection,Compact:21.5×11.5×5cm/8.5×4.5×2 inch, weight 0.75 kg，SAFETY: Use must derating: max load cannot exceed 80%.
• Note: SMPS peak power is 25A 600W, avoid overload, For resistive equipment, Recommended for equipment under 20A 480W. For motor equipment, the starting current will be much higher than the rated power and the peak power of the SMPS needs to exceed 2 times the motor power..

CHANCS TYZ42 Synchronous Motor TYC-40 AC 12V 5RPM Shaft Length 46MM for Fiber Optic Christmas Ornament …

• This is a TYC-40 AC 12V 5RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
• 【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Speed: 5RPM； Shaft Diameter: 4.5mm ； Shaft Length: 46mm； Shaft Screw....
• 【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
• 【Attention:】 The applicable voltage of this motor is AC 12V, USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
• 【Package Content:】1PC x Synchronous Motor.

ECO LLC Linear Actuator Controller for Linear Motion Actuators DC Motor 12V Wireless Remote Motor Control Switch Kit 5A with 12V ACDC Adapter Power Supply,5A Black+Adapter

• 【2 Optional Power Mode】Design for 12V DC motor,directly connect to AC Power or work with battery to drive linear actuator,suitable for most installation environments..
• 【Easy to Install】Equipped with direct insertion cable for easy connection,the easiest installation and quick response.Input Voltage 100-240VAC 50/60Hz.
• 【Use Safely】Over-voltage protection, over-current protection, short circuit protection,protect your linear actuator from destruction,12 MONTHS WARRANTY!.
• 【Remote Controller】Remote switch has small volume, stable and reliable performance and high receive sensitivity. Enables the motor moving forward --stop-- backward，clockwise--stop--counterclockwise..
• 【Package Included】1 Remote Controller + 1 Receiver + 1 AC/DC Adapter (with US Plug) +2 Battery Connection Cable (LINEAR ACTUATOR NOT INCLUDED).

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch with No-Lock On (DWE4120N)

• 9 amp AC/DC, 12,000 rpm motor of the angle grinder is designed for faster material removal and higher overload protection.
• High-efficiency motor of this metal grinder provides low operating temps.
• DEWALT angle grinder comes with One-Touch guard allowing for 360 degree rotation of the guard with a single action.
• Slim, ergonomic body design provides increased comfort in extended use applications.
• Low-profile, jam-pot gear case increases durability and allows tool to fit into tight spaces.
• Quick-Change wheel release allows tool free wheel removal without need for a wrench.
• 2-position, removable side handle provides increased comfort and control.
• 5/8-inch 11 spindle thread accepts a wide range of 4-1/2-inch accessories.

Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-20Amp)

• The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection..
• Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor..