Top Accu Gage 2

General Tools 444 Depth/Angle Gage

  • This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface.
  • The hardened steel base is grooved on both sides to deliver accurate angles.
  • Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides.
  • The rule can also be used as a depth gage for measuring small holes and slots.
  • Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base.
  • This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base.
Check Stock

HFS (R) 36 PCS Grade B GAGE Gauge Block Set

  • [Accuracy]: AS-2 003e Grade B : +/- 0.000050". Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C).
  • [Material]: Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
  • [Application]: Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade AS-2 gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters..
Check Stock

Fowler 52-646-300-0 Cylinder Dial Bore Gage with 6 Measuring Range

  • ACCURATE MEASUREMENTS: This Bore Gage Features A Dial Indicator With A Graduations Of 0.0005" And A Measuring Depth Of 9.5".
  • EXTENDED RANGE: This 2-6" Bore Gage, With A Two-Point Contact System, Is Used For Measuring Hole Diameters And To Detect Geometry Abnormalities. The Carbide-Tipped Anvil Contact Points Provide Extended Wear & Improved Abrasion Resistance.
  • SELF-CENTERING: The Easily Adjustable Bore Gage Is Self-Centering For Fast And Accurate Measurements.
  • USER-FRIENDLY: The Insulated Grip Allows For easier measuring and is easily adjustable.
  • SET INCLUDES: This bore gages comes with a protective fitted case and 2 Inch extension.
Check Stock

ACCU-CHEK Performa 50 Test Strips, 2 Packs 50 Strips Each

  • 100 Test Strips (2 Packs 50 Strips Each).
  • Only 0.6µL blood sample requirement (2-4 times less blood sample requirement than Accu-Chek Active test strips).
  • Measure with capillary, venous, arterial, neonatal blood samples.
  • Compatable with only Accu-Chek Performa Nano blood glucose meters.
Check Stock

COLIBROX 32 PC 17/64-1/2'' Radius Gage Set Steel Precision Gauge Set Machinist Tool

  • Made from the finest quality steel available.
  • Each gage has leaves for measuring surfaces for convex and covace radii.
  • Useful for tool and die makers, machinists, screw machine operators and other mechanics to layout and check radii of tools, dies, etc..
Check Stock

30 PC 1/32 - 1/4'' Radius Gage Set Steel Precision Gauge Set Machinist Tool

  • Made from the finest quality steel available.
  • Each gage has leaves for measuring surfaces for convex and covace radii.
  • Useful for tool and die makers, machinists, screw machine operators and other mechanics to layout and check radii of tools, dies, etc..
  • Overall length (when closed): 2-3/4'' long.
Check Stock

Urban Worm Soil Thermometer - Keep Microbes and Worms Happy for Gardening and Worm Composting

  • Bigger and Bolder - Zip-o-gage 2 is 30% larger than the original! The 2" thermometer makes it easier than ever to get a quick reading of the surrounding temperature. A great addition to your key chain and can also serve as an awesome gift!.
  • Cushion-Mounted Thermometer - Our accurate thermometer reads down to a chilly -20° Fahrenheit or -30° Celsius. It's lightweight and small enough to take anywhere!.
  • Wind Chill Chart - Included on the back is a small wind chill chart that let's you calculate the "feels like" temperature. One of the essential tools for cold weather environments..
  • Handy Keyring- Attach to your coat, pack, zipper, or anything else you can think of. The Zip-o-gage 2 is the perfect addition to your camping, hiking, survival, and travel gear..
  • An Outdoor Essential - Zip-o-gage 2 is a must-have accessory for camping, hiking, backpacking, skiing, or travel. Great for an emergency, or just for every day carry (EDC)..
Check Stock

Forster Products 5.56 NATO MIN and MAX Headspace Gage Set

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

Accu-Chek Guide Me Simply Easy

  • Spill-resistant SmartPack vial lets you take one and spill none..
  • Accu-Chek Guide Me blood glucose meter with 2 coin cell (CR2032) batteries included.
  • Automatically logs results right to the free mySugr app on your smartphone..
  • Includes 1 drum Accu-Chek Fast Clix lancing device with 6 Lancets and 1 Carrying Case.
  • Large, easy to read display makes it simple to see test results..
Check Stock

Accu-Chek Aviva Plus Diabetes Meter for Diabetic Blood Glucose Monitoring (Meter Only)

  • Get accurate blood glucose results quickly and easily ​.
  • The Aviva Plus meter features a large, easy-to-read LCD display.
  • Gives test results in less than 5 seconds and stores 500 blood glucose results plus 20 control tests.
  • The Accu-Chek Aviva Plus meter will soon be discontinued.
  • Accu-Chek Aviva Plus test strips will continue to be available.
  • If ready for a new meter, consider the simply easy Accu-Chek Guide Me meter.
  • For over 40 years, Accu-Chek has been a leader in providing convenient and accurate diabetic management supplies.
  • Additional products sold separately include lancing devices, control solutions, blood glucose meters, and lancets.
Check Stock

Megadyne – Jason Industrial Accu-Link V-Belt - B-Link-6 – 0.66 Inch (21/32) Top Width x 6 Feet Length – Type B / 5L – Adjustable Link V-Belt – Detachable Tab Link V-Belt – (Pack of 1)

  • Jason Industrial Accu-Link Adjustable Link V-Belts Type B(5L) – 0.66 Inch Top Width x 6 Feet Length - are rugged design, field tested and made with the high-quality materials to sustain and survive in harsh conditions. The Jason Accu-Link V-Belts performance is guaranteed, Low Vibration on machines, achieve maximum Horsepower and manufactured to last longer. Can be used either as a single or on multiple V-Belt drives.
  • The Jason Industrial Accu-Link V-Belts are made with rugged Polyester Fabric impregnated with premium Urethane. The adjustable V-Belts are made to fit ARPM pulleys and working temperatures are -13 deg F ( - 25 deg C) to +176 deg F ( + 80 deg C)..
  • The Jason Industrial Accu-Link adjustable V-belts are easy to assemble by hand (no tools required), reduces inventory on Mobile Service trucks, rolls onto drive pulleys like chain – no cords to break, reduced vibration over conventional V-Belts and avoid labor intensive machine dis-assemblies in hard-to-reach areas of the machines..
  • Applications: There are thousands of applications for the Jason Industrial Accu-Link V-Belts. Some of them are Extraction Fans, Exhau....
Check Stock

Mitutoyo 188-130, Screw Pitch Gage, 0.35mm to 6mm, 22 Leaves

  • 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6mm and 60 degree angle gage.
  • Thread pitch size is stamped on each gage.
Check Stock