Top Adjustable Arm Stand
InnoGear Microphone Stand, Desk Mic Stand Adjustable Boom Arm Stand with 3/8' to 5/8' Screw Adapter Mic Clip for Blue Yeti, Yeti Nano, Snowball and other Mic
- Height & Angle Adjustable: By rotating the height clutch, the height of stand is adjustable from 10.8 inches to 14 inches. The boom arm swivels and has a good range of motion. The included mic clip can be rotated by 180°. Easy to use and set up the height and angle you want..
- Lengthened Boom Arm: The telescoping boom arm is upgraded to two-section, compared to single-section arm of others on the market. The length of boom arm is adjustable from 16 inches to 28 inches. Sturdy, silent and great reach. Noted: When it goes to the max length, recommended to have the second pole remained 1 inch inside the boom arm..
- Enhanced Load-bearing: One 1.1lbs solid counterweight is fixed to one end of the boom arm, improving the load-bearing capacity. When the arm is at the min length of 16 inches, it reaches the max load of 6.6lb/3.0kg and when the arm is at the max length of 28 inches, it reaches the min load of 3.3lb/1.5kg. Strong enough to hold your microphone steadily while in use..
- Upgraded Table Mounting Clamp: With the mounting position of the stand in the center, the upgraded desk clamp could stably clip to any desktop up to 2.2 inches thick. The diameter of metal gasket is increased to 38mm to enlarge contact surface and further enhance stability. A rubber p....
Check StockErgonomic Laptop Stand For Desk, Adjustable Height Up To 20\
- ...l sizes from 10 inch tablets to 17 inch laptops including MacBook Air, Pro, 10, 13, 15, 15.6 and 17 inch laptops. You can USE IT WHILE SITTING OR STANDING. With it's cool design, it even keeps your laptop cool so that it DOESN'T OVERHEAT..
- EASILY ADJUSTED! Our multi-use UPRYZE Laptop stand was designed as an amazing adjustable computer pulpit stand that CAN EASILY BE ADJUSTED for zoom conferences and meetings, watching a movie, video gaming or can even be used for cooking as a cookbook stand. it's just an amazing gifted notebook stand. The UPRYZE computer stand was specially designed so that you can USE IT AS A STANDING DESK in addition to your regular desk. It's FOLDABLE DESIGN keep your office uncluttered..
- STANDING DESK MEASUREMENTS! The UPRYZE computer stand is perfect for use as a PORTABLE STANDING DESK and can be adjusted easily to achieve the correct height and angle. The top base RISES UP TO 20 INCHES from the floor of the stand and the ARM EXTENDS up to 13 inches. In addition to that, the arm has 20 different arm lengths so the laptop pulpit stand can adjusted according to your needs. Use our portable standing desk when needed at full height and EASILY PACK IT AWAY when you sit down..
- GRAB ALONG IN YOUR BACKPACK! Never miss out using your "POST....
Check StockMicrophone Arm Stand, FIFINE Suspension Boom Scissor Mic Stand with Heavy Duty Clamp, 3/8\ to 5/8\ Adapter, for Voice-over, Gaming, Recording, Studio, Home Office (CS1)
- ADJUSTABLE AND FLEXIBLE - The suspension scissor boom arm stand in fully adjustable in all parts. The arms of the desk mic stand are extensible in 135° back and forth, and 180° up and down, enabling you to adjust the suitable angle and height to show your perfect voice. Work with Fifine K669B, K670, K683A, K658, AmpliGame (A6V, A8) usb microphones..
- STRONG STABILITY - Fifine microphone boom arm is made of high quality metal and are more robust. The two springs work together and are more durable. In addition, the whole arm is attached to three knobs, when using the arm, the three knobs are locked at the same time, and it is very stable..
- FOLDABLE AND SPACE-SAVING - This desktop mic stands for USB microphone is relatively free of the desktop space and the desk clamp only needs to be fixed on the table sides. So you can put your own things on the rest space and save a lot of desktop space. It means this arm is also suitable for someone whose table is smaller. It is foldable so that you can carry it to where you want to go, such as stores, studios, TV stations, etc..
- UPGRADED DESK CLAMP of MIC STAND- In comparison to other versions, this metal desk clamp is built with anti-scratch pad and wider mouth up to 2" to fit most desktop. It also has a fixed ....
Check StockBoom Arm For Hyperx Quadcast Microphone Adjustable Suspension Mic Scissor Stand For Studio Recording & Broadcasting Compatible with Hyper X QuadCast S Mic By YUZUHOME
- Adjustable Microphone Stand: The adjustable microphone arm can be folded up and easy for you to carry around. This feature enables to adjust the....
- Strong Compatibility :3/8'' to 5/8'' Screw adapter are line with industry standards.mic arm could compatible with HyperX QuadCast S and hyperx....
- Upgraded Desk Mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2" to fit most....
- Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for Hyperx quadcast mic carry. Max....
- Note: Package Not included Hyperx quadcast microphone. Package Including 1x HyperX quadcast Arm Stand,1x adapter (Fit HyperX quadcast),1 x table....
Check Stock2-Tier Column Keyboard Stand with Mic Boom Arm by GRIFFIN | Double Sliding Multi Mounting Platform Red Stage Tower Rack | Holder for Digital Piano Turntable DJ Audio Gear Studio Laptop Synthesizer
- ..., mobile, and super sturdy, 2 tier synthesizers stand that will safely hold your keyboards. Ideal for the recording studio or on stage, this double column keyboard stand with sliding arms synthesizer holder will stand the weight of almost all keyboards and synths and go without a hitch for a really long time..
- FULLY ADJUSTABLE PIANO KEYBOARD STAND PERFORMANCE HEIGHT: Offering unparalleled comfort and convenience, whether you play seated or standing, this 2-tier dj controller stand allows you to adjust the height with its featured sliding level mounting arms are fully height adjustable. The sleek and stylish red color style column helps you stand out from the competition and will protect your stand from daily wear and keep it looking like new for years to come!.
- ROCK SOLID DJ TABLE STAND SLIDING COLUMN STRUCTURE FOR UNMATCHED STABILITY: This red tower keyboard stand is specially designed with a lock feature and rubber end caps on the legs to ensure maximum support and stability. The tilt-back angle design allows your keyboards to rest secure while at a user-friendly position allowing you to focus on your music..
- DJS TRAVEL LIGHT WITH INCLUDED MIC BOOM ARM ATTACHMENT: Boasting an impressively light-weight design, this column keyboard stand includes a full....
Check StockJUSMO Camera Desk Mount with Auxiliary Holding Arm, Overhead Camera Mount with 360° Ballhead and Phone Grip, Table C-Clamp Multi Mount Stand for DSLR, Phone, Light, Webcam and More
- Desk mount stand 17.3-41.3 inch adjustable, gives you ample height for overhead shooting and lighting. And 14 inch auxiliary holding arm for cameras, lights, phone and More..
- Desk mount stand and auxiliary holding arm all have standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter. Comes with phone grip, 2.2-3.9 inch can work with most smartphones..
- Secure more gear to your Desk mount stand. A single steel pole that clamps horizontally onto Desk mount stand, solid arm provides an auxiliary mounting point for a camera, light or smartphone and more..
- The arm can be installed at the lower two sections of the main pole to ensure stability(Height up to 28.7 inch), can not be clamped to the top section. The arm optimal load-bearing 1KG(2.2lbs) and Max 1.5KG(3.3lbs), so heavier equipment can be mounted on the pole top, and lighter equipment on the arm for stability..
- This camera&cellphone desktop overhead video stand suitable for baking, crafting, online lesson, document display, live stream broadcast, video recording, phone scanning and other scenes..
- NOTE: It is recommended to adjust the your required height of the Desk mount stand before installing the Auxiliary holding arm. And if you need adjust the height of Desk moun....
Check StockMic Stand with Foam Windscreen For Blue Snowball, Suspension Boom Scissor Arm Stand with Pop Filter Cover for Microphones iCE USB Mic by SUNMON
- Adjustable Mic Stand : Suspension boom arm stand fit your Blue Snowball suitable, streaming, podcasting and Skype calls,Record vocals, create podcasts, home movies.you can easily adjust the mic to show your perfect voice..
- Super Windscreen: Foam pop filter designed for Blue Snowball iCE with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality..
- Stability: Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise..
- Blue Snowball Arm Mount: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
- Package included: 1x Windscreen only for Blue Snowball, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones and shock mount)..
Check StockInnoGear Microphone Stand, Adjustable Mic Arm Max Load 1.8KG Microphone Suspension Boom Scissor Arm Stand Compact Mic Stand for Blue Yeti, Blue Snowball iCE, Streaming, Recording, Gaming, Podcasting
- Upgraded & Durable Mic Stand: Two strong springs are hung inside the upper arm, there will be no noise when moving the arm. The lower arm is three-tube which is more stable than other only double-tube arms..
- Lengthened & Foldable: The arm length is up to 15 inches while the bottom can be rotated 360° and the upper arm can be adjustable in 180° up and down. It allows you to freely position microphones within adjustable range and remember to tighten the knob once the arm direction is located..
- Sturdy Material & Improved Max Load: It is made of sturdy steel and the thicker arm can bear up to 4 lbs of weight. You could safely connect the microphone within the weight limit without worrying it will fall due to being too heavy..
- Stable & Useful Clamp: The upgraded clamp is added with plastic plug to protect from scratches when screwing the arm to the clamp. And the thread of the fixing screw is lengthened to make the stand more stable..
- Universal & Strong Compatibility: Package includes a microphone stand, a table mounting clamp, a mic clip holder, 5 cable ties and a 3/8″ to 5/8″ metal screw adapter to make it perfect for Blue Yeti, Yeti Pro, Yeti Nano, Blue Snowball and other microphones..
Check StockKasonic Microphone Stand Heavy Duty Adjustable Collapsible Tripod Boom Mic Stands with 2 Mic Clip Holders for Performance Karaoke Singing Speech Wedding Stage and Outdoor Activity - Black
- Heavy Duty Mic Stand - Kasonic microphone stand remains upright and steady thanks to its sturdy tripod base. Made of Heavy Duty Sturdy steel....
- 2 Arms & 2 Micphone Holders - The large arm extends to an incredible 52 inches, and the small arm offers both extendability and 360° rotation. New 2....
- Collapsible & Adjustable - This mic stand folds flat, ensuring easy transport from maximum convenience. There're three adjustable legs, which makes....
- Tripod Mic Stand - 29 - 52 inch height-adjustable tripod floor stand holds microphone securely in place. Adjustable legs for placing on uneven....
- Practical - It's a great tool to use at the conference room, church, and other public places. An elegant outlook suits all kinds of occasion - studio....
Check StockDouble DJ Laptop Stand by FAT TOAD | 2 Tier PC Table Holder | Portable Computer Clamp Equipment Rack with Duel Mounts for Music Studio Mixers, Controllers, Monitors, CD Player & Disc Jockey Booth Gear
- SAVE SPACE IN YOUR DJ BOOTH AND SECURE YOUR DJ GEAR WITH THIS ADJUSTABLE LAPTOP TABLE STAND: Featuring 2 convenient tiers that will safely hold two laptops or other equipment, such as table-top CD players, DJ mixer controller, monitors, digital mixers, or effects units, this portable double computer stand will save space in your studio or office and make your expensive devices easily accessible and comfortable to use..
- DJ CONTROLLER STAND HEAVY DUTY CONSTRUCTION: Made to handle the weight of even the heaviest of your DJ gear, this deluxe computer laptop table will safely hold your equipment in place. The arm mount lips and special, padded cushions stabilize your gear and protect the devices’ metal finish and color, so you don’t need to worry about unsightly scratches. The bottom flat metal platform of the stand can also be used for placing a third unit, offering even more storage options..
- LAPTOP STAND ADJUSTABLE HEIGHT: ADJUST TO YOUR CHANGING NEEDS: The two tiers are fully removable and adjustable, offering unique versatility and convenience. Both levels can be easily adjusted in height from 2 to 15.5 inches (measured from the base). Also, the tiers on the Fat Toad laptop music stand are constructed in such a way, to allow for a 360 degree swivel....
Check StockLuling Arts Microphone Arm, Upgraded Mic Arm Micropone Stand with Pop Filter Boom Suspension Stand for HyperX QuadCast, Blue Yeti, Snowball, Yeti x ,Gaming , Podcasts
- 【Upgraded Mic Arm Leg】The microphone arm Improved from hollow to solid leg,no longer break or shake. more stable and stronger.Will not break the legs, the market will break the legs after 6 months of use..
- 【Mic Stand with Pop Filter】Adjustable microphone stand with U-shaped three layer pop filter, reduce the plosive, wind interference,Compatible for HyperX Quadcast,RODE NT1,AT202 USB+ and more diameter of 46mm-53mm microphones..
- 【Stability Range of Motion】The boom arm with Super-strong spring, compact boom mic arm stand designed for heavy duty carry. Max load: Approx.53oz/1.5kg. Easily Rotating or height Movement to show your perfect voice..
- 【Upgraded Desk Mount Base】:The Suspension mic boom arm Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2" to fit most desktop..
- 【Complete Microphone Stand bundle 】The boom mic stand bundle comes a 3/8” to 5/8” screw adapter,a microphone arm stand, a table clamp, a mic pop filter, a manual,5pcs cable ties ..
Check StockNeewer 13feet/390cm Two Way Rotatable Aluminum Adjustable Tripod Boom Light Stand with Sandbag for Studio Photography Video
- 【Heavy Duty Light Stand】 Made of 100% robust stainless steel, this C stand can mount strobes, monolights, reflectors, softboxes, umbrellas, and....
- 【Adjustable Height & Extension Arm】 The center column with 3 sections is adjustable from 4.8ft to 10ft (146cm to 305cm) with a foam grip to....
- 【Metal Grip Heads】 The grip heads can lock the extension arm with a firm grip and allow flexible angle adjustment. Four holes in each grip head....
- 【Foldable Turtle Base】 Turtle base with nonslip pads allows sandbag placement for adding stability without scratching the floor (sandbags not....
- 【Package Contents】 1 x Sliver C Stand, 1 x Turtle Base, 1 x Extension Arm, 2 x Grip Head.
Check Stock