Top Accurate Flow Meter

ANNMETER Pro HVAC Anemometer- Air Flow Velocity Meter AN-826A 0.001~100Mph Wind Speed Gauge,Handheld Wind Tester Measuring Airflow Movement Temp with Max AVG Current

  • 【CFM Anemometer】Built with lightweight vane sensor to ensure sensitivity for accurate air flow measurement, Extendable cable and wand can extend to 79 inches, makes this cfm wind speed meter tester can easily reach to air outlet of AC, Vent..
  • 【Pro Airflow Air Velocity Meter】-Accurately measure wind speed ranging from 0.001~100Mph (+/- 5% of reading), wind temperature from 14~113℉(+/- 1.8℉). 5 wind speed units optional: m/s, Ft/min, Knots, Km/hr, Mph.
  • 【Wide Applications Wind Detector】-Handheld wind indicator not only can be applied in HVAC system installation and checking, dust vent detection, air conditioner maintenance, but also for outdoor activities: hiking, camping, boat sailing, sky surfing, shooting, drone Flying..
  • 【Humanize Designed Anemometer】-For continuous measurement, you can fix the gauge on a tripod with the thread hole at the bottom. Auto/ Manual power off function for battery saving. Backlight LCD provides clear reading in darkness or dim place..
  • 【Must Have One Air Flow Meter】-A solid storage case comes with AN-826A, for easy carrying and protecting damage from transport. Buy with confidence! For product defective or any further problem, ANNMETER provides you unconditional warranty!.
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

RX WELD Argon Mig Tig Flow Meter Gas Regulator Gauge with Gas Hose Welding Weld

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
  • 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
  • 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting..
  • 5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

AWLOLWA Argon CO2 Mig Tig Flow meter Welding Weld Regulator Gauge Gas Welder CGA-580 With 80'' (6.6FT) Hose

  • INLET - CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles.
  • OUTPUT - Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting.
  • The Square flow tube reads from 0 - 60 CFH ,which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to Read, Accurate.
  • 100% HIGH QUALITY AND STURDY - Flowmeter regulator is made of high quality brass and came with 6.6 Ft argon regulator Hose.
Check Stock

RX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
  • 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
  • 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
  • 5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..
Check Stock

TDS/pH/Temperature 3-in-1 pH Meter with ATC 0.01 High Precision Water Quality pH Tester Digital, pH Measurement Range with 0-14, pH Meter for Water Household Drinking, Pool and Aquarium

  • ✔️3-in-1 pH Meter - pH meter has a three-in-one function, which can measure pH, TDS and temperature with high precision at the same time. The detailed manual included will show you how to get the best accurate and stable reading..
  • ✔️Auto Calibration - Digital pH meter factory calibrated, but recalibration is needed in case of long period of inactivity or after a frequent use. pH 4.00/pH 6.86/pH 9.18 calibration powders are included. Push the auto-calibration button, the pH meter will automatically identify the calibration solutions..
  • ✔️ Accurate Testing - pH meter using a high sensitivity glass probe, the pH meter with a measurement range of 0-14.0 can quickly and easily read accurate pH values and can perform accurate tests within ± 0.01 pH range. The one-button lock reading feature helps lock the reading even when the pH meter is removed from the sample..
  • ✔️Mini Size - Lightweight and portable size allows you to take it around easily in your pocket and do your measuring anywhere. pH meter can help you test it whether you take it to the pool, on a trip, to the beach or camping..
  • ✔️Widely Used - Ideal for home or laboratory uses. Digital pH meter can be used to test drinking water, swimming pools, pH balance in aquarium, bath tu....
Check Stock

Argon Regulator Dual Co2 Flowmeter by Manatee for TIG MIG Welder Gas and backpurge 60 SFCH - CGA 580 inlet connection and 5/8 x 18RH outlet fitting - Accurate Gas Metering Delivery System

  • ✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking....
  • ✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon....
  • ✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more....
  • ✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has....
  • ✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings..
Check Stock

Bestarc Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Argon Gas Welding AGR-2

  • Argon / CO2 regulator and flow meter, suitable for most argon tanks, argon hose for Miller, Lincoln, Hobart, HTP, and most other welders.
  • The material of body is quality brass. Sturdy and durable.
  • Easy to use, gas regulator can be directly screwed into argon or argon / CO2 tank, ideal choice for MIG TIG welding, chemical and electronics industry.
  • Accurate to read, pressure gauge reads from 0 - 3500 PSI, and the square flow tube reads from 0-25 CFH.
  • We provide high quality products at fair price, one year warranty, professional after-sales service.
Check Stock

2 Pieces GM816 Digital Anemometer Handheld Wind Speed Meter LCD Backlight Wind Meter Light Weight Air Flow Meter Wind Indicator Speed Gauges Measurement Thermometer for Kite Flying, Sailing, Surfing

  • LCD display: 2 pieces GM816 handheld anemometers are included in the package, with LCD backlight display, after a long press on the mode button for 3 seconds to open and the LCD screen will light up, LCD backlight is more intelligent, so you can know the wind speed directly.
  • Accurate measurement: the measurements of this digital LCD backlight wind meter is stable and accurate, with wind speeds ranging from 0 to 65 m/s and the wind speed accuracy is 0.1 DGT.
  • Meanwhile, it can measure temperatures from minus 10 degrees to 45 degrees.
  • Multi-function measurement: the light weight air flow meter has 3 kinds of wind speed to choose, namely biggest wind speed, average wind speed and current wind speed, you can choose different gears according to the situation.
  • This anemometer measures wind speed in 5 choices, so you have a variety of options.
  • Data hold function: this wind speed meter can adjust Celsius or Fahrenheit temperature and record data through the built-in temperature regulator, and it comes with a yellow protective case and wrist strap.
  • Wide applications: these wind indicator speed gauges can be applied in a variety of applications, such as offshore operations, environmental monitoring, air conditioning systems, kite flying, sailing, surfing and other ....
Check Stock

Mass Air Flow Sensor Meter MAF 22680-7S000 AF10141 Compatible for Nissan Altima Infiniti G37 Suzuki, 07-13 Sentra, 05-15 Xterra, 03-09 350Z 3.5L, 09-15 370Z 3.7L, 03-15 Murano 3.5L, 05-08 G35 3.5L

  • Replacement MAF Sensor Compatible for 2007 2008 2009 2010 2011 2012 2013 Nissan Altima & 2005-2013 Armada & 2005-2013 Frontier & 2009-2013 Cube & 2004-2013 Maxima & 2006-2012 Pathfinder | Infiniti 2009-2012 FX35/FX50 & 2004-2013 QX56 & 2006-2010 M35 | 2009-2012 Suzuki Equator & MORE【NOTE】Before purchase this MAF Meter, please use the year/make/model drop down bar confirm the compatibility or description to confirm the compatibility.
  • Replace Part Number: 22680-7S000, MF21058N, 336-60644, 226807S00A, 22680-CA000, 74-500036, 86-50036, AF10141, AFH70M-38, AFH70M38, 33660644, 226807S000, 22680CA000, 74500036, 8650036.
  • Fast Response Time: 15 ms. Please clean out the air box and replace the air filter before installating this Mass Air Flow Sensor Meter, or the Code and Check Engine Light may keep showing even if you replace a new MAF.
  • Mass Air Flow Meter MAF Sensor measures the volume and density of air entering the engine, providing highly accurate airflow readings to the ECU over a wide range of ambient temperatures.
  • Warranty: If you meet any problem, Any defective, any dissatisfied, Please directly contact our customer Service. We provide "No reason to refund" Service.
Check Stock

Wood Moisture Meter for Firewood - Digital Moisture Meter for Wood Pin Type Wood Moisture Tester Water Leak Detector Dampness Tester Meter for Wood Building Material With Visual High-Medium-Low Alerts

  • ...r using the lumber and hardwoods? Choose a moisture meter for lumber to locate the location of moisture buildup! Our moisture meter for wood is designed with 2 high precision pins, penetrate into the test surface to help find hidden water,mold and leaks in walls and surfaces, detect the moisture content of firewood accurately and quickly,give a reliable result for you..
  • More Accurate and Quicker Measuring the Moisture Level than Other Moisture Meters - High-quality moisture meter will ensure accurate moisture reading at all times! Our wood moisture meter consists of advanced technology to be accurate within ±2% of the wood’s moisture content, which enough to yield more accurate moisture testing results. Whether you’re constructing a building or crafting furniture, this moisture detector is ideal for quickly testing the moisture content in the wood materials..
  • The Same Model of Moisture Meter for Firewood in the Offline Supermarket - Do you want to find a wood moisture meter for woodworking with high-quality and low cost of offline supermarket same model? We prepared this moisture tester for you. Our products have been tested offline and have received rave feedbacks, so we boldly put them online for sale to provide you with high-quality wood hu....
Check Stock