Top Acoustical Ceiling

INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
Check Stock

DESA Specialty Products 78708 Powder Actuated 1/2\ - 2-1/2\ Remington 476 Power Hammer

  • Slim tool. Fits in tight spaces. 13.75" x 6" x 1.5". Weighs only 3.00 lbs. Automatic piston return. (Pole NOT included)..
  • For use in Acoustical, Electrical and Mechanical overhead applications. Fastener length: 1/2" to 1-1/4".
  • Uses standard .27 cal. 10 shot strip loads. Power levels: Brown (2), Green (3), Yellow (4), Red (5)..
  • For Structural Steel, Masonry Joints and Poured Concrete Fastening..
  • BP-27C IS NOT A STAND-ALONE TOOL. IT MUST ALWAYS BE USED MOUNTED ON A BLUEPOINT PMXXX Series (Magnesium), NPMXXX Series (Magnesium) OR NPXXX Series (Aluminum) Multi-function Ceiling Poles. The front adapter has 3/4” -16 SAE threads. If you use any other brand pole, please ensure that it is strong enough..
Check Stock

Soundsulate Acoustical Ceiling Tile Sound Barrier, Foil Faced Mass Loaded Vinyl Soundproofing with 1″ Duct Liner Decoupler, 16″ X 30″

  • Combines 1lb/sf, 1/8″ thick foil-faced mass loaded vinyl with a 1″ thick Bonded Glass Fiber Blanket Decoupler..
  • Use as a ceiling tile noise barrier or anywhere that you would install fiberglass insulation and require sound control.
  • Significantly higher performance than 1 LB MLV. Excellent thermal and acoustical performance, STC rating of 29, R-Value: 4.1.
  • Fire Rating: Class 1 or A per ASTM E84, ASTM C1338-00, ASTM CM411-05, ASTM C665, ASTM C795, ASTM 1304 and UL723.
  • Sold in lots of ten 16″ x 30″ pieces.
Check Stock

Johnson Level & Tool 99-026K Self-Leveling Horizontal Rotary Laser System w/ Hard Case Kit, 50 x 14.5\

  • ...sual and audible alarms that alert you when the rotary is beyond its leveling range and the locking pendulum that protects the inner pendulum during transportation..
  • APPLICATIONS: This rotary laser may be used to check cut and fill, set foundations and footings, concrete pours, septic tanks and basement excavations, acoustical ceiling and drywall, align and plumb walls, level deck floors, set drainage, terracing, and more..
  • ROTATIONAL SPEEDS: This manual rotary laser with illuminated vertical vial supports variable rotational speeds of 200-600 RPM. A variable RPM allows the user to set the laser to the speed that provides the optimum visibility..
  • PRODUCT SPECIFICATIONS: The kit includes a Laser with 800' working diameter, NiMH rechargeable battery pack, 6V battery charger, detector with clamp and 9V battery, tripod, 13' grade rod, wall/ceiling mounting bracket, magnetic target, tinted glasses, and hard-shell carrying case..
  • Locking compensator protects inner mechanisms.
Check Stock

Wagner Spraytech Wagner 2439395 Power Tex Texture Sprayer, Yellow

  • TEXTURE SPRAY GUN: The Wagner Power Tex paint sprayer is designed to apply a textured finish on your ceiling, walls, and other hard surfaces.
  • THREE NOZZLES INCLUDED: Use the included interchangeable nozzles to expertly create acoustical popcorn, knockdown, and orange peel textures.
  • LOCK-N-GO TECHNOLOGY: Simple design allows for quick set-up. Simply lock the air turbine onto the back of the spray gun, fit the 1 gallon paint hopper into place on top, and select your nozzle.
  • ADJUSTABLE HOPPER: Easily position the hopper for when spraying either walls or ceilings. The hopper's three-point stand will stabilize the unit when set on the ground and the built-in arm rest keeps you comfortable.
  • NO AIR COMPRESSOR REQUIRED: The paint spray gun features a built-in air turbine that eliminates the need for a separate compressor or air hose.
Check Stock

INSL-X SXA11009A-04 Stix Acrylic Waterborne Bonding Primer, 1 Quart, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • 75 - 100 square foot coverage for interior or exterior use.
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock

Ships Within 1 Biz Day from NV - Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board - Ships Within 1 Biz Day from NV

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Fannie May Harry London Gourmet Chocolates S'mores Snack Mix Crunchy Cereal & Fluffy Chocolate-Covered Marshmallows - 18 oz.

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock

Sper Scientific 850016 Acoustical Calibrator

  • Sper Scientific 850016 2 Pt. Acoustical Calibrator | Conforms to ANSI S1.4-1984 and IEC942 1988 Class 2 standards for acoustical calibrators. Conforms to ANSI S1.4-1984 and IEC942 1988 Class 2 standards.
Check Stock

Johnson Level & Tool 40-6502 Manual-Leveling Rotary Laser, Red, 1 Laser

  • LASER LEVEL: This Johnson Self Leveling Kit is ideal for various indoor and outdoor jobs. Its small and large scan modes simulate a laser chalk line, while the horizontal and vertical planes provide the manual-leveling feature..
  • MODES: The self-leveling rotary laser level may release a simultaneous 90° split beam in the vertical mode, increasing the level's versatility. This 4 “AA” alkaline battery powered level has scanning modes like 0°, 30°, and 60°..
  • SCAN LINES: This manual-leveling rotary laser system features scan lines that can easily be moved in either clockwise or anticlockwise direction. This feature makes this level useful for a variety of applications in construction and more..
  • ROTATIONAL SPEEDS: This manual rotary laser supports variable rotational speeds of 150-300 RPM. A variable RPM allows you to set the laser to the speed that provides the optimum visibility..
  • APPLICATIONS: This rotary laser may be used to check cut and fill, set foundations and footings, concrete pours, septic tanks and basement excavations, acoustical ceiling and drywall, align and plumb walls, level deck floors, set drainage, terracing, and more..
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock