Top Add a circuit Fuse

SENSTREE 12 AWG Gauge ATC/ATO Fuse Holder, Car Inline Water-resistant Fuse Holder Automotive Blade Fuse Holder 5pcs with 100pcs Auto Standard Blade Fuses, 2A 3A 5A 7.5A 10A 15A 20A 25A 30A 35A

  • ☀【High quality and good material】: Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • ☀【5pcs 12 guage/awg fuse holders】: Heavy Duty 12 AWG Fuse Holders, protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and etc..
  • ☀【100pcs auto car standard blade fuse】: 2A / 3A / 5A / 7.5A / 10A / 15A / 20A / 25A / 30A /35A car fuse, 10pcs each..
  • ☀【Waterproof cap of fuse holder】: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof..
  • ☀【Suitable for ATC/ATO type fuses】: Rated current: 41A, always select the correct current rating before installing or replacing the fuse. Widely used for cars, trucks, Jeeps, ATVs, UTVs, SUVs, boats, etc. Adding circuit protection for car alarms, GPS, car recorder, dashboard camera, VCD player, etc..
Check Stock

Painless Performance 70207 Weatherproof Cirkit Boss Auxiliary Fuse Block, 7-Circuits (3 Constant/4 Ignition)

  • Safe way to add electrical accessories to any vehicle.
  • First circuit isolator system available with both constant and ignition hot circuits.
  • Provides three 20-amp constant hot and four ignition hot circuits with a maximum total amperage handling of 40 Amps.
  • Includes: Weatherproof 40-amp SPST relay, weatherproof 50-amp circuit breaker, weatherproof relay base/fuse block with harness, weatherproof crimp-on heat-shrinkable terminals, weatherproof fuse block cover and mounting hardware.
  • Protects your OEM and is easy to install.
Check Stock

E Support 12V 24V Standard Add A Circuit Fuse Tap Piggy Back Blade Holder Plug Socket Car Pack of 5

  • Protects Original Circuit and Provides A Lead For New Circuit.
  • High Quality Copper wire make sure excellent electrical conductivity..
  • Compatible with mini blade fuses, ideal for car alarm, dash cam, GPS, Cell phone charger, other electronic devices..
  • Easy installation of additional circuits without splicing or cutting.
  • Package include: 5 x Add A Circuit fuse holder and 5 x 15A Standard fuse.
Check Stock

4 Pack Car Cup Holder Coaster, 2.75 Inch Diameter Non-Slip Universal Insert Coaster, Durable, Suitable for Most Car Interior, Car Accessory for Women and Men (Red)

  • Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
  • Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the fuse box..
  • Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.
  • Multipurpose: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing.
  • Wide Compatibility: 3pcs low profile mini fuses adapter with 5 Amp low profile mini blade fuse fits for Korean Cars.
  • 4pcs mini fuse adapter with 15 Amp mini blade fuse fits for Japan and US Cars.
  • 3pcs standard fuse adapter with 5 Amp standard blade fuse fits for European Cars.
Check Stock

YOTINO 12V 24V Standard Add-a-Circuit Fuse Tap, ACU Medium Piggy Back Blade Fuse Holder with Wire Harness, 6 pcs Standard Fuse (3A 5A 7.5A 10A 15A 20A) and Fuse Puller (Pack of 4)

  • FITS YOUR VEHICLEATO ATC standard 6.3mm blade fuses and stand up to 20 AMP each slot, suitable for any vehicle with a standard fuse slot.
  • INSTALL APPLICATIONSYOTINO 12v/24v add-a-circuit kit makes your car battery positive so you can hardwire a 12V radio, LED light strip, dash cam, GPS, backup camera or any other small electronic device that requires direct wiring into the fuse box.
  • NO SPLICING REQUIREDAdd devices and accessories to your vehicle with compatible sized fuses without cutting into wires,2 fuse slot providing protection for existing/new circuits, tap the fuse box to power additional electronic devices with no need to cut or splice.
  • EASY INSTALLATION1. Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap. 2. Insert a suitable fuse for the new accessory in to the top slot. 3. Crimp your new live wire to the butt terminal on the fuse tap.
  • PACKAGE CONTENT4 pack fuse holder kit, 1 pcs fuse puller and 6 pcs standard fuse (3A 5A 7.5A 10A 15A 20A)total 19 pcs accessories referring picture 1.
Check Stock

KOLACEN Automotive Car Truck 2 Pieces 16 Gauge Add-a-Circuit Fuse TAP Adapter for Standard Blade Type Fuse + 8 Pieces Fuse 5Apm 7.5Apm 10Apm 15Apm (Standard 10A15A)

  • 2 pcs 16 awg gauge auto add-a-circuit fuse tap adapter, suitable for regular standard fuses.
  • Mainly used in the car original circuit to add new circuit, easy to install, without damage to the original car circuit.
  • 8 pcs car standard fuse (APR / ATC / ATO / ATS) 10A 15A, each has 4pcs.
  • Voltage rating: less than 32V DC, Rated current: less than 15A.
  • High quality material, ROHS compliant, wire length: 15cm.
Check Stock

Bussmann CB285-30 Surface-Mount Circuit Breakers, 30 Amps (1 per pack)

  • Each 250A Circuit Breaker comes with two 1/0 AWG copper wire lugs with 1/4" holes, two 15mm heat shrink tubes (one red, one black), two 1" stainless steel self-tapping sheet metal hex-head screws with rubber padded metal washers, two rubber washers & 4 copper washers. The hardware is designed to allow the circuit breaker to be attached to a sheet metal surface, although wood screws (not included in this kit) can be used with the copper washers to attach to a wood or fiberglass substrate..
  • These circuit breakers are an excellent way to protect you car, truck, boat or RV's DC accessories in the event of a short circuited or overloaded condition. When tripped, this DC breaker will remove power to the circuit & place itself in a visibly noticeable "tripped" condition, but can easily be reset by manually flipping the red reset lever back into the dc circuit breaker housing. It is a resettable fuse that can also by manually "tripped" by depressing the red button on top of the breaker..
  • This 250 amp breaker is an auto or marine circuit breaker that can also be used as a power disconnect switch. It is an excellent solution for placing between a battery and 250 Amp Accessory, to use as an amp disconnect switch, as a main 250 amp marine circuit breaker, as a car....
Check Stock

10 Gauge Fuse Holder ATC/ATO 4 Packs in-Line Automotive Blade Fuse Holder with 24PCS Standard Car Fuses 15A 20A 25A 30A 35A 40A Automotive Replacement Fuses

  • Heavy Duty 10 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and etc..
  • Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
  • Pretty waterproof for all-weather applications.Widely used in solar cell circuit,RVs, motorcycles, etc..
  • Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof..
  • Package included: 4 pack inline fuse holder + 24pcs car fuses sets ( 15A / 20A / 25A / 30A /35A / 40A) 4pcs each..
Check Stock

UNEEDE 10 Pack Fuse Inline Fuse Holder ATC/ATO Add-a-Circuit Car Fuse Holder TAP Adapter 16 Gauge 20AMP Blade Automotive Fuse Holder Waterproof Heavy Duty Wire Fuse Holder with 10 pcs 15 AMP Standard

  • SAFETY PROTECTION: Heavy duty 16 AWG fuse holder, great look and added protection to the circuit. And easy to add additional circuits for all cars, CD players, fax machines, etc.
  • SUITABLE FOR MUITILPLE FUSES: Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A ATC/ATO blade fuse.
  • WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is inline fuse holder extremely safe and reliable.
  • SUPERIOR QUALITY: High-quality materials ensure high fatigue resistance, melting resistance and excellent electrical conductivity which allows easy installation of additional circuits without cutting or spicing.
  • PACKAGE INCLUDE: 10 x 16AWG 5.9in ATC/ATO Blade Fuse Holder with 10 pcs 15AMP Standard fuses.
Check Stock

Car Charger, TOLLEFE 24W 4.8A Dual Port Cigarette Lighter Fast USB Car Charger RGB LED Light Car Charger Adapter Compatible with iPhone 14 Pro Max/13/12/11,Samsung S22/S21/S10/S9/S8

  • 2 pcs 16 awg gauge auto add-a-circuit fuse tap adapter, suitable for regular standard fuses.
  • Mainly used in the car original circuit to add new circuit, easy to install, without damage to the original car circuit.
  • 8 pcs car standard fuse (APR / ATC / ATO / ATS) 10A 15A, each has 4pcs.
  • Voltage rating: less than 32V DC, Rated current: less than 15A.
  • High quality material, ROHS compliant, wire length: 15cm.
Check Stock

12-Way 12V Blade Fuse Block, 12 Volt Automotive Fuse Box Holder Waterproof with Negative Bus 5A 10A 15A 20A Fuse Panel LED Indicator for Auto, RV, Car, Boat, Marine, Truck

  • [12 way fuse block+24pcs fuse SET]12 LED Indicator Design--This 12 way fuse block with 12 fuse pieces and each circuit has its own led indicator light. Easy to know when problem occurs and fix it..
  • Installation easier and safer----Fuse block made of stainless steel, the fuse box is input, and the output end is fixed by tightening screws, which can be installed more quickly, and the safety box is fixed by self-tapping screws..
  • Nice Cover FUSE block----Cover made of Clear PC mterial(With clear, vibration resistant & snap fit cover), keep your fuse box safe from splash and dust resistant, add an extra protection for your fuse..
  • High Quality & Safety Material---Made of environment friendly PBT material, IP86, CE Certification, blade fuse box is mechanically strong, heat and flame resistant and help you get rid of problems like broken, deformation, combustion or short circuit..
  • Wide application-----12 Way fuse block widely used in cars, marines, tankers, boats, rv, truck, moto homes,suv, yacht, ships etc..
Check Stock

Bussmann BP/SL-15 15 Amp Time Delay Loaded Link Rejection Base Plug Fuse, 125V UL Listed Carded, 3-Pack

  • Non Tamp, Dimensions: 1. 83"L x 0. 917"W x 0. 417"H.
  • No-interchangeability prevents installing a higher amp fuse than the circuit was designed for.
  • Has ability to withstand typical motor starting surges.
  • Use in residential or light-duty motor circuits.
Check Stock