Top Adhesive Tie Mount

Black Cable Tie Zip Self Adhesive Mounts Set, Cable Base Holders with Multi-Purpose Sticky Pads 100 sets

  • 【Package Contents】100 Pack of Adhesive Cable Tie Mounts, Cable Tie Bases can be used with any cable which width less than 8mm..
  • 【Great Material】The self-adhesive cable tie brackets are made of high-quality, and lightweight m, materials. The self-adhesive materialize contains super glue, which is durable. The configured cable tie has strong friction, which can keep your cable neat..
  • 【Easy to Use】Cable tie mounts without tools. Simply peel off the backing paper and place firmly on a clean, dust-free surface for best adhesion. Use the built-in screw hole for added strength. Flexible tip ensures easy insertion into the head, locking teeth stop the cable tie at the desired length..
  • 【Practical Set】These cable tie sticky pads can be installed quickly, can make your cables more tidy and orderly, and save your space greatly. Cable tie base holders contain strong adhesive Suitable for clean, flat, and dry places. Please clean the surface of the dust before use..
  • 【Wide application】Strong cable tie base holders can be used in many applications, including at home, in the office, in the workshop, on the computer / PC, on the television, or in the room. This can make your cables, wires, and cables tidier. You can also use only tie wraps. Creative ap....
Check Stock

Screwless Corner Mount for Ring Indoor Cam VHB Stick On - Easy to Install No Tools Needed No Mess No Drilling Strong Adhesive Mount White by Brainwavz

  • Never lose another GoPro camera. These flat & curved adhesive mount pads for go pro are industrial-strength waterproof, perfect for all weather....
  • Heavy duty durable mount buckle mount. you need an adhesive mount that does not break during your thrilling rides. Made of lightweight PC plastic and....
  • Broad range of compatibility. MiPremium adhesive mounts are widely compatible with all GoPro Hero 10, 9, 8, 7, 6, 5, 4 HERO (2018) models and all....
  • Removable adhesive sticker pads. The adhesive mount can be cleanly removed by applying heat (e.g. using a hair dryer) to adhesive bond to peel it off....
  • Get more for your money. Our helmet adhesive sticky mount kit for GoPro action cameras contains 10 units in total.
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

6pcs 3M Sticky Adhesive Replacement Parts for Socket Base, VOLPORT Circle Double Sided Tape for Collapsible Grip Stand's Back, 2pcs VHB Sticker Pads for Cell Magnetic Phone Car Mount Holder

  • VERY VERY IMPORT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-come up-press red film back-peel again. 2. Adhesive can’t hold cell phone, please don’t not stick adhesive on very soft, rugged, texture surface’ phone case, it may not stick well. 3. Last but the most important rule, wait 24 hours after stuck. 4. Please contact us immediately if you have any problems, we are here..
  • LIVE TO COMPATIBLE WITH COLLAPSIBLE GRIP: VOLPORT new top 3M sticky adhesive flex tape pack is exclusively designed to compatible with phone grip back&base.
  • extra strong and easy to change skin gel for grip. Big vhb sticky tape fit perfect phone grip base&back.
  • small double side sticky adhesive compatible with magnetic car mount&holder’s back replacement. Best cover replacement sticker parts ever, great but cheap magic gift for boys and girls, man and woman..
  • 6 PIECES BIG ADHESIVE STIKER BACK BASE: We adopt original 3m VHB super adhesive gel, which is 40% stronger than ordinary black glue, high temperature and low temperature resistance. Big stickey adhesive great compatible with base&backing..
Check Stock

6 Pack 53mm(2.09inch) Adhesives for Suction Cup Replacement, AZXYI Windshield Mount Adhesive Replacement Kit, Compatible with Mounting Disk, GPS Dash Cam and Socket Car Dashboard Suction Cup Mount

  • 【6Pcs Adhesives Replacement for Suction Cup Mount 】AZXYI offers 6 Pcs round sticky adhesive pads(Diameter: 53mm,2.09") , which can help to fix your Garmin GPS mount, Phone mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Try AZXYI super suction cup adhesive replacement for lock sucker. Never fall again!.
  • 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield..
  • 【Work as Wireless Charger Mount】The strong adhesion of these sticker pads help firmly lock the Wireless Charger into the needed place, allow your phone easily separated from the charger with one hand after charging, and protect your charger from possible falling damage..
  • 【Very High Bond】These high-strength, double-sided adhesive pads let you quickly and easily ....
Check Stock

Woodzdon 140 Pcs Car Wire Loom Routing Clip Push Mount Cable Tie Assortment Heavy Duty Nylon 10 Different Size Automotive Wiring Harness Self Locking Zip Ties Strap Convoluted Conduit Universal Fit

  • Routing Clip Conduit Size: 1/4 inch, 11/32 inch, 13/32 inch, 1/2 inch, 3/4 inch, Fits 1/4 inch Hole.
  • Push Mount Cable Tie Overall Length: 3-21/32 inch, 4-27/32 inch, 6-9/64 inch, 6-3/4 inch, 6-57/64 inch.
  • Made of Heavy Duty Black Nylon, UV Resistant.
  • Contains: 10 Different Sizes, 90 Pcs Wire Loom Routing Clips and 50 Pcs Push Mount Cable Tie.
  • Replacement for GM 12040984, 8911473, 8911497, 8911472, 3816659, 8917320.
  • Replacement for Auveco 19440, 14544, 14545, 14546, 14547.
  • Product Name: Routing Clips for Wire Loom, Split Flexible Tubing, Split Flexible Tube, Convoluted Conduit, Wiring Harness, Wire Harness Routing Clip, Push Mount Cable Tie, Push Mount Cable Zip Tie, Car Push Mount Strap Cable Tie, Self Locking Tie.
  • 10 Different Size, Fits Most Popular Car Models. Such as for Ford F-150 2001, for Lincoln Navigator 2006, for Chrysler 300 2007, for Dodge Trip 2010, for Ram 1500 2004, for Lexus RX300 2002.
  • for Toyota Camry 2000, for Tacoma 2016, for RAV4 2008.
  • Fitment: for GM, for Buick, for Cadillac, for Chevrolet, for GMC, for Oldsmobile, for Pontiac, for AMC, for Dodge, for Jeep.
  • Application: Trim Panels, Door Trims, Door Panels, Bumpers, Fender, Hood and Splash Guard, also for Indoor Wire Tying.
Check Stock

Gorgeri Adjustable Dash Mount Compass Navigation Hiking Direction Pointing Guide Ball for Marine Boat Truck Auto Car Outdoor

  • 【Portable Dash Mount Compass】Portable stand compass with adhesive tape on the bottom for car truck dashboard mount.
  • 【Outstanding Function】With the pointer pointing the dial, high precision and easy to read.
  • 【Quality Plastic Material 】It is made of high quality weathering resistant and durable plastic, high reliability.
  • 【Compact Design】Compact design, small enough not to block your sight while you driving or navigating.
  • 【Widely Fitment】Suitable for your car, truck or boat, also suitable for cycling, hiking or other outdoor activities.
Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
  • Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....
Check Stock

VANTRUE N1 Pro, X4, X1, X1 Pro, X2, R2 Adhesive Dash Cam Windshield Mount

  • Adhesive dash cam windshield mount for a second vehicle or to replace a damaged or lost mount. Works well for Vantrue N1 Pro,X4, X1, X1 Pro dash cam..
  • Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
  • Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera.
  • The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your window.
  • Package included: 1 windshield adhesive mount, 1 Sticky Adhesive Tape.
Check Stock

6 Pack Adhesives for Suction Cup Mount, AZXYI 53mm(2.09inch) Sticky Adhesive Replacement Kit, Compatible with Car Dashboard Pad Mounting Disk, GPS Dash Cam Suction Cup Mount and Socket Mount

  • 【6Pcs Adhesives Replacement for Suction Cup Mount 】AZXYI offers 6 Pcs round sticky adhesive pads(Diameter: 53mm,2.09") , which can help to fix your Garmin GPS mount, Phone mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Try AZXYI super adhesive for lock sucker. Never fall again!.
  • 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard or windshield..
  • 【A Great Addition for Wireless Charger】The strong adhesion of these sticker pads help firmly lock the Wireless Charger into the needed place, allow your phone easily separated from the charger with one hand after charging, and protect your charger from possible falling damage..
  • 【Very High Bond】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various surfaces wherever you want, like car dashboard, Car Dash, Windshield & Desktop..
Check Stock

Vantrue N2 Pro N2 T2 R3 X3 Dash Cam Micro USB Port Car Windshield Adhesive Mount

  • Adhesive dash cam windshield mount for a second vehicle or to replace a damaged or lost mount. Works well for Vantrue N2 Pro, N2, X3, T2, R3 dash cam..
  • Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength..
  • Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera.
  • The slide mount system allows you to easily remove the dash cam for storage or travel, and you can remove the adhesive mount without damaging your....
  • Package included: 1 windshield adhesive mount, 1 Sticky Adhesive Tape..
Check Stock

Sticky Adhesive Replacement for Windshield Camera Holder, AZXYI 6pcs 2.76''(70mm) VHB Circle Double-Sided Adhesive Tapes for Dashboard Suction Cup Mount, Mounting Disk Pads, Dash Cam/GPS/Sucker Holder

  • 【Strong Sticky Adhesive】These extra strong both side clear adhesion pads' stickiness is 40% stronger than ordinary adhesive. The heat resistant performance of these circle adhesive double-sided mounting adhesive tapes for dash cam mount reaches 120°C+, you can use it without worry in hot Summer. Easy to fix on your car phone socket base, or heavy duty dashboard mount base, you can drive uber, truck, vehicle security in bumpy roads..
  • 【6Pcs Clear Adhesives Replacement】We offer 6 Pcs round clear sticky adhesive pads(Diameter: 70mm, 2.75") for attaching dashboard pad mounting disk to your car dashboard . You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup..
  • 【Cut into any size you need & Compatible With Suction Base】You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market..
  • 【Easy to Install】Provided rounded rectangle raised label to easily p....
Check Stock