Top Accessories Tap Wrenches Tools

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it..
  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it..
  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of cour....
Check Stock

ORION MOTOR TECH 86pc Tap and Hex Die Set in SAE and Metric | Titanium Coated Steel Tap Set and Die Tool Set for Homeowners Mechanics Metric Standard Internal External Threading(Iron Case)

  • ALL-IN-ONE TAP & DIE SET: This 86-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the most needed standard and metric sizes, from #4 (14/125") to 5/8 inch and from M3 to M16.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • PREMIUM DURABILITY: This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel.
  • titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence.
  • ADDITIONAL TOOLS: In addition to the 78 taps and dies, this tool set includes both adjustable and T-handle wrenches, a 1/8" flathead screwdriver, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASE: The metal storage case stores and organizes the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

Keenso 4 x Stem Screws, Titanium Alloy M5*18 Stem Screws Set for Mountain Bike Road Bicycles Bolts Replacement Accessories(Colorful)

  • Carbon steel pipe taps are used to clean and re-thread damaged threads.
  • tough and durable bearing steel,quick-disconnect bolts.
  • Convenient to hold,for tightening ratchet wrenches,multi-function wrenches,convenient force.It is also suitable for ordinary screw removal.
  • Removal of damaged,rusted or peeled screws and fasteners can be used to remove and clean damaged water pipelines during water pipe maintenance.
  • Only for wire screw puller tap components,excluding other demo accessories in the picture.
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • ...lows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
  • T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools..
  • Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much more robust and used for a broader range of material. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
Check Stock

Real Avid Pistol Tool for Gunsmithing, Multitool & Handgun Utility Tool for Striker Fired & 1911 Platforms, Includes 1911 Bushing Wrench, Tanto Knife & Laser Sights Adjusters, OD green, 19 in 1 Set

  • BE PREPARED FOR ANY TASK AT THE RANGE OR IN THE FIELD: with the 19-in-1 Pistol Tool you can breakdown, tweak, accessorize and adjust your favorite handgun whenever, wherever.
  • ALLEN WRENCHES FOR ADJUSTING LASER SIGHTS ARE STORED ON THE TOOL: the 1/16”, .05”, .035”, .028” Allen wrenches are stored on the tool so you always know where they are.
  • QUALITY GUNSMITHING BITS LOCK INTO THE TOOL: the 3/16” Flat, 1/8” Flat, #2 Phillips, #1 Phillips, 3/32” Hex, T15 Torx have ball detents are square cut hollow ground to prevent stripping.
  • BREAKDOWN AND CLEAN YOUR PISTOLS: 1911 government and officer bushing wrench.
  • 3/32" pin punch interchangeable with 8-32 threaded cleaning tools.
  • non-hardened stainless steel pick/scraper.
  • EVEN MORE TOOLS: 3" tanto knife, 2.5" long bit driver, fine tooth metal file, and tap hammer surface.
Check Stock

uxcell Adjustable Ratchet Tap Wrench T-Handle, for Metric M5-M12 Taps, Tap Reamer Tapping Ratcheting Wrench Hand Tool, 295mm (11.61-inch Approx.) Body

  • Tap Wrench: Fit tap size: M5-M12 (Mertic)/ 3.5mm-12mm, 295mm (11.61-inch) body length. Steel jaws and knurled chuck provide secure and firm grips on hex or square drives.
  • Applications: It is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Easy To Use: The ratchet tap wrench can be operated with one hand, and easily switched from right-handed tapping to left-handed tapping, or locked for non-ratcheting use. Easy to use even in narrow space..
  • Features: T-handle ratcheting tap wrenches provide quick and efficient ratcheting action. The diamond-shaped head has a beautiful and practical anti-skid design.
  • Tips: The T-handle can be detached. It also can be slipped from side to side for positioning convenience, and added leverage in tight places..
Check Stock

uxcell Adjustable Ratchet Tap Wrench T-Handle, for Metric M5-M12 Taps, Tap Reamer Tapping Ratcheting Wrench Hand Tool, 111mm (4.37-inch Approx.) Body

  • Tap Wrench: Fit tap size: M5-M12 (Mertic)/ 3.5mm-13mm, 111mm (4.37-inch) body length. Steel jaws and knurled chuck provide secure and firm grips on hex or square drives.
  • Applications: It is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually..
  • Easy To Use: The ratchet tap wrench can be operated with one hand, and easily switched from right-handed tapping to left-handed tapping, or locked for non-ratcheting use. Easy to use even in narrow space..
  • Features: T-handle ratcheting tap wrenches provide quick and efficient ratcheting action. The diamond-shaped head has a beautiful and practical anti-skid design.
  • Tips: The T-handle can be detached. It also can be slipped from side to side for positioning convenience, and added leverage in tight places..
Check Stock

ASZLBYM 5/8\ 36PCS Indexable Carbide Lathe Turning Tool Insert Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with CNMG 431 + WNMG 431 + TNMG 331 Indexable Carbide Turning Insert Blades

  • 【High Precision】- These carbide lathe tools with different angles can cut out any model you want with high precision. Practical lathe tools set can meet any of your cutting needs..
  • 【Free Accessories】- The metal lathe tool comes with some installation accessories: 2 wrenches, 2 socket wrenches, 7 screws and a precision blade. It is very convenient to provide you with assembly and disassembly services..
  • 【40CR Material】-These cutting tools for milling machines are made of hard 40CR material. No need to worry about it breaking or deforming during use..
  • 【Portable Storage Box】- The size of this storage box is 2.7’’*0.39’’*0.39’’ and the weight is 1.4LB. You can store them in this box in an orderly manner when you do not need to use these tools. So your Workbench will become clean and tidy..
  • 【Widely Used】- These Indexable Carbide Tools is widely used in various product processing.heavy rough cutting and other fields of processing..
Check Stock

QISF Adjustable Silver T-Handle Ratchet Tap Holder Wrench with 5pcs M3-M8 3mm-8mm Machine Screw Thread Metric Plug T-shaped Tap

  • Chromium-plated finish for the highest durability.
  • Size of screw thread taps : M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25.
  • Easily switched from left to right handed operation, or locked for non-ratcheting use.
  • T-Handle Ratcheting Tap Wrenches Three position gear box for quick, efficient ratcheting action Designed for use with taps and can also use on the left hand tap , reamers, screw extractors and other tools with a square shank.
  • Package included: 1-Piece Adjustable T-Handle Ratchet Tap Holder Wrench + 5Pcs Taps(1Pcs M3.
Check Stock

RC Drone Gimbal Yaw + Roll Arm Repair Kit Part Screws Compatible with DJI Phantom 3 Standard Deformation Model

  • 【Packing list】: including 1 yaw arm, 1 roll arm, 1 universal joint cable, 3 hex wrenches, 1 set of screws and 1 set of 2 universal joint protection tools..
  • 【Easy to install】: This set of gimbal is simple to install, without complicated installation steps, once installed, it is not easy to fall off..
  • 【High quality】: This gimbal set is made of high-quality aluminum alloy material, which is anti-rust, durable, environmentally friendly, not easy to deform, and extends the service life of the product..
  • 【Applicable to】: This set of gimbal is specially designed for DJI Phantom 3 STANDARD remote control drone, perfectly compatible..
  • 【Replacement parts】: perfect accessories to match original parts, can be used to replace old or damaged gimbal accessories..
Check Stock

GEARWRENCH 613 Pc. Master Mechanics Hand Tool Set - 89060, Multi, One Size

  • INCLUDES: Comprehensive 613 piece set mix of mechanics hand tools including drive tools, sockets, bit sockets, wrenches, ratcheting wrenches, pliers and screwdrivers.
  • 90T GEAR: 90-tooth gear delivers a 4° swing arc to turn a fastener in tight confines.
  • 72T WRENCHES: 72 tooth ratcheting wrenches with a 5° swing arc with off-corner loading design on box end provides better grip and reduces fastener rounding.
  • FLEX HEAD WRENCHES: Flex head ratcheting wrenches with flex head that tilts up to 180 degrees at any interval.
  • REVERSIBLE WRENCHES: Reversible ratcheting wrenches with compact reversing lever allows for quick changes without removing ratcheting box end from fastener.
Check Stock