Top Adhesive Film For 3d Printing

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12\ x 12\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 10\ x 10\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

LANKEGU 3 PCS nFEP Film 260x200x0.127mm NFEP Film Sheet, nFEP(PFA) Release Film fo ELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch LCD Resin 3D Printers

  • NFEP film is big improvement over traditional fep film: Better durability, fewer layer lines, accurate print results, Great for Resin Printing..
  • High print success rate: NFEP Film offers excellent peel performance over standard FEP film. As such you will have much less failed prints as compared to using FEP films, and prints don't stick to nfep nearly..
  • High transmittance: The 3D release nfep film has high transmittance, and the transmittance is over 95%, which makes the printed products more perfect and provides product quality..
  • Easy to install, thinner than fep: simply follow the instructions comes with the package, you can easily replace the NFEP film in a few minutes. (NOTE: NFEP is softer than standard FEP and thus easier to scratch.Please use caution when installing and cleaning.).
  • NFEP Film is the best choice for printing a perfect model: 260*200*0.127mm nFEP(PFA) Release Film fit fo rELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch resin 3D Printers..
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 8" x 8" (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

Creality Fireproof and Dustproof 3D Printer Warm Enclosure Mini 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro Constant Temperature Protective Cover Room

  • Constant Temperature: Creality 3D Printer Tent Keep a constant temperature printing environment, reducing the bad impact on printed models when....
  • Inner Size: 17.5*22.2*26.9 inch. Compatible with Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 5 Pro.A good mate for your 3D printing..
  • Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself....
  • Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room. There are....
  • Extensive functionality: Dustproof and good noise reduction. Our 3D printer tent can reduce noise to a certain extent when printing, It can be used as....
Check Stock

ELEGOO Saturn 8K MSLA Resin 3D Printer and ELEGOO Mercury XS Bundle with Separate Washing and Curing Station

  • Large Model Printing: ANYCUBIC Photon Mono X 6K 3d printer has a max print volume of 9.6 x 7.8 x 4.8 inches. The large volume can not only print multiple models at a time, effectively improve work efficiency, but also fully meet the needs of printing large-size models..
  • 9.25" 6K Monochrome Screen: The 9.25" resin 3d printer 6K screen has 5760 x 3600 Px, and ultra-high resolution brings vivid details. The life of the monochrome screen is 4X longer than that of the ordinary LCD screen. Added replaceable scratch resistant film, which greatly reduces the damage rate of the LCD screen..
  • Powerful UV Light Source: The Photon Mono X 6K 3d printer with 40 bright LED lamp beads, the newly upgraded 40 LED matrix parallel UV light source, the strong light source distribution is more uniform, so that Anycubic Photon Mono X 6K 3d resin printer can quickly and accurately display the details of each part of the model, showing high quality models..
  • High Light Transmittance & Fast Printing: The fast LCD 3D printer using the industry-leading 6% light transmittance screen, the printer's fastest printing speed can reach ....
Check Stock

Phrozen Sonic Mighty 4K Large LCD Resin 3D Printer, 9.3' Mono LCD Screen & 22cm Z-axis, Matrix LED UV Light Tech, L7.9 x W4.9 x H8.7 Printing Volume, for Large 3D Models, Miniatures, or Tabletops

  • 【Bigger Printing Area & A Taller & Stronger Z-axis】Sonic Mighty 4K provides a 9.3” printing area that empowers makers to print bigger and larger quantities in a single batch. Phrozen Sonic Mighty 4K comes with a 22 cm Z-axis and dual-linear rails, allowing creators to produce tall and spectacular tabletops, such as gigantic dragons or large ogres. The stronger Z-axis also prevents the 3D printer from wobbling, which provides the user with a stable and reliable printing process..
  • 【High 4K Resolution】With its large printing capability, Sonic Mighty 4K doesn’t compromise its printing precision. Monochrome LCD printing also allows the 3D printer to print up to 4 times faster than traditional 3D printers. Rapid prototyping greatly improves printing efficiency and increases efficiency by printing out each layer in only two seconds. In addition, each Phrozen 3D printer LCD is guaranteed to have 2000 working hours while a free 3-month warranty is also offered..
  • 【Quality Prints and Consistent Success】Phrozen Sonic Mighty 4K’s matrix light source consists of 54 UV LED lights with uniform light emission.
  • this ensures superior print results and accurate printing size. The set screws on the sides of the building plate also ensure longer-lasting le....
Check Stock

ANYCUBIC Photon Mono 4K 3D Printer, 6.23'' Monochrome Screen Upgraded LCD SLA UV Resin 3D Printers with Fast & Precise Printing and Large Printing Size 5.20''X3.14''X6.50''

  • [High-speed 3D Resin Printer]: ANYCUBIC Photon MONO 4K 3D printer is upgraded with 4k monochrome LCD with 35um XY pixels, is one of the greatest accuracies in 3D printing field. The 7% high light transmittance could absorb higher curing UV power for faster printing and curing speed, the single-layer exposure and curing time is as low as 1.5s. The printing speed can reach up to maximum 50mm/h. 2.5X faster than original 2k printer..
  • [4K High Resolution & Higher Accuracy]: This newly high resolution 3840×2400 MONO 4K resin printer has smaller pixel and sawtooth texture, to print more delicate and smooth surface.
  • and MONO 4K uses a high contrast ratio more than 350:1 monochrome screen, which makes the image in the exposure areas more accurate and produce highly-detailed prints with clearer and sharper edges and corners, thus improving the quality and success rate of printing, also greatly reducing the residue in resin vat..
  • [6.23″ Large Screen & Larger Print Size]: The Photon Mono 4K is equipped with a decent 6.23″ screen, which is 29% larger than the Anycubic Photon’s 5.5” in screen area. It can also print up to 6.5×5.2×3.1in at a time, which offers your creations more possibilities..
  • [Adjustable Power & Universal Compatibility]: With 30%-100% l....
Check Stock

Phrozen Sonic Mini 4K LCD Resin 3D Printer, Matrix LED UV Light Tech, Monochrome/Mono LCD Screen, Longer Working Hours, for Jewelry-Making and Miniatures, Printing Volume: L5.2 x W2.9 x H5.1

  • 【Ultra 4K Printing Precision】 3840 x 2160 Ultra-high-definition With 4K resolution, Sonic Mini 4K prints out all your models at 35µm with 722 PPI, the highest PPI ever! 3D printing enthusiasts are empowered to print out extremely detailed miniatures and small tabletops with the highest precision level. Sonic Mini 4K is also the ideal choice for jewelry makers to create intricate jewelry pieces. Sonic Mini 4K gives a boost to all the creators out there..
  • 【Mono-LCD Screen】Sonic Mini 4K has a 6.1″ Monochrome LCD screen, which allows the 3D printer to print up to 4 times faster than traditional 3D printers. Rapid prototyping greatly improves printing efficiency and increases efficiency by printing out each layer in only two seconds. In addition, each Phrozen 3D printer LCD is guaranteed to have 2000 working hours while a free 3-month warranty is also offered..
  • 【Ample Printing Volume】 Just because you’re printing all your models with ultra-high-resolution, doesn’t mean that the size of your prints has to be sacrificed. Sonic Mini 4K has a decent chamber size of 5.2″ x 2.9″ x 5.1″, which provides you with sufficient area to print out most 3D models. Sonic Mini 4K is also compact & lightweight, easy to store, and fits in a variety of ....
Check Stock

R3D Mini FDM 3D Printers,Premium Quality & Precision with Sturdy 1-Piece All-Metal Enclosed Housing,Heated Removable Magnetic Build Plate Stable XYZ Construction and Resume Printing,SD & USB Print

  • 【Ultra 4K Printing Precision】 3840 x 2160 Ultra-high-definition With 4K resolution, Sonic Mini 4K prints out all your models at 35µm with 722....
  • 【Mono-LCD Screen】Sonic Mini 4K has a 6.1" Monochrome LCD screen, which allows the 3D printer to print up to 4 times faster than traditional 3D....
  • 【Ample Printing Volume】 Just because you’re printing all your models with ultra-high-resolution, doesn’t mean that the size of your prints has....
  • 【Multi-Resin Compatibility】Sonic Mini 4K is compatible with the majority of 3D printing resin on the market. For the ideal printing experience, we....
  • 【User Satisfaction Guaranteed】 Phrozen provides a one-year warranty on all 3D printers (excluding consumable parts such as LCD screen & FEP film)....
Check Stock

3M 9425/TRL0572 Scotch 9425 Removable Repositionable Tape: 1/2" x 72 yd, Translucent

  • 3M 9425 Removable Repositionable Tape is a translucent UPVC film differentially coated with a removable/repositionable, medium tack, adhesive on one side (back/liner side) and a permanent, high tack, adhesive on the other (face/exposed side). Industries 3M 9425 is used in includes electronics.
  • The medium-tack adhesive allows removal from many foils and films without adhesive residue. In many cases, the tape can be reused numerous times. The user should perform specific tests to determine the product’s suitability for the particular application..
  • The UPVC film carrier on the tape provides differential stability which offers improved handling for laminating and die-cutting. 3M 9425 is used for repositioning or multiple openings and closings and works on a variety of substrates or materials for temporary adhering, affixing, mounting, holding, attaching, and positioning of lightweight materials such as paper, photographic paper, plastics, films, foams, and cardboard..
  • Carrier/Backing: unplasticized polyvinyl chloride (UPVC) film. Adhesive: acrylic. Release Liner: 58# polycoated Kraft paper..
  • Thickness: 5.8 mils (carrier, adhesive) 4.4 ....
Check Stock

Polarized Film Sheets 2 PCS 7.8x5.9in/ 20x15cm Adhesive Polarizer Linear Polarizing Filter for Screen Educational Physics

  • Polarization: Linear, Size: 7.8x5.9in/ 20x15cm, Thickness: 0.22mm..
  • Polarizing film with adhesive: Both sides have protective film, one side is adhesive. Before you use it, please peel off film..
  • Wide Application: Used for Motorcycle dashboard display, projector screen, electronic watch screen..
  • How to use: After the polarizer is cleaned of dust, adjust the angle, cut it into the corresponding shape, and stick it on for use..
  • Package: 2 x Polarizing film sheet. Note: Not suitable for 3d printer..
Check Stock